Ya. Kozak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ya. Kozak has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- O. E. Vasylieva
Львівський державний університет безпеки життєдіяльност
3 shared publications - O. M. Koval
ТзОВ Компанія“ВСЕСВІТ КОМФОРТУ
2 shared publications Llc «Vsesvit Comfort Company»
1 shared publicationLvivState University of Life Safety
1 shared publication- Oleksii Basmanov
National University of Civil Protection of Ukraine
1 shared publication - Yuriy Abramov
National University of Civil Defense of Ukraine
1 shared publication
Latest Publications
- Open Access
- 19 June 2023
- Published by Lviv State University of Life Safety in Fire Safety
- Vol. 42, 16-22
ІМІТАЦІЙНА МОