Marco Maria Scuderi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Marco Maria Scuderi has a total of 132 co-authors. Here are the top co-authors by number of shared publications:
- Cristiano Collettini
Sapienza Università di Roma
34 shared publications - Carolina Giorgetti
Dipartimento di Scienze della Terra La Sapienza Università di Roma Rome Italy
18 shared publications - Chris Marone
Department of Geosciences Pennsylvania State University University Park PA USA
18 shared publications - Federico Pignalberi
Dipartimento di Scienze della Terra La Sapienza Università di Roma Rome Italy
16 shared publications - Giacomo Mastella
Sapienza University of Rome, Earth Sciences, Rome, Italy
12 shared publications - Brett M. Carpenter
University of Oklahoma Norman OK USA
11 shared publications
Latest Publications
- Open Access
- 16 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
From fragmentation to fault zone architecture as a structural framework for fault weakening
- 16 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessFrom fragmentation to fault zone architecture as a structural framework for fault weakening
- Open Access
- 22 July 2026
- Published by Springer Nature in Research Square
Seismic Energy Partitioning Across the Continuum of Laboratory Fault Slip Modes
Understanding the physical controls on the transition between slow and fast earthquakes remains a fundamental challenge in earthquake physics. Here we study simulated earthquake fault zones and show that both slow and fast slip can emerge under identical stress conditions. The transition between slip modes is governed by the elastodynamic interaction between the fault and its surroundings. By systematically varying fault loading stiffness at constant normal stress, we observe a continuous spectrum of slip behavior from stable sliding to slow events and ultimately fast rupture. Continuous acoustic monitoring reveals distinct seismic signatures: slow slip produces swarms of acoustic emissions, which are the equivalent of microearthquakes, while fast slip generates higher-amplitude energy bursts. We evaluate the energy release in the full range of lab earthquakes from slow to fast and find a continuous scaling of the breakdown work with seismic moment, which supports a unified physical mechanism. Moment-duration scaling highlights a key transition in energy partitioning: in slow events, acoustic energy accounts for a minor portion of slip duration, whereas in fast events it contributes a much larger portion, indicating a shift in how seismic energy is radiated across slip modes. Our results suggest that slow and fast earthquakes are not distinct phenomena but reflect end-members of a fault slip continuum.
- 22 July 2026
- Published by Springer Nature in Research Square
Open AccessSeismic Energy Partitioning Across the Continuum of Laboratory Fault Slip Modes
Understanding the physical controls on the transition between slow and fast earthquakes remains a fundamental challenge in earthquake physics. Here we study simulated earthquake fault zones and show that both slow and fast slip can emerge under identical stress conditions. The transition between slip modes is governed by the elastodynamic interaction between the fault and its surroundings. By systematically varying fault loading stiffness at constant normal stress, we observe a continuous spectrum of slip behavior from stable sliding to slow events and ultimately fast rupture. Continuous acoustic monitoring reveals distinct seismic signatures: slow slip produces swarms of acoustic emissions, which are the equivalent of microearthquakes, while fast slip generates higher-amplitude energy bursts. We evaluate the energy release in the full range of lab earthquakes from slow to fast and find a continuous scaling of the breakdown work with seismic moment, which supports a unified physical mechanism. Moment-duration scaling highlights a key transition in energy partitioning: in slow events, acoustic energy accounts for a minor portion of slip duration, whereas in fast events it contributes a much larger portion, indicating a shift in how seismic energy is radiated across slip modes. Our results suggest that slow and fast earthquakes are not distinct phenomena but reflect end-members of a fault slip continuum.
