OVO. E. Vasylieva

O. E. Vasylieva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


O. E. Vasylieva has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ІМІТАЦІЙНА МОДЕЛЬ ПРОЦЕСУ ВИЗНАЧЕННЯ ЧАСОВИХ ПАРАМЕТРІВ ПОЖЕЖНОГО СПОВІЩУВАЧА

    by O. E. Vasylieva, Ya. Ya. Kozak, O. M. Koval

    Постановка проблеми. Одним із радикальних шляхів, що забезпечують зниження втрат від пожеж, є ідентифікація небезпечних чинників пожежі на початковій стадії. Найефективніше це можна здійснити лише за допомогою автоматичних систем виявлення пожеж. Ефективність таких систем визначається передусім досконалістю технічних характеристик датчиків первинної інформації – пожежних сповіщувачів, а також ефективністю системи їх експлуатації. Одним із різновидів пожежних сповіщувачів є теплові пожежні сповіщувачі, які найбільш поширені. Експлуатація теплових пожежних сповіщувачів передбачає визначення їхніх основних технічних характеристик, що здійснюється при їх випробуваннях. Але якщо така часова характеристика як час спрацьовування пожежних сповіщувачів визначається лише при їх стаціонарних випробуваннях, то інша часова характеристика – постійна часу, не визначається ні при стаціонарних, ні при об’єктових випробуваннях теплових пожежних сповіщувачів. У зв’язку із цим актуальним завданням є створення методів визначення часових характеристик (параметрів) теплових пожежних сповіщувачів – часу спрацьовування і постійної часу, які орієнтовані на їх реалізацію при об’єктових випробуваннях. Мета роботи. Розробити імітаційні моделі із використанням пакету Simulink з метою визначення часового параметра – постійної часу пожежних сповіщувачів із терморезистивним чутливим елементом. Методи дослідження. Під час проведення наукових досліджень розроблено імітаційні моделі із використанням пакета Simulink для процесу визначення часового параметра – постійної часу пожежних сповіщувачів із терморезистивним чутливим елементом. Основні результати дослідження. Здійснено дистанційне моделювання, метою якого було визначення оптимальної тривалості одиночних імпульсів електричного струму, за допомогою яких формується тепловий вплив на терморезистивний чутливий елемент пожежних сповіщувачів. Висновки. В імітаційних моделях, розглянутих у статті, реалізовано формування теплового впливу внаслідок протікання через нього імпульсів електричного струму у формі чверті косинусоїди та прямокутного трикутника із амплітудою, що зменшується в часі. Показано, що розроблений метод дає можливість визначати кількісні оцінки часових параметрів пожежних сповіщувачів із терморезистивним чутливим елементом в автоматичному режимі і безпосередньо на об’єкті, що охороняється.

  • Open Access

    АНАЛІЗ СТАНУ ПРОТИПОЖЕЖНОГО ЗАХИСТУ ЕЛЕКТРОМОБІЛІВ

    by A. F. Gavryliuk, O. E. Vasylieva

    Постановка проблеми. Ряд проблематик, серед яких глобальне потепління та колосальне забруднення атмосферного повітря відпрацьованими газами двигунів внутрішнього згоряння, створило підґрунтя до пошуку та розробки екологічно «чистіших» транспортних засобів. Такі процеси пришвидшила і зухвало розв’язана війна росії проти України, оскільки агресор володіє колосальними запасами нафтопродуктів, від яких залежало багато держав світу.Наведені передумови створили імпульс для бурхливого розвитку ринку електромобілів. Більше того, ряд держав серед яких Швеція, Німеччина, Китай, Франція, реалізовують привабливі урядові програми, тим самим, ще більше стимулюючи своїх громадян купляти електромобілі. Таким чином, частка продажів електромобілів у 2021 році перейшла відмітку 10% від загальної кількості. Станом на кінець 2022 року, автопарк електромобілів становить майже 27 млн і продовжує зростати. Разом із зростанням їх кількості, зростають і пожежі таких транспортних засобів в абсолютному та відносному значеннях (останнє зумовлене старінням, тобто збільшенням середнього віку парку електромобілів). Пожежі електромобілів мають інший характер розвитку, що створює нові виклики для пожежно-рятувальних служб, інженерів-будівельників та власників таких транспортних засобів.Мета дослідження полягає у аналізі чинних нормативно-правових актів забезпечення протипожежного захисту електромобілів під час виготовлення та експлуатації. Це створить підґрунтя для виявлення шляхів підвищення їх протипожежного захисту.Опис матеріалу. Хоча пожежі електромобілів трапляються рідше, ніж пожежі автомобілів з двигунами внутрішнього згоряння, проте вони мають небезпечніший характер розвитку. Нерідко є важко ідентифікувати причину, яка ініціювала займання транспортного засобу. Такі пожежі можуть відбутись на закритих чи відкритих паркінгах, приватних гаражах, під час заряджання, руху, чи після дорожньо-транспортної пригоди. Акумуляторні батареї повинні пройти низку тестів та випробування перш ніж будуть використовуватись на електромобілі. Такі випробування регламентуються міжнародними стандартами, які розробляються відповідними організаціями і ґрунтуються на наукових дослідженнях. Дослідження акумуляторних батарей проводяться з метою виявлення слабких чи небезпечних місць, щоб запобігти виникненню несправності, займання, пожежі чи навіть вибуху. За об’єктом випробування тести на випробування можна поділити на 4 рівні: випробування на одному елементі; випробування на комірці; випробування на акумуляторній батареї; випробування на електромобілі в цілому. Останні зміни до норм обладнання колісних транспортних засобів, до яких відносяться і електромобілі, первинними засобами пожежогасіння було внесено ще у 2009 році, що вкрай не відповідає умовам сьогодення. Ці норми не враховують не лише класифікацію транспортних засобів, але й не відповідають сучасному стану автопарку України, який суттєво змінився за останні п'ятнадцять років. Зміни стосуються збільшення кількості електромобілів та гібридних транспортних засобів, які несуть інший характер розвитку пожежі. Тому дослідження, розроблення та прийняття на законодавчому рівні сучасних норм забезпечення протипожежними засобами колісних транспортних засобів, в тому числі для...


