Vladimir S. Stepanov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Vladimir S. Stepanov has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Konstantin Suslov
Department of Power Supply and Electrical Engineering, Irkutsk National Research Technical University, 664074 Irkutsk, Russia
6 shared publications - Zbigniew Antoni Styczynski
Otto-von-Guericke-University Magdeburg
3 shared publications - Elena Stashkevich
Irkutsk National Research Technical University, Irkutsk, Russia
2 shared publications - Nafisa Solonina
Irkutsk State Technical University, Russia
2 shared publications Nikolai Voropai
Energy Systems Institute SB, RAS Irkutsk, Russia
2 shared publicationsSergey Stepanov
2 shared publications
Latest Publications
- 16 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Energy-intensive manufacturing enterprises as active players in demand side management system
Nowadays, one of the primary problems in the energy industry is ensuring rational operating conditions of electric power systems under variable loads and with regard to cost-effectiveness and technical capabilities of power plants. Supply fluctuated load considerably increases the costs in the power systems. The price of electricity in the case by changed load is generally higher than by constant load. This price cannot be decreased without cooperation with consumers. The last decade has shown an intensive adoption of new smart tools and technologies for automation in the electricity supply systems, which make it possible to increase the speed of receiving, transferring, processing and mapping the information, and to implement new capabilities of active behavior of consumers in managing their electricity demand on the basis of market mechanisms. The paper addresses a technique for the optimization of daily load curve for the case of a specified tariff mix. The genetic algorithms are used to apply the cost benefits. The usefulness of this method is illustrated by two case studies of energy-intensive manufacturing enterprises as active consumers and players on the energy market.
- 16 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Energy-intensive manufacturing enterprises as active players in demand side management system
Nowadays, one of the primary problems in the energy industry is ensuring rational operating conditions of electric power systems under variable loads and with regard to cost-effectiveness and technical capabilities of power plants. Supply fluctuated load considerably increases the costs in the power systems. The price of electricity in the case by changed load is generally higher than by constant load. This price cannot be decreased without cooperation with consumers. The last decade has shown an intensive adoption of new smart tools and technologies for automation in the electricity supply systems, which make it possible to increase the speed of receiving, transferring, processing and mapping the information, and to implement new capabilities of active behavior of consumers in managing their electricity demand on the basis of market mechanisms. The paper addresses a technique for the optimization of daily load curve for the case of a specified tariff mix. The genetic algorithms are used to apply the cost benefits. The usefulness of this method is illustrated by two case studies of energy-intensive manufacturing enterprises as active consumers and players on the energy market.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 260-264
A principle of power quality control in the intelligent distribution networks
There are some known methods for the improvement of power quality in the distribution and main networks. However, all these methods solve the power quality problem with a delay. The authors suggest using the available infrastructure of phasor measurement units that has been already used for monitoring the power system operation as a source of primary data at different points of the network. To this end, the sensors of instantaneous current and voltage values have been installed at the nodal points of the system (generators, distribution substations, consumer substations). This method involves the use of PMU infrastructure for continuous acquisition of data on instantaneous values of electrical currents and voltages. The smart meter proposed by the authors earlier is suggested as a primary tool for the measurement of the harmonic level and direction in different cutsets of the power systems. This procedure is performed online which allows continuous adjustment of electricity supply system to the operating conditions close to the optimal ones in terms of harmonic level in the supply voltage at the considered points of connection.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 260-264
A principle of power quality control in the intelligent distribution networks
There are some known methods for the improvement of power quality in the distribution and main networks. However, all these methods solve the power quality problem with a delay. The authors suggest using the available infrastructure of phasor measurement units that has been already used for monitoring the power system operation as a source of primary data at different points of the network. To this end, the sensors of instantaneous current and voltage values have been installed at the nodal points of the system (generators, distribution substations, consumer substations). This method involves the use of PMU infrastructure for continuous acquisition of data on instantaneous values of electrical currents and voltages. The smart meter proposed by the authors earlier is suggested as a primary tool for the measurement of the harmonic level and direction in different cutsets of the power systems. This procedure is performed online which allows continuous adjustment of electricity supply system to the operating conditions close to the optimal ones in terms of harmonic level in the supply voltage at the considered points of connection.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21654816,p. 1-5
Demand response for different power supply systems
Daily electric load schedules of electric power systems (EPS) are derived from the graphs of individual consumers, who are generally unbalanced. Changing the schedules of electrical loads (power consumption) gives consumers the opportunity to significantly adjust the total electrical load schedule of the EPS by reducing the need for generation capacity and current costs for the production and transmission of electricity. The authors consider the possibilities of including electricity consumption from different electricity intensive enterprises and residential consumers in the projects for demand side management in a market environment. The example of the copper smelting plant is used to describe the procedure for determining the maximum parameters of electricity demand limitation in terms of the technical capabilities caused by the necessity for an enterprise to perform its main production functions. The economic estimation of conditions under which the consumers would be interested in participating in the load management of the electric power system is presented. This paper presents a methodology for optimizing the daily schedules of active consumers and the optimization results for the three cases of consumers.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21654816,p. 1-5
Demand response for different power supply systems
Daily electric load schedules of electric power systems (EPS) are derived from the graphs of individual consumers, who are generally unbalanced. Changing the schedules of electrical loads (power consumption) gives consumers the opportunity to significantly adjust the total electrical load schedule of the EPS by reducing the need for generation capacity and current costs for the production and transmission of electricity. The authors consider the possibilities of including electricity consumption from different electricity intensive enterprises and residential consumers in the projects for demand side management in a market environment. The example of the copper smelting plant is used to describe the procedure for determining the maximum parameters of electricity demand limitation in terms of the technical capabilities caused by the necessity for an enterprise to perform its main production functions. The economic estimation of conditions under which the consumers would be interested in participating in the load management of the electric power system is presented. This paper presents a methodology for optimizing the daily schedules of active consumers and the optimization results for the three cases of consumers.