- Open Access
- 10 July 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (14)
Fault Geometrical Control on Fault Slip: Experimental Validation of Theoretical Models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress‐drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high‐resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double‐bends to self‐similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is, scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- 10 July 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (14)
Open AccessFault Geometrical Control on Fault Slip: Experimental Validation of Theoretical Models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress‐drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high‐resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double‐bends to self‐similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is, scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Fluid-assisted frictional healing revealed by ultrasonic waves
The seismic potential of a fault is controlled by its ability to regain strength between earthquakes (fault healing). Variations in healing rate among different rock types can cause local locking and elastic strain energy accumulation, potentially leading to earthquake nucleation. The 2016 Mw 6.5 Norcia mainshock nucleated in the Triassic Evaporites, the seismogenic layer of central Italy, composed of dolostones and anhydrites. Despite its relevance, the mechanical behavior of anhydrite remains relatively less constrained compared to other common crustal lithologies. Only a limited number of studies have systematically investigated the frictional properties of anhydrite, suggesting that its mechanical behavior is strongly sensitive to boundary conditions.We conducted room humidity (RH) and water-saturated (WS) Slide-Hold-Slide (SHS) friction experiments on anhydrite gouge to assess and isolate the role of water on its healing properties. To inform mechanical data with the microphysical evolution of the fault, we used piezoelectric (PZT) sensors in transmission mode, which record ultrasonic S-wave (UW) propagation through the sample. Finally, mechanical and ultrasonic measurements were complemented by microstructural analyses of the post-mortem sample.Our results show that fault healing follows a log-linear dependence on hold time under both RH and WS conditions, but with markedly different magnitudes. Water-saturated experiments exhibit a healing rate nearly three times larger (β ~ 0.024) than RH experiments (β ~ 0.009). Ultrasonic measurements reveal a systematic log-linear increase in S-wave velocity during hold periods. This growth is significantly more pronounced in WS samples, where S-wave velocity increases by more than ~2.8% per decade of hold time, compared to ~1% in RH conditions. Microstructural observations indicate that RH samples deform through distributed cataclastic processes accommodated by multiple R-shear bands, whereas WS samples exhibit extreme strain localization along B-shear zones characterized by intense grain-size reduction and the development of a compressive foliation, consistent with semi-brittle deformation.These results demonstrate that water fundamentally alters the healing efficiency and deformation style of anhydrite faults. Moreover, they show that ultrasonic wave measurements provide a powerful, independent tool to track fault restrengthening during simulated interseismic periods. The observed increase in S-wave velocity can be directly linked to an increase in the shear modulus of the gouge, which appears to be greater in the presence of water, probably due to fluid-assisted healing processes. Together, the high healing rates and the mechanical stiffening of the microstructure inferred from S-wave velocity measurements suggest that anhydrite gouge may be capable of efficiently accumulating elastic strain energy during interseismic periods. Our findings suggest that fluid-assisted healing in anhydrite-bearing fault zones may play a critical role in controlling fault stability and seismic behavior in natural settings.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessFluid-assisted frictional healing revealed by ultrasonic waves
The seismic potential of a fault is controlled by its ability to regain strength between earthquakes (fault healing). Variations in healing rate among different rock types can cause local locking and elastic strain energy accumulation, potentially leading to earthquake nucleation. The 2016 Mw 6.5 Norcia mainshock nucleated in the Triassic Evaporites, the seismogenic layer of central Italy, composed of dolostones and anhydrites. Despite its relevance, the mechanical behavior of anhydrite remains relatively less constrained compared to other common crustal lithologies. Only a limited number of studies have systematically investigated the frictional properties of anhydrite, suggesting that its mechanical behavior is strongly sensitive to boundary conditions.We conducted room humidity (RH) and water-saturated (WS) Slide-Hold-Slide (SHS) friction experiments on anhydrite gouge to assess and isolate the role of water on its healing properties. To inform mechanical data with the microphysical evolution of the fault, we used piezoelectric (PZT) sensors in transmission mode, which record ultrasonic S-wave (UW) propagation through the sample. Finally, mechanical and ultrasonic