  • ANALYSIS OF THE DETERMINING METHODS OF THE THERMAL FIRE DETECTORS TIME PARAMETERS

    by O. Vasilyeva, Y. Kozak

    The article is devoted to substantiating the pulse method of time parameters determining - the thermal fire detectors' operation time and constant time with a thermal resist sensitive element. Significant research is that the time parameters of thermal fire detectors include the operation time and constant time that are interconnected. It is shown that the contribution of constant time to the operation time can be up to 20% at a speed of change in ambient temperature 0.50C per C-1. It is also found that their testing is used to determine the time parameters of thermal fire detectors, which are divided into stationary or autonomous and operational or object. The article specifies that the disadvantage of inpatient tests with the help of heat chambers is the asymmetry of the airflow distribution and temperature, and the lack of such tests employing standard combustion cells is that the thermal impact parameters on the fire detector sensitive element are not normalized. The research results have found that the amount of the fire detectors' constant time is not determined, and only control of the fire detectors' operation time is carried out according to the admission criteria. During the object tests, in most cases, the thermal impact on a fire detector's sensitive element with the help of small heat chambers is realized, the purpose of such tests is to check the fire detectors' performance without obtaining estimates of their operation time and constant time. It is worth noting that the thermal impact on the fire detector's sensitive element can be carried out with the help of both external and internal sources of heat. The second option is characteristic of fire detectors with a thermal resist sensitive element and is based on the use of the Joule-Lenz effect (heating of a conductor or semiconductor is directly proportional to its resistance, the duration of the current and the square of the current). In this case, new opportunities are opened to improve the efficiency of the fire detectors operation of this type.

  • Open Access

    EXPERIMENTAL STUDIES OF THE FIRE DETECTOR’S TIME PARAMETERS DETERMINING PROCESS USING THE PULSE METHOD

    by LvivState University of Life Safety, Olena Vasylieva, Олександр Коваль, Llc «Vsesvit Comfort Company», Yaroslav Kozak, Ярослав Козак

    One of the most relevant methods to reduce losses from fires is to identify fire hazards. The most effective in this case is the early detection of fires using automatic fire protection systems and their timely localization. The performance of such systems is determined by the proper technical characteristics of fire detectors, which are the first link in any automatic fire protection system and its proper operation.Ensuring the proper functioning of automatic fire protection systems, in particular primary information sensors -fire detectors -is an important component, as their work is aimed at detecting a fire at its initial stage. After all, early detection of fire hazards minimizes the risks to human life and health and reduces possible damage.Among the types of fire detectors, thermal fire detectors are one of the most common. This isdue to their simple design, low maintenance, and low cost.Thermal fire detectors are effective in cases where the initial stage of the fire is expected to be significant with intense heat generation, where the smoke spread is difficult, and where the useof other types of detectors may lead to false alarms.The performance of such systems is determined by the fire detectors’ main parameters perfection, which include the response time and time constant.The main technical characteristics of thermal fire detectors are: rated operating temperature, operating time, and time constant. The time parameters of thermal fire detectors are interrelated. The time constant of a fire detector to its response time can be up to 20% at the rate of the ambient temperature change 0,5С0с-1.

  • Providing the environmental safety by increasing the efficiency of firefighting in unsheltered timber warehouses

    by E. M. Hulida, I. V. Pasnak, O. E. Vasylieva, I. O. Movchan

    Purpose. To develop a method for reducing the impact of fires in unsheltered timber warehouses on the environmental safety by reducing the duration of free burning of timber, the speed of fire front spread, emissions of combustion products and the duration of the firefighting. Methodology. During the experimental research, the method of fractional factor experiment was used. Theoretical research was performed using optimization mathematical models. The Monte Carlo method is used to solve optimization problems. To implement this method, block diagrams of algorithms was developed, based on written corresponded computer programs. Findings. The method was developed for reducing the impact of fires in unsheltered timber warehouses on the environmental safety by reducing the duration of free development of the fire, the speed of fire front spread, the concentration of combustion products and the duration of the fire. Fire prevention measures to reduce the duration of fire and to reduce emissions of combustion products due to fires in unsheltered timber warehouses was implemented by using an automated system to determine the fire extinguishing means and forces by setting an optimization problem, applying the Monte Carlo method and developing software to solve it. Originality. The scientific novelty is the justification of ways to reduce the duration of the free development of fire and to reduce the amount of toxic emissions using optimization mathematical models. Practical value. It is possible to use the obtained results in the practical activities of fire and rescue units of the SES of Ukraine and provide environmental safety in case of fire in unsheltered timber warehouse due to the practical implementation of administrative, legal and economic methods.