Diego Guénot
Research Subjects
Diego Guénot has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Jonas Bjorklund Svensson
Deutsches Elektronen-Synchrotron DESY
3 shared publications - Olle Lundh
Lund University
3 shared publications Anders Persson
Department of Physics, Lund University, Lund, Sweden
2 shared publications- Edouard Berrocal
Lund University
2 shared publications Kristoffer Svendsen
Department of Physics, Lund University, Lund, Sweden
2 shared publications- Kristoffer Svendsen
Lund University
2 shared publications
Latest Publications
- 21 March 2024
- Published by Optica Publishing Group in Optics Continuum
- Vol. 3 (4) , 565-573
Compact snapshot hyperspectral camera for ophthalmology
- 21 March 2024
- Published by Optica Publishing Group in Optics Continuum
- Vol. 3 (4) , 565-573
Compact snapshot hyperspectral camera for ophthalmology
- Open Access
- 12 October 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (10) , 101301
Mechanisms to control laser-plasma coupling in laser wakefield electron acceleration
Experimental results, supported by precise modeling, demonstrate optimization of a plasma-based injector with intermediate laser pulse energy (), corresponding to a normalized vector potential , using ionization injection in a tailored plasma density profile. An increase in electron bunch quality and energy is achieved experimentally with the extension of the density downramp at the plasma exit. Optimization of the focal position of the laser pulse in the tailored plasma density profile is shown to efficiently reduce electron bunch angular deviation, leading to a better alignment of the electron bunch with the laser axis. Single peak electron spectra are produced in a previously unexplored regime by combining an early focal position and adaptive optic control of the laser wavefront by optimizing the symmetry of the prefocal laser energy distribution. Experimental results have been validated through particle-in-cell simulations using realistic laser energy, phase distribution, and temporal envelope, allowing for accurate predictions of difficult to model parameters, such as total charge and spatial properties of the electron bunches, opening the way for more accurate modeling for the design of plasma-based accelerators.- 12 October 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (10) , 101301
Open AccessMechanisms to control laser-plasma coupling in laser wakefield electron acceleration
Experimental results, supported by precise modeling, demonstrate optimization of a plasma-based injector with intermediate laser pulse energy (), corresponding to a normalized vector potential , using ionization injection in a tailored plasma density profile. An increase in electron bunch quality and energy is achieved experimentally with the extension of the density downramp at the plasma exit. Optimization of the focal position of the laser pulse in the tailored plasma density profile is shown to efficiently reduce electron bunch angular deviation, leading to a better alignment of the electron bunch with the laser axis. Single peak electron spectra are produced in a previously unexplored regime by combining an early focal position and adaptive optic control of the laser wavefront by optimizing the symmetry of the prefocal laser energy distribution. Experimental results have been validated through particle-in-cell simulations using realistic laser energy, phase distribution, and temporal envelope, allowing for accurate predictions of difficult to model parameters, such as total charge and spatial properties of the electron bunches, opening the way for more accurate modeling for the design of plasma-based accelerators. - Open Access
- 1 August 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (8) , 083305
Effects of liquid properties on atomization and spray characteristics studied by planar two-photon fluorescence
In this work, planar two-photon laser-induced fluorescence (2p-LIF) is applied for the first time to analyze the fluid dependent spray structure and atomization behavior of water and ethanol in a quantitative way. A commercial six-hole DISI (Direct-Injection Spark-Ignition) injector was studied at different injection pressures, operated with liquids containing the LIF dye fluorescein. Specifically for DISI-injectors, the fluid-dependent atomization is very complex and not fully understood due to the cavitating, turbulent nozzle flow that dominates the spray formation. Optical access and analysis of the near-nozzle spray are often challenging due to multiple light scattering in dense regions which is reduced by 2p-LIF measurements using a femtosecond laser. This allows high-contrast spray imaging close to the nozzle, resulting in an improved identification of single liquid structures of the spray. Thus, a higher accuracy of sizing is possible. Compared to water, the ethanol spray shape shows increased cone angles in the nozzle near-field of about 6%, which cannot be explained by classical atomization theory based on aerodynamic breakup. The larger cone angle of ethanol was attributed to its larger viscosity, which could decelerate the flow at the wall of the injection hole, affecting the velocity profile of the emerging jet. The atomization shows a main jet breakup distance of 7–10 mm in which the structure sizes decreased drastically, specifically for water. For the size of the liquid structures in the near-nozzle region, which show dimensions of about 80–130 μm, ethanol exhibited about 2% smaller Feret's diameters than water for the tested time steps at 20 MPa. This effect is even more distinct for other injection pressures and positions at a further distance to the injector. For all investigated conditions and measurement positions downstream of the nozzle, ethanol showed on average about 24% smaller structures compared to the water spray. Although this trend is in accordance with the classical atomization theory based on the aerodynamic breakup mechanism, other effects, such as cavitation and nozzle-flow induced breakup, contribute to this behavior.
