Tran Ngoc Tu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tran Ngoc Tu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Nguyen Thi Hai Ha
Vietnam Maritime University
5 shared publicationsVu Minh Ngoc
Vietnam Maritime University
4 shared publications- Tat-Hien Le
Ho Chi Minh City University of Technology (HCMUT)
3 shared publications Dam Van Tung
Vietnam Maritime University
2 shared publications- Doan Minh Thien
Ho Chi Minh City University of Technology , Ho Chi Minh City , Viet Nam
2 shared publications Nguyen Manh Chien
Vietnam Maritime University , Vietnam
2 shared publications
Latest Publications
- 30 June 2026
- Published by Vietnam Maritime University in International Journal of Marine Science and Technology
- Vol. 2 (2) , 1-7
Numerical Investigation of Cavitation-induced Noise and Hydrodynamic Instability Around a Two-dimensional Hydrofoil
In this numerical study, physical characteristics of cavitating flow around a two-dimensional hydrofoil was investigated using a Large Eddy Simulation (LES) framework. To capture the phase change, the Schnerr–Sauer cavitation model was applied to the simulation. First, the numerical results were carefully validated with current experimental study to ensure the accuracy of the numerical scheme. Then, systematic analysis of cavity evolution around the hydrofoil, velocity fields and streamline behaviors, and pressure distribution on the surface of the hydrofoil under two different flow conditions (σ = 2.57 and 4.95) were carried out. The results indicated that cavitation numbers have significant effects on the formation of the cavity as well as stability of the cavity dynamics. In particular, at high cavitation number, no cavity was observed on the suction side of the hydrofoil. However, as the cavitation number decreases to 2.57, the local pressure dropped significantly, leading to cavity formation. In addition, the acoustic analysis showed that cavitation substantially increased the sound pressure level (SPL) over a wide range of the frequencies. Moreover, formation of cavities on the suction side of the hydrofoil significantly induced instability of the hydrodynamic forces. Findings from this numerical study demonstrate unexpected influences of the cavitating flow on the hydrofoil. This provides valuable insight into the design and optimization of the hydrofoil geometry to reduce cavitation effects.
- 30 June 2026
- Published by Vietnam Maritime University in International Journal of Marine Science and Technology
- Vol. 2 (2) , 1-7
Numerical Investigation of Cavitation-induced Noise and Hydrodynamic Instability Around a Two-dimensional Hydrofoil
In this numerical study, physical characteristics of cavitating flow around a two-dimensional hydrofoil was investigated using a Large Eddy Simulation (LES) framework. To capture the phase change, the Schnerr–Sauer cavitation model was applied to the simulation. First, the numerical results were carefully validated with current experimental study to ensure the accuracy of the numerical scheme. Then, systematic analysis of cavity evolution around the hydrofoil, velocity fields and streamline behaviors, and pressure distribution on the surface of the hydrofoil under two different flow conditions (σ = 2.57 and 4.95) were carried out. The results indicated that cavitation numbers have significant effects on the formation of the cavity as well as stability of the cavity dynamics. In particular, at high cavitation number, no cavity was observed on the suction side of the hydrofoil. However, as the cavitation number decreases to 2.57, the local pressure dropped significantly, leading to cavity formation. In addition, the acoustic analysis showed that cavitation substantially increased the sound pressure level (SPL) over a wide range of the frequencies. Moreover, formation of cavities on the suction side of the hydrofoil significantly induced instability of the hydrodynamic forces. Findings from this numerical study demonstrate unexpected influences of the cavitating flow on the hydrofoil. This provides valuable insight into the design and optimization of the hydrofoil geometry to reduce cavitation effects.