measurements were complemented by microstructural analyses of the post-mortem sample.Our results show that fault healing follows a log-linear dependence on hold time under both RH and WS conditions, but with markedly different magnitudes. Water-saturated experiments exhibit a healing rate nearly three times larger (β ~ 0.024) than RH experiments (β ~ 0.009). Ultrasonic measurements reveal a systematic log-linear increase in S-wave velocity during hold periods. This growth is significantly more pronounced in WS samples, where S-wave velocity increases by more than ~2.8% per decade of hold time, compared to ~1% in RH conditions. Microstructural observations indicate that RH samples deform through distributed cataclastic processes accommodated by multiple R-shear bands, whereas WS samples exhibit extreme strain localization along B-shear zones characterized by intense grain-size reduction and the development of a compressive foliation, consistent with semi-brittle deformation.These results demonstrate that water fundamentally alters the healing efficiency and deformation style of anhydrite faults. Moreover, they show that ultrasonic wave measurements provide a powerful, independent tool to track fault restrengthening during simulated interseismic periods. The observed increase in S-wave velocity can be directly linked to an increase in the shear modulus of the gouge, which appears to be greater in the presence of water, probably due to fluid-assisted healing processes. Together, the high healing rates and the mechanical stiffening of the microstructure inferred from S-wave velocity measurements suggest that anhydrite gouge may be capable of efficiently accumulating elastic strain energy during interseismic periods. Our findings suggest that fluid-assisted healing in anhydrite-bearing fault zones may play a critical role in controlling fault stability and seismic behavior in natural settings.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
A Continuum of Laboratory Fault Slip Reveals Distinct Seismic Energy Partitioning from Slow to Fast Slip
Understanding the physical controls on the transition between slow and fast earthquakes remains a fundamental challenge in earthquake physics. Here we show, through laboratory experiments on granular quartz gouge simulating natural fault zones, that both slow and fast slip can emerge on the same fault under identical stress conditions. The transition between slip modes is governed by the elastodynamic interaction between the fault and its surroundings. By systematically varying system stiffness at constant normal stress, we observe a continuous spectrum of slip behavior from stable sliding to slow events and ultimately fast rupture. Continuous acoustic monitoring reveals distinct seismic signatures: slow slip produces swarms of small events, while fast slip generates high-amplitude energy bursts. Continuous scaling of breakdown work with seismic moment supports a unified physical mechanism. Moment-duration scaling highlights a key transition in energy partitioning: in slow events, acoustic energy accounts for a minor portion of slip duration, whereas in fast events it contributes a much larger portion, indicating a shift in how seismic energy is radiated across slip modes. These findings suggest that slow and fast earthquakes are not distinct phenomena but reflect end-members of a fault slip continuum.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessA Continuum of Laboratory Fault Slip Reveals Distinct Seismic Energy Partitioning from Slow to Fast Slip
Understanding the physical controls on the transition between slow and fast earthquakes remains a fundamental challenge in earthquake physics. Here we show, through laboratory experiments on granular quartz gouge simulating natural fault zones, that both slow and fast slip can emerge on the same fault under identical stress conditions. The transition between slip modes is governed by the elastodynamic interaction between the fault and its surroundings. By systematically varying system stiffness at constant normal stress, we observe a continuous spectrum of slip behavior from stable sliding to slow events and ultimately fast rupture. Continuous acoustic monitoring reveals distinct seismic signatures: slow slip produces swarms of small events, while fast slip generates high-amplitude energy bursts. Continuous scaling of breakdown work with seismic moment supports a unified physical mechanism. Moment-duration scaling highlights a key transition in energy partitioning: in slow events, acoustic energy accounts for a minor portion of slip duration, whereas in fast events it contributes a much larger portion, indicating a shift in how seismic energy is radiated across slip modes. These findings suggest that slow and fast earthquakes are not distinct phenomena but reflect end-members of a fault slip continuum.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Complex interaction between brittle and ductile rheologies in slow laboratory earthquakes