- 1 January 2014
- Published by INSTICC
- p. 63-67
PMU for Detection of Short-circuit Point in the Transmission Line
- 1 January 2014
- Published by INSTICC
- p. 63-67
PMU for Detection of Short-circuit Point in the Transmission Line
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Electricity demand and management capabilities of an industrial enterprise and technical and economic preconditions for their implementation
The paper considers the possibilities of involving electricity intensive enterprises in the projects for demand side management in a market environment. The example of the copper smelting plant is used to describe the procedure for determining the maximum parameters of electricity demand limitation in terms of technological capabilities caused by the necessity for an enterprise to perform its main production functions. The economic estimation of conditions under which the enterprise can be interested in the load management of the electric power system is presented.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Electricity demand and management capabilities of an industrial enterprise and technical and economic preconditions for their implementation
The paper considers the possibilities of involving electricity intensive enterprises in the projects for demand side management in a market environment. The example of the copper smelting plant is used to describe the procedure for determining the maximum parameters of electricity demand limitation in terms of technological capabilities caused by the necessity for an enterprise to perform its main production functions. The economic estimation of conditions under which the enterprise can be interested in the load management of the electric power system is presented.
- 1 October 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21654816,p. 1-4
The market approach of demand management in the power system
The control of energy consumption pattern is one of the most important methods to improve the efficiency of electricity demand. This paper deals with technical and economic optimization of operation in a complex electric power system - consumer under equal rights of both partners. Under market conditions solving the problem is only possible through the flexible use of economic boundaries. The aim of this paper is to show that at the present stage of the electricity market organization (e.g. in Russia) one of the most effective ways to optimize demand for electricity is wisely-constructed schedule of peak load distribution within a critical time in a power system with the consumer-regulator. This consumer will take part on the marked if his rescheduling will compensated with a special tariff by the power system operator. In the paper the modeling of the optimization process and some example calculations have been shown.
- 1 October 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21654816,p. 1-4
The market approach of demand management in the power system
The control of energy consumption pattern is one of the most important methods to improve the efficiency of electricity demand. This paper deals with technical and economic optimization of operation in a complex electric power system - consumer under equal rights of both partners. Under market conditions solving the problem is only possible through the flexible use of economic boundaries. The aim of this paper is to show that at the present stage of the electricity market organization (e.g. in Russia) one of the most effective ways to optimize demand for electricity is wisely-constructed schedule of peak load distribution within a critical time in a power system with the consumer-regulator. This consumer will take part on the marked if his rescheduling will compensated with a special tariff by the power system operator. In the paper the modeling of the optimization process and some example calculations have been shown.
- 24 August 2007
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 29 (13) , 1215-1220
Estimation of the Energy Efficiency of Oil Production and Pipe-line Transportation Systems
The method of energy use effectiveness of oil production and pipe-line transport systems by the efficiency test is suggested. The concept of idealized analogs of the processes for calculation of the minimum necessary energy/work consumption on their realization is used. The idealized analogs, under the assumptions made for their forming, are described. Determining the theoretic energy consumption is based on methods of hydraulic and thermodynamic analysis.
- 24 August 2007
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 29 (13) , 1215-1220
Estimation of the Energy Efficiency of Oil Production and Pipe-line Transportation Systems
The method of energy use effectiveness of oil production and pipe-line transport systems by the efficiency test is suggested. The concept of idealized analogs of the processes for calculation of the minimum necessary energy/work consumption on their realization is used. The idealized analogs, under the assumptions made for their forming, are described. Determining the theoretic energy consumption is based on methods of hydraulic and thermodynamic analysis.
- 1 June 2004
- Published by Taylor & Francis in Energy Sources
- Vol. 26 (7) , 647-660
Energy Demand Forecasting by Thermodynamic Analysis of Energy Consumed Processes
The article presents a method of energy demand forecasting by using thermodynamic analysis of processes in the energy consumption sphere. Energy demand of a branch is determined on the base of modeling the energy consumption of an individual process by its material and energy balances. It makes it possible to take into account improvement of existing processes, change of technologies and introduction of energy conservation measures when the specific energy consumption for the product is determined for short- and mid-term forecasting. It is suggested to apply forecasting of energy and exergy efficiencies of technologies by long-term forecasting of energy demand. The complete energy balance method and concepts of the chemical energy and exergy of feedstock, ideal and idealized analogues of real processes, minimum necessary and limiting energy and work consumption are used.
- 1 June 2004
- Published by Taylor & Francis in Energy Sources
- Vol. 26 (7) , 647-660
Energy Demand Forecasting by Thermodynamic Analysis of Energy Consumed Processes
The article presents a method of energy demand forecasting by using thermodynamic analysis of processes in the energy consumption sphere. Energy demand of a branch is determined on the base of modeling the energy consumption of an individual process by its material and energy balances. It makes it possible to take into account improvement of existing processes, change of technologies and introduction of energy conservation measures when the specific energy consumption for the product is determined for short- and mid-term forecasting. It is suggested to apply forecasting of energy and exergy efficiencies of technologies by long-term forecasting of energy demand. The complete energy balance method and concepts of the chemical energy and exergy of feedstock, ideal and idealized analogues of real processes, minimum necessary and limiting energy and work consumption are used.
- 1 April 2000
- Published by Elsevier in Energy and Buildings
- Vol. 31 (3) , 189-193
Indices for estimation of energy conservation in space heating
- 1 April 2000
- Published by Elsevier in Energy and Buildings
- Vol. 31 (3) , 189-193
Indices for estimation of energy conservation in space heating