- Open Access
- 30 January 2026
- Published by Vietnam Maritime University in Tạp chí Khoa học Công nghệ Hàng hải
- No. 85,p. 44-50
NGHIÊN CỨU ẢNH HƯỞNG MẶT THOÁNG CHẤT LỎNG ĐẾN SỰ THAY ĐỔI CÁC THÔNG SỐ THỦY ĐỘNG CỦA CHONG CHÓNG BẰNG PHƯƠNG PHÁP CFD (NUMERICAL INVERSTIGATION OF FREE SURFACE EFFECTS ON PROPELLER PERFORMANCE USING CFD METHOD)
Bài báo nghiên cứu ảnh hưởng của mặt thoáng chất lỏng đến các thông số thủy động (TSTĐ) của chong chóng tàu thủy bằng phương pháp mô phỏng CFD. Trước tiên, mô hình tính toán được kiểm chứng tại độ sâu h/D=2,0 bằng cách so sánh với dữ liệu thực nghiệm. Tiếp đó, bài báo tiến hành đánh giá ảnh hưởng của mặt thoáng đến các TSTĐ của chong chóng ở bốn độ sâu khác nhau tại năm giá trị bước tiến tương đối. Kết quả tính toán cho thấy mặt thoáng làm giảm đáng kể lực đẩy, mô men và hiệu suất của chong chóng, đặc biệt khi chong chóng hoạt động gần mặt thoáng và ở bước tiến tương đối nhỏ. Ngoài ra, qua việc phân tích dòng chảy bao quanh chong chóng đã chỉ ra tương tác mạnh giữa hai pha khí-lỏng từ đó dẫn và sự biến động dòng chảy sau chong chóng tăng mạnh ở vùng gần mặt thoáng, dẫn đến dao động lực và mô men theo thời gian. Biên độ dao động của chúng càng lớn khi chong chóng hoạt động càng gần mặt thoáng và ngược lại.AbstractThis study investigates the influence of the free surface on the hydrodynamic characteristics of a marine propeller using CFD method. Firstly, the numerical model is verified at a submergence depth ratio of h/D=2.0 by comparing simulation results with experimental data. Then, the effects of the free surface on the propeller’s thrust, torque, and efficiency are evaluated at four different submergence depths and five advance ratios. The results indicate that, the free surface significantly reduces thrust, torque, and overall efficiency, particularly when the propeller operates near the water surface and at low advance ratios. Furthermore, flow field analysis reveals strong air-water phase interactions, which intensify flow unsteadiness in the near-surface region and result in greater fluctuations in thrust and torque in real time. The amplitude of these fluctuations is greater when the propeller operates closer to the free surface and vice versa.Keywords: Free surface, CFD, propeller, hydrodynamic characteristics.
- 30 January 2026
- Published by Vietnam Maritime University in Tạp chí Khoa học Công nghệ Hàng hải
- No. 85,p. 44-50
Open AccessNGHIÊN CỨU ẢNH HƯỞNG MẶT THOÁNG CHẤT LỎNG ĐẾN SỰ THAY ĐỔI CÁC THÔNG SỐ THỦY ĐỘNG CỦA CHONG CHÓNG BẰNG PHƯƠNG PHÁP CFD (NUMERICAL INVERSTIGATION OF FREE SURFACE EFFECTS ON PROPELLER PERFORMANCE USING CFD METHOD)
Bài báo nghiên cứu ảnh hưởng của mặt thoáng chất lỏng đến các thông số thủy động (TSTĐ) của chong chóng tàu thủy bằng phương pháp mô phỏng CFD. Trước tiên, mô hình tính toán được kiểm chứng tại độ sâu h/D=2,0 bằng cách so sánh với dữ liệu thực nghiệm. Tiếp đó, bài báo tiến hành đánh giá ảnh hưởng của mặt thoáng đến các TSTĐ của chong chóng ở bốn độ sâu khác nhau tại năm giá trị bước tiến tương đối. Kết quả tính toán cho thấy mặt thoáng làm giảm đáng kể lực đẩy, mô men và hiệu suất của chong chóng, đặc biệt khi chong chóng hoạt động gần mặt thoáng và ở bước tiến tương đối nhỏ. Ngoài ra, qua việc phân tích dòng chảy bao quanh chong chóng đã chỉ ra tương tác mạnh giữa hai pha khí-lỏng từ đó dẫn và sự biến động dòng chảy sau chong chóng tăng mạnh ở vùng gần mặt thoáng, dẫn đến dao động lực và mô men theo thời gian. Biên độ dao động của chúng càng lớn khi chong chóng hoạt động càng gần mặt thoáng và ngược lại.AbstractThis study investigates the influence of the free surface on the hydrodynamic characteristics of a marine propeller using CFD method. Firstly, the numerical model is verified at a submergence depth ratio of h/D=2.0 by comparing simulation results with experimental data. Then, the effects of the free surface on the propeller’s thrust, torque, and efficiency are evaluated at four different submergence depths and five advance ratios. The results indicate that, the free surface significantly reduces thrust, torque, and overall efficiency, particularly when the propeller operates near the water surface and at low advance ratios. Furthermore, flow field analysis reveals strong air-water phase interactions, which intensify flow unsteadiness in the near-surface region and result in greater fluctuations in thrust and torque in real time. The amplitude of these fluctuations is greater when the propeller operates closer to the free surface and vice versa.Keywords: Free surface, CFD, propeller, hydrodynamic characteristics.
- 3 August 2025
- Published by Springer Nature
- p. 215-222
Numerical Study on the Effect of Water Depth on Resistance of 4600DWT Cargo Ship
- 3 August 2025
- Published by Springer Nature
- p. 215-222
Numerical Study on the Effect of Water Depth on Resistance of 4600DWT Cargo Ship
- 3 August 2025
- Published by Springer Nature
- p. 207-213
Numerical Study on the Effect of Energy Saving Device on Ship Performance
- 3 August 2025
- Published by Springer Nature
- p. 207-213
Numerical Study on the Effect of Energy Saving Device on Ship Performance
- Open Access
- 1 June 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (2) , 17-28
Numerical Study of the Effect of River-Sea Ship Hull Form Parameters on Resistance and Their Optimisation Using the Taguchi-Grey Method
In this paper, we systematically investigate the effect of the five most important ship hull form parameters, namely the longitudinal centre of buoyancy (LCB), the half angle of entrance of the design waterline ((½))αE), and the length (CLPR), cross-section (CABT) and volume (C∇ PR) parameters for the bulbous bow on the ship resistance using a computational fluid dynamics method. The parent ship hull form investigated in this study is a 4600DWT cargo ship, which operates on Vietnam’s river-sea routes. To save time and reduce costs, only 25 test cases designed with the orthogonal array Taguchi method are simulated, and the resistance is calculated in deep and shallow water at speeds of 10.0 and 9.0 knots, respectively. The optimal combination of the five ship hull form parameters is obtained using Taguchi-grey relational analysis. The results indicate that the optimum ship hull form depends on the water depth, and that LCB is the most critical parameter in regard to resistance. Of the combinations studied here, the variant with (½)αE=42°, CLPR=0.0141, CABT=0.1600, C∇ PR=0.00173, LCB=48.654%LBP is found to be optimal.
- 1 June 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (2) , 17-28
Open AccessNumerical Study of the Effect of River-Sea Ship Hull Form Parameters on Resistance and Their Optimisation Using the Taguchi-Grey Method
In this paper, we systematically investigate the effect of the five most important ship hull form parameters, namely the longitudinal centre of buoyancy (LCB), the half angle of entrance of the design waterline ((½))αE), and the length (CLPR), cross-section (CABT) and volume (C∇ PR) parameters for the bulbous bow on the ship resistance using a computational fluid dynamics method. The parent ship hull form investigated in this study is a 4600DWT cargo ship, which operates on Vietnam’s river-sea routes. To save time and reduce costs, only 25 test cases designed with the orthogonal array Taguchi method are simulated, and the resistance is calculated in deep and shallow water at speeds of 10.0 and 9.0 knots, respectively. The optimal combination of the five ship hull form parameters is obtained using Taguchi-grey relational analysis. The results indicate that the optimum ship hull form depends on the water depth, and that LCB is the most critical parameter in regard to resistance. Of the combinations studied here, the variant with (½)αE=42°, CLPR=0.0141, CABT=0.1600, C∇ PR=0.00173, LCB=48.654%LBP is found to be optimal.
- Open Access
- 1 June 2024
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 31 (2) , 59-66
Numerical Study of the Scale Effect on Flow Around a Propeller Using the CFD Method
This paper presents an investigation of the scale effect on the flow around a propeller using the CFD method. The differences in the numerical setup and the results obtained for the characteristics of an open water propeller are described and analysed in this paper. Moreover, the paper also highlight and analyse the scale effect on differences in flow around the propeller, such as the pressure fields in the cross section, the distributions of the skin friction coefficient and limiting streamlines on the propeller blade, the vortices in the wake of the propeller, and the velocity fields. The differences in the flow around the propeller are more clearly seen when it works under heavy loading conditions, an important finding that can support designers in improving propeller performance, investigating cavitations, etc. at the full scale. The reference propeller used in this study is the benchmark propeller PPTC VP 1304.
- 1 June 2024
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 31 (2) , 59-66
Open AccessNumerical Study of the Scale Effect on Flow Around a Propeller Using the CFD Method
This paper presents an investigation of the scale effect on the flow around a propeller using the CFD method. The differences in the numerical setup and the results obtained for the characteristics of an open water propeller are described and analysed in this paper. Moreover, the paper also highlight and analyse the scale effect on differences in flow around the propeller, such as the pressure fields in the cross section, the distributions of the skin friction coefficient and limiting streamlines on the propeller blade, the vortices in the wake of the propeller, and the velocity fields. The differences in the flow around the propeller are more clearly seen when it works under heavy loading conditions, an important finding that can support designers in improving propeller performance, investigating cavitations, etc. at the full scale. The reference propeller used in this study is the benchmark propeller PPTC VP 1304.