Earthquakes originate from frictional instabilities that nucleate and propagate along faults cutting through a multilayered crust. Geological observations show that fault zones are complex structures often composed of heterogeneous mineral assemblages with contrasting frictional rheologies, whose interaction strongly influences slip behavior during fault reactivation. Two major earthquakes (Mmax > 6) that struck central Italy in the past 30 years–the 1997 Colfiorito and 2016 Norcia events–nucleated within Triassic Evaporites (TE) consisting of anhydrites and dolostones. Previous laboratory experiments on stick-slipping faults in TE gouges highlighted the key role of shear zone fabric in controlling breakdown processes and slip dynamics. However, the individual contribution of each lithology to frictional failure mode remains unclear.Here we present preliminary results from laboratory friction experiments on powdered TE samples aimed at disentangling the role of anhydrite and dolostone in controlling fault slip behavior and dynamics in TE faults. We conducted double-direct shear experiments on three gouge compositions: 100% anhydrite, 50:50 anhydrite-dolostone, and 100% dolostone. The experimental procedure comprises two main stages: (i) a fabric development phase, in which the gouge is sheared under 50 MPa normal stress at a load-point velocity of 10 μm/s; and (ii) a fault reactivation phase at boundary conditions designed to enhance frictional instabilities that are: normal stress reduced to 30 MPa, a low-stiffness element inserted in series with the shear loading axis, and re-shearing at 1 μm/s. We also monitored the evolution of the fault physical properties from fabric development to stick-slip, via an ultrasonic system that continuously transmits and receives acoustic waves through the experimental fault.During the fabric development stage, all three fault gouges display stable sliding with a friction coefficient μ of ~ 0.6. In the fault reactivation stage, anhydrite faults exhibit slow (v < 20 μm/s), repetitive stick-slip with small stress drops (Δ𝛕 < 0.1 MPa), whereas dolostone faults accommodate shear through stable sliding. Interestingly, the 50:50 anhydrite-dolostone mixture does not exhibit intermediate behavior between the two end-members but instead develops larger (0.1 < Δ𝛕 < 0.4 MPa), yet generally slower (v < 10 μm/s), slip instabilities, indicating a nonlinear mechanical interaction between anhydrite and dolostone.Post-experiment microstructural analyses reveal that single-component gouges deform via cataclastic flow and frictional sliding along boundary and Riedel shear bands. In contrast, the 50:50 mixture exhibits extremely localized boundary shear planes dominated by nanometric dolostone particles embedded within foliated anhydrite-dolostone S-C structures. These features suggest a significant contribution of ductile, distributed deformation to energy dissipation during slow frictional ruptures. Ongoing ultrasonic wave analyses aim to characterize the relationship between the evolution of the elastic properties of the fault gouge, its internal structure, and the resulting slip behavior.Our results provide new insights into the complex interplay between different frictional rheologies within fault zones of the seismogenic layer of northern Apennines, and highlight the role of compositional heterogeneity in controlling fault slip dynamics and energy dissipation.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessComplex interaction between brittle and ductile rheologies in slow laboratory earthquakes
Earthquakes originate from frictional instabilities that nucleate and propagate along faults cutting through a multilayered crust. Geological observations show that fault zones are complex structures often composed of heterogeneous mineral assemblages with contrasting frictional rheologies, whose interaction strongly influences slip behavior during fault reactivation. Two major earthquakes (Mmax > 6) that struck central Italy in the past 30 years–the 1997 Colfiorito and 2016 Norcia events–nucleated within Triassic Evaporites (TE) consisting of anhydrites and dolostones. Previous laboratory experiments on stick-slipping faults in TE gouges highlighted the key role of shear zone fabric in controlling breakdown processes and slip dynamics. However, the individual contribution of each lithology to frictional failure mode remains unclear.Here we present preliminary results from laboratory friction experiments on powdered TE samples aimed at disentangling the role of anhydrite and dolostone in controlling fault slip behavior and dynamics in TE faults. We conducted double-direct shear experiments on three gouge compositions: 100% anhydrite, 50:50 anhydrite-dolostone, and 100% dolostone. The experimental procedure comprises two main stages: (i) a fabric development phase, in which the gouge is sheared under 50 MPa normal stress at a load-point velocity of 10 μm/s; and (ii) a fault reactivation phase at boundary conditions designed to enhance frictional instabilities that are: normal stress reduced to 30 MPa, a low-stiffness element inserted in series with the shear loading axis, and re-shearing at 1 μm/s. We also monitored the evolution of the fault physical properties from fabric development to stick-slip, via an ultrasonic system that continuously transmits and receives acoustic waves through the experimental fault.During the fabric development stage, all three fault gouges display stable sliding with a friction coefficient μ of ~ 0.6. In the fault reactivation stage, anhydrite faults exhibit slow (v < 20 μm/s), repetitive stick-slip with small stress drops (Δ𝛕 < 0.1 MPa), whereas dolostone faults accommodate shear through stable sliding. Interestingly, the 50:50 anhydrite-dolostone mixture does not exhibit intermediate behavior between the two end-members but instead develops larger (0.1 < Δ𝛕 < 0.4 MPa), yet generally slower (v < 10 μm/s), slip instabilities, indicating a nonlinear mechanical interaction between anhydrite and dolostone.Post-experiment microstructural analyses reveal that single-component gouges deform via cataclastic flow and frictional sliding along boundary and Riedel shear bands. In contrast, the 50:50 mixture exhibits extremely localized boundary shear planes dominated by nanometric dolostone particles embedded within foliated anhydrite-dolostone S-C structures. These features suggest a significant contribution of ductile, distributed deformation to energy dissipation during slow frictional ruptures. Ongoing ultrasonic wave analyses aim to characterize the relationship between the evolution of the elastic properties of the fault gouge, its internal structure, and the resulting slip behavior.Our results provide new insights into the complex interplay between different frictional rheologies within fault zones of the seismogenic layer of northern Apennines, and highlight the role of compositional heterogeneity in controlling fault slip dynamics and energy dissipation.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Heterogeneous Stress–Driven Shear Localization Governing Fault Slip in Decimeter-Scale Quartz Gouge under Variable Surrounding Stiffness
Fault slip stability is governed by the competition between the elastic energy stored in the surrounding medium and the rate of frictional weakening of the fault, which depends on its constitutive frictional properties. Laboratory shear experiments validate this framework under simplified conditions and homogeneous boundary conditions. In contrast, natural faults are heterogeneous across multiple scales, with variations in stress, frictional properties, fault-zone structure, and elastic properties as documented in laboratory, numerical, and field studies. In gouge-filled faults, heterogeneities are dynamically coupled: stress concentrations promote shear localization, which modifies gouge fabric that controls the frictional properties, ultimately dictating fault stability and rupture dynamics. Resolving how spatially heterogeneous stress and evolving fault-zone structure interact to control rupture nucleation and propagation therefore requires experimental approaches that move beyond homogeneous assumptions.Here we present results from large-scale biaxial shear experiments on a quartz gouge–filled fault (75 cm × 8 cm) using two forcing-block materials—Nylon 6 and PMMA—with different elastic stiffnesses. The fault was densely instrumented to investigate how stress heterogeneity and evolving shear fabric control slip behavior under different nominal normal stresses from 3 to 10 MPa and a constant loading rate of 10 µm/s. Far-field stress and displacement were monitored using load cells and LVDTs (1 kHz), while forcing blocks deformation was measured using Digital Image Correlation (DIC, 2–30 Hz). During laboratory earthquakes, local fault slip and volumetric deformation were recorded using eddy-current displacement sensors (1.25 MHz) and high-speed DIC (10 kHz). Emitted acoustic waves were recorded at 3.125 MHz using an array of 33 piezoelectric sensors calibrated through ball-drop tests, active-ultrasonic survey, laser vibrometry, and spectral-element waveform modeling.The experiments produce a broad spectrum of slip behaviors, from stable creep, slow ruptures to fast, dynamic events. Transitions from slow to fast slip are promoted by increasing normal stress and decreasing elastic stiffness. Co-seismic slip, peak slip velocity, and high-frequency acoustic energy increase systematically with cumulative fault slip, increasing normal stress, and decreasing loading stiffness. Direct measurements of slip enable estimation of the critical nucleation length, which decreases with increasing cumulative slip and normal stress, in agreement with theoretical predictions. Finite-element modeling shows that the experimental geometry induces heterogeneous stress distributions promoting the development of heterogeneous shear fabrics and spatially variable frictional responses. When shear fabric is well developed, normal stress is low, and the nucleation lengths are correspondingly large, stress heterogeneities have little impact on slip dynamics, which is dominated by system spanning events with regular, periodic seismic cycles. Conversely, at higher normal stress—conditions associated with smaller nucleation lengths—and/or poorly developed shear fabric, stress heterogeneity drives complex slip behavior, including partial and full ruptures and rupture cascades characterized by strongly spatially variable stress drops. These results highlight how the coupled evolution of stress, shear fabric, and frictional heterogeneities controls slip dynamics in gouge-filled faults.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessHeterogeneous Stress–Driven Shear Localization Governing Fault Slip in Decimeter-Scale Quartz Gouge under Variable Surrounding Stiffness
Fault slip stability is governed by the competition between the elastic energy stored in the surrounding medium and the rate of frictional weakening of the fault, which depends on its constitutive frictional properties. Laboratory shear experiments validate this framework under simplified conditions and homogeneous boundary conditions. In contrast, natural faults are heterogeneous across multiple scales, with variations in stress, frictional properties, fault-zone structure, and elastic properties as documented in laboratory, numerical, and field studies. In gouge-filled faults, heterogeneities are dynamically coupled: stress concentrations promote shear localization, which modifies gouge fabric that controls the frictional properties, ultimately dictating fault stability and rupture dynamics. Resolving how spatially heterogeneous stress and evolving fault-zone structure interact to control rupture nucleation and propagation therefore requires experimental approaches that move beyond homogeneous assumptions.Here we present results from large-scale biaxial shear experiments on a quartz gouge–filled fault (75 cm × 8 cm) using two forcing-block materials—Nylon 6 and PMMA—with different elastic stiffnesses. The fault was densely instrumented to investigate how stress heterogeneity and evolving shear fabric control slip behavior under different nominal normal stresses from 3 to 10 MPa and a constant loading rate of 10 µm/s. Far-field stress and displacement were monitored using load cells and LVDTs (1 kHz), while forcing blocks deformation was measured using Digital Image Correlation (DIC, 2–30 Hz). During laboratory earthquakes, local fault slip and volumetric deformation were recorded using eddy-current displacement sensors (1.25 MHz) and high-speed DIC (10 kHz). Emitted acoustic waves were recorded at 3.125 MHz using an array of 33 piezoelectric sensors calibrated through ball-drop tests, active-ultrasonic survey, laser vibrometry, and spectral-element waveform modeling.The experiments produce a broad spectrum of slip behaviors, from stable creep, slow ruptures to fast, dynamic events. Transitions from slow to fast slip are promoted by increasing normal stress and decreasing elastic stiffness. Co-seismic slip, peak slip velocity, and high-frequency acoustic energy increase systematically with cumulative fault slip, increasing normal stress, and decreasing loading stiffness. Direct measurements of slip enable estimation of the critical nucleation length, which decreases with increasing cumulative slip and normal stress, in agreement with theoretical predictions. Finite-element modeling shows that the experimental geometry induces heterogeneous stress distributions promoting the development of heterogeneous shear fabrics and spatially variable frictional responses. When shear fabric is well developed, normal stress is low, and the nucleation lengths are correspondingly large, stress heterogeneities have little impact on slip dynamics, which is dominated by system spanning events with regular, periodic seismic cycles. Conversely, at higher normal stress—conditions associated with smaller nucleation lengths—and/or poorly developed shear fabric, stress heterogeneity drives complex slip behavior, including partial and full ruptures and rupture cascades characterized by strongly spatially variable stress drops. These results highlight how the coupled evolution of stress, shear fabric, and frictional heterogeneities controls slip dynamics in gouge-filled faults.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Seismic imaging in the laboratory: Reframing fault stability using elastic-wave observables
A growing body of geophysical observations, numerical simulations, and theoretical studies indicates that the evolution of the internal structure of fault zones strongly influences fault slip behavior. However, the theoretical frameworks most commonly used to describe fault stability—such as rate-and-state friction—were originally formulated to represent frictional sliding at idealized laboratory interfaces, in which the fault is treated as an effectively two-dimensional boundary with implicitly prescribed contact-scale processes. As a result, these models do not explicitly account for the space–time evolution of fault-zone structure, including damage, granular reorganization, and fluid-mediated processes. Moreover, the state variables used to represent contact evolution are phenomenological and are only weakly constrained by seismological observations, limiting the ability of these formulations to be rigorously applied across spatial and temporal scales.Here, we propose an experimentally derived theoretical framework that reformulates fault stability in terms of internal variables directly linked to elastic-wave observables. Using double direct shear experiments on gouge layers under controlled boundary conditions, we combine mechanical measurements with active ultrasonic probing. Full waveform inversion is employed to reconstruct one-dimensional profiles of shear modulus and attenuation across the entire sample during normal and shear loading, stable sliding, and stick–slip events.Ultrasonic waves induce only a small perturbation in strain and therefore probe the linearized constitutive response of the system without modifying its internal state. In this context, effective elastic stiffness and attenuation can be treated as internal variables that encode the evolving fabric and organization of the fault zone. The inverted profiles reveal spatially localized regions within the gouge where elastic properties evolve during slip instabilities, enabling a data-driven identification of the dynamically active fault region, distinct from the mechanically inactive surrounding material.Based on these observations, we reframe the classical stiffness competition problem that defines the criteria for slip instability entirely in terms of observable quantities. Specifically, we propose to substitute the phenomenological state variable with the retrieved effective viscoelastic properties. Because elastic wave propagation obeys the same governing equations across laboratory and geophysical scales, this framework provides a physically grounded pathway for connecting laboratory experiments, numerical models, and seismological imaging of natural faults. More broadly, it represents a step toward a theory of fault mechanics grounded in seismological observables and geologically relevant fault-zone structures.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessSeismic imaging in the laboratory: Reframing fault stability using elastic-wave observables
A growing body of geophysical observations, numerical simulations, and theoretical studies indicates that the evolution of the internal structure of fault zones strongly influences fault slip behavior. However, the theoretical frameworks most commonly used to describe fault stability—such as rate-and-state friction—were originally formulated to represent frictional sliding at idealized laboratory interfaces, in which the fault is treated as an effectively two-dimensional boundary with implicitly prescribed contact-scale processes. As a result, these models do not explicitly account for the space–time evolution of fault-zone structure, including damage, granular reorganization, and fluid-mediated processes. Moreover, the state variables used to represent contact evolution are phenomenological and are only weakly constrained by seismological observations, limiting the ability of these formulations to be rigorously applied across spatial and temporal scales.Here, we propose an experimentally derived theoretical framework that reformulates fault stability in terms of internal variables directly linked to elastic-wave observables. Using double direct shear experiments on gouge layers under controlled boundary conditions, we combine mechanical measurements with active ultrasonic probing. Full waveform inversion is employed to reconstruct one-dimensional profiles of shear modulus and attenuation across the entire sample during normal and shear loading, stable sliding, and stick–slip events.Ultrasonic waves induce only a small perturbation in strain and therefore probe the linearized constitutive response of the system without modifying its internal state. In this context, effective elastic stiffness and attenuation can be treated as internal variables that encode the evolving fabric and organization of the fault zone. The inverted profiles reveal spatially localized regions within the gouge where elastic properties evolve during slip instabilities, enabling a data-driven identification of the dynamically active fault region, distinct from the mechanically inactive surrounding material.Based on these observations, we reframe the classical stiffness competition problem that defines the criteria for slip instability entirely in terms of observable quantities. Specifically, we propose to substitute the phenomenological state variable with the retrieved effective viscoelastic properties. Because elastic wave propagation obeys the same governing equations across laboratory and geophysical scales, this framework provides a physically grounded pathway for connecting laboratory experiments, numerical models, and seismological imaging of natural faults. More broadly, it represents a step toward a theory of fault mechanics grounded in seismological observables and geologically relevant fault-zone structures.
- Open Access
- 28 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (3)
Influence of the Loading Stiffness on Sheared Granular Fault Gouge, and Applicability to Slip‐Weakening Theory
Tectonic faults can slip in a spectrum of fault slip behaviors, from aseismic slip and slow ruptures to elasto‐dynamic earthquakes. Following frictional theory, laboratory experiments have shown that the basic ingredient that may control this transition is the interaction between the fault stiffness and the surrounding elastic medium. We aim at investigating the role of the loading stiffness on the seismic cycles in granular fault simulations. For this purpose, we build a numerical model based on the Discrete Element Method, inspired by laboratory friction experiments on fault gouge in the presence of an elastic loading system. The coupling between fault granular rheology and surrounding rock elasticity leads to seismic cycles with properties that are strongly influenced by the loading stiffness. Stiff fault systems generally produce frequent compactional events with limited sliding distances and low to moderate stress drops, while soft fault systems generally produce rare dilatational events with large sliding distances and stress drops. We show that, on average, simulated events are well‐described by a simple linear slip‐weakening friction law, but the weakening rate that best describes the events is tightly coupled with the loading stiffness. This contradicts the idea of an intrinsic friction law for the granular gouge layer and demonstrates the need to consider a fault as a tribological system coupling the scales of the granular gouge and of the elastic surrounding medium.