- 1 August 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (8) , 083305
Open AccessEffects of liquid properties on atomization and spray characteristics studied by planar two-photon fluorescence
In this work, planar two-photon laser-induced fluorescence (2p-LIF) is applied for the first time to analyze the fluid dependent spray structure and atomization behavior of water and ethanol in a quantitative way. A commercial six-hole DISI (Direct-Injection Spark-Ignition) injector was studied at different injection pressures, operated with liquids containing the LIF dye fluorescein. Specifically for DISI-injectors, the fluid-dependent atomization is very complex and not fully understood due to the cavitating, turbulent nozzle flow that dominates the spray formation. Optical access and analysis of the near-nozzle spray are often challenging due to multiple light scattering in dense regions which is reduced by 2p-LIF measurements using a femtosecond laser. This allows high-contrast spray imaging close to the nozzle, resulting in an improved identification of single liquid structures of the spray. Thus, a higher accuracy of sizing is possible. Compared to water, the ethanol spray shape shows increased cone angles in the nozzle near-field of about 6%, which cannot be explained by classical atomization theory based on aerodynamic breakup. The larger cone angle of ethanol was attributed to its larger viscosity, which could decelerate the flow at the wall of the injection hole, affecting the velocity profile of the emerging jet. The atomization shows a main jet breakup distance of 7–10 mm in which the structure sizes decreased drastically, specifically for water. For the size of the liquid structures in the near-nozzle region, which show dimensions of about 80–130 μm, ethanol exhibited about 2% smaller Feret's diameters than water for the tested time steps at 20 MPa. This effect is even more distinct for other injection pressures and positions at a further distance to the injector. For all investigated conditions and measurement positions downstream of the nozzle, ethanol showed on average about 24% smaller structures compared to the water spray. Although this trend is in accordance with the classical atomization theory based on the aerodynamic breakup mechanism, other effects, such as cavitation and nozzle-flow induced breakup, contribute to this behavior.
- 15 February 2021
- Published by Springer Nature in Nature Physics
- Vol. 17 (5) , 639-645
Low-divergence femtosecond X-ray pulses from a passive plasma lens
- 15 February 2021
- Published by Springer Nature in Nature Physics
- Vol. 17 (5) , 639-645
Low-divergence femtosecond X-ray pulses from a passive plasma lens
- Open Access
- 31 December 2020
- Published by American Physical Society (APS) in Physical Review X
- Vol. 10 (4) , 041064
Interaction of Ultraintense Radially-Polarized Laser Pulses with Plasma Mirrors
We present experimental results of vacuum laser acceleration (VLA) of electrons using radially polarized laser pulses interacting with a plasma mirror. Tightly focused, radially polarized laser pulses have been proposed for electron acceleration because of their strong longitudinal electric field, making them ideal for VLA. However, experimental results have been limited until now because injecting electrons into the laser field has remained a considerable challenge. Here, we demonstrate experimentally that using a plasma mirror as an injector solves this problem and permits us to inject electrons at the ideal phase of the laser, resulting in the acceleration of electrons along the laser propagation direction while reducing the electron beam divergence compared to the linear polarization case. We obtain electron bunches with few-MeV energies and a 200-pC charge, thus demonstrating, for the first time, electron acceleration to relativistic energies using a radially polarized laser. High-harmonic generation from the plasma surface is also measured, and it provides additional insight into the injection of electrons into the laser field upon its reflection on the plasma mirror. Detailed comparisons between experimental results and full 3D simulations unravel the complex physics of electron injection and acceleration in this new regime: We find that electrons are injected into the radially polarized pulse in the form of two spatially separated bunches emitted from the p-polarized regions of the focus. Finally, we leverage on the insight brought by this study to propose and validate a more optimal experimental configuration that can lead to extremely peaked electron angular distributions and higher energy beams.