- Open Access
- 1 December 2023
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1278 (1) , 012024
Numerical Simulation Flow Around The 4600DWT Cargo Ship in Calm Water Condition Using RANSE Method
Information about the flow field around the ship may enable the designers to improve ship hull form concerning ship hydrodynamics. The flow around the ship can be obtained through model tests in towing tank and simulations. However, the experimental method provides the most reliable data about flow around the ship, but this method is too expensive and time-consuming. Currently, the RANSE (Reynolds – averaged Navier – Stokes equation) method has been widely employed in predicting the ship resistance and flow around the ship in the ship design process due to it provides relatively accurate results, savings in time and money compared to the experimental method. Therefore, this paper deals with the numerical results of the study flow around the 4600DWT cargo ship, which operate on Vietnam’s river-sea routes in calm water condition at different ship speeds using the RANSE method. The effect of ship speed on ship resistance components, wave pattern, wave profile along the ship, distribution of dynamic pressure, and wall shear stress on the ship’s hull surface and nominal wake field are presented and analysed in the paper.
- 1 December 2023
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1278 (1) , 012024
Open AccessNumerical Simulation Flow Around The 4600DWT Cargo Ship in Calm Water Condition Using RANSE Method
Information about the flow field around the ship may enable the designers to improve ship hull form concerning ship hydrodynamics. The flow around the ship can be obtained through model tests in towing tank and simulations. However, the experimental method provides the most reliable data about flow around the ship, but this method is too expensive and time-consuming. Currently, the RANSE (Reynolds – averaged Navier – Stokes equation) method has been widely employed in predicting the ship resistance and flow around the ship in the ship design process due to it provides relatively accurate results, savings in time and money compared to the experimental method. Therefore, this paper deals with the numerical results of the study flow around the 4600DWT cargo ship, which operate on Vietnam’s river-sea routes in calm water condition at different ship speeds using the RANSE method. The effect of ship speed on ship resistance components, wave pattern, wave profile along the ship, distribution of dynamic pressure, and wall shear stress on the ship’s hull surface and nominal wake field are presented and analysed in the paper.
- Open Access
- 1 December 2023
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1278 (1) , 012023
Numerical Investigation on the Influence of Ship Hull Form Modification on Resistance of the 4600DWT Cargo Ship Using RANSE Method
Optimization of ship hull form in the ship design process aims to reduce ship resistance, which is crucial for economic efficiency and meets the International Maritime Organization (IMO) requirement for emission reduction and energy saving. This paper investigates the impact of the longitudinal centre of buoyancy (LCB) position on the resistance of a cargo ship 4600DWT using the RANSE (Reynolds – averaged Navier – Stokes equation) method. The ship hull form was modified using the Lackenby method. The obtained numerical results indicate that the LCB position significantly affects ship resistance. The physical phenomenon of the change in ship resistance is also explained through the analysis of the differences in the flow field around the ship’s hull form with modified LCB positions.
- 1 December 2023
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1278 (1) , 012023
Open AccessNumerical Investigation on the Influence of Ship Hull Form Modification on Resistance of the 4600DWT Cargo Ship Using RANSE Method
Optimization of ship hull form in the ship design process aims to reduce ship resistance, which is crucial for economic efficiency and meets the International Maritime Organization (IMO) requirement for emission reduction and energy saving. This paper investigates the impact of the longitudinal centre of buoyancy (LCB) position on the resistance of a cargo ship 4600DWT using the RANSE (Reynolds – averaged Navier – Stokes equation) method. The ship hull form was modified using the Lackenby method. The obtained numerical results indicate that the LCB position significantly affects ship resistance. The physical phenomenon of the change in ship resistance is also explained through the analysis of the differences in the flow field around the ship’s hull form with modified LCB positions.
- 27 March 2021
- Published by Springer Nature
- p. 851-859
Full-Scale Self-propulsion Computations Using Body Force Propeller Method for Series Cargo Ship 12500DWT
- 27 March 2021
- Published by Springer Nature
- p. 851-859
Full-Scale Self-propulsion Computations Using Body Force Propeller Method for Series Cargo Ship 12500DWT