- 28 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (3)
Open AccessInfluence of the Loading Stiffness on Sheared Granular Fault Gouge, and Applicability to Slip‐Weakening Theory
Tectonic faults can slip in a spectrum of fault slip behaviors, from aseismic slip and slow ruptures to elasto‐dynamic earthquakes. Following frictional theory, laboratory experiments have shown that the basic ingredient that may control this transition is the interaction between the fault stiffness and the surrounding elastic medium. We aim at investigating the role of the loading stiffness on the seismic cycles in granular fault simulations. For this purpose, we build a numerical model based on the Discrete Element Method, inspired by laboratory friction experiments on fault gouge in the presence of an elastic loading system. The coupling between fault granular rheology and surrounding rock elasticity leads to seismic cycles with properties that are strongly influenced by the loading stiffness. Stiff fault systems generally produce frequent compactional events with limited sliding distances and low to moderate stress drops, while soft fault systems generally produce rare dilatational events with large sliding distances and stress drops. We show that, on average, simulated events are well‐described by a simple linear slip‐weakening friction law, but the weakening rate that best describes the events is tightly coupled with the loading stiffness. This contradicts the idea of an intrinsic friction law for the granular gouge layer and demonstrates the need to consider a fault as a tribological system coupling the scales of the granular gouge and of the elastic surrounding medium.
- Open Access
- 6 October 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 243 (3)
Combined boundary element and finite volume methods for modelling fluid-induced seismicity in fault networks within low-permeability rocks
SUMMARY: To better understand the mechanics of injection-induced seismicity, we developed a 2-D numerical code to simulate both seismic and aseismic slip on non-planar faults and fault networks driven by fluid diffusion along permeable faults, in an impervious host rock. Our approach integrates a boundary element method to model fault slip governed by rate-and-state friction with a finite-volume method to simulate fluid diffusion along fault networks. We demonstrate the capabilities of the method with two illustrative examples: (1) Fluid injection inducing slow slip on a primary rough, rate-strengthening fault, which subsequently triggers microseismicity on nearby secondary, smaller faults, and (2) fluid injection on a single fault in a network of intersecting faults, leading to fluid diffusion and reactivation of slip throughout the network. This work highlights the importance of distinguishing between mechanical and hydrological processes in the analysis of induced seismicity, providing a powerful tool for improving our understanding of fault behaviour in response to fluid injection, in particular when a network of geometrically complex faults is involved.
- 6 October 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 243 (3)
Open AccessCombined boundary element and finite volume methods for modelling fluid-induced seismicity in fault networks within low-permeability rocks
SUMMARY: To better understand the mechanics of injection-induced seismicity, we developed a 2-D numerical code to simulate both seismic and aseismic slip on non-planar faults and fault networks driven by fluid diffusion along permeable faults, in an impervious host rock. Our approach integrates a boundary element method to model fault slip governed by rate-and-state friction with a finite-volume method to simulate fluid diffusion along fault networks. We demonstrate the capabilities of the method with two illustrative examples: (1) Fluid injection inducing slow slip on a primary rough, rate-strengthening fault, which subsequently triggers microseismicity on nearby secondary, smaller faults, and (2) fluid injection on a single fault in a network of intersecting faults, leading to fluid diffusion and reactivation of slip throughout the network. This work highlights the importance of distinguishing between mechanical and hydrological processes in the analysis of induced seismicity, providing a powerful tool for improving our understanding of fault behaviour in response to fluid injection, in particular when a network of geometrically complex faults is involved.