- 31 December 2020
- Published by American Physical Society (APS) in Physical Review X
- Vol. 10 (4) , 041064
Open AccessInteraction of Ultraintense Radially-Polarized Laser Pulses with Plasma Mirrors
We present experimental results of vacuum laser acceleration (VLA) of electrons using radially polarized laser pulses interacting with a plasma mirror. Tightly focused, radially polarized laser pulses have been proposed for electron acceleration because of their strong longitudinal electric field, making them ideal for VLA. However, experimental results have been limited until now because injecting electrons into the laser field has remained a considerable challenge. Here, we demonstrate experimentally that using a plasma mirror as an injector solves this problem and permits us to inject electrons at the ideal phase of the laser, resulting in the acceleration of electrons along the laser propagation direction while reducing the electron beam divergence compared to the linear polarization case. We obtain electron bunches with few-MeV energies and a 200-pC charge, thus demonstrating, for the first time, electron acceleration to relativistic energies using a radially polarized laser. High-harmonic generation from the plasma surface is also measured, and it provides additional insight into the injection of electrons into the laser field upon its reflection on the plasma mirror. Detailed comparisons between experimental results and full 3D simulations unravel the complex physics of electron injection and acceleration in this new regime: We find that electrons are injected into the radially polarized pulse in the form of two spatially separated bunches emitted from the p-polarized regions of the focus. Finally, we leverage on the insight brought by this study to propose and validate a more optimal experimental configuration that can lead to extremely peaked electron angular distributions and higher energy beams.
- 29 January 2020
- Published by Optica Publishing Group in Optica
- Vol. 7 (2) , 131-134
Simultaneous laser-driven x-ray and two-photon fluorescence imaging of atomizing sprays
In this Letter, we report for the first time, to the best of our knowledge, the possibility of visualizing an atomizing spray by simultaneously recording x-ray absorption and two-photon laser-induced fluorescence imaging. This unique illumination/detection scheme is made possible due to the use of soft x rays emitted from a laser-driven x-ray source. An 800 mJ laser pulse of 38 fs duration is used to generate an x-ray beam with up to 4 × 10 8 photons ranging from 1 to 10 keV, allowing projection radiography of water jets generated by an automotive port fuel injector. In addition, a fraction of the laser pulse ( ∼ 10 m J ) is employed to form a light sheet and to induce two-photon fluorescence in a dye added to the water. The resulting high-contrast fluorescence images provide fine details of the spray structure, with reduced blur from multiple light scattering, while the integrated liquid mass is extracted from the x-ray radiography. In this proof of principle, we show that the combination of these two highly complementary techniques, in both the visible and soft x-ray regimes, is very promising for future characterization of challenging spray, as well as for further understanding of the physics of liquid atomization.
- 29 January 2020
- Published by Optica Publishing Group in Optica
- Vol. 7 (2) , 131-134
Simultaneous laser-driven x-ray and two-photon fluorescence imaging of atomizing sprays
In this Letter, we report for the first time, to the best of our knowledge, the possibility of visualizing an atomizing spray by simultaneously recording x-ray absorption and two-photon laser-induced fluorescence imaging. This unique illumination/detection scheme is made possible due to the use of soft x rays emitted from a laser-driven x-ray source. An 800 mJ laser pulse of 38 fs duration is used to generate an x-ray beam with up to 4 × 10 8 photons ranging from 1 to 10 keV, allowing projection radiography of water jets generated by an automotive port fuel injector. In addition, a fraction of the laser pulse ( ∼ 10 m J ) is employed to form a light sheet and to induce two-photon fluorescence in a dye added to the water. The resulting high-contrast fluorescence images provide fine details of the spray structure, with reduced blur from multiple light scattering, while the integrated liquid mass is extracted from the x-ray radiography. In this proof of principle, we show that the combination of these two highly complementary techniques, in both the visible and soft x-ray regimes, is very promising for future characterization of challenging spray, as well as for further understanding of the physics of liquid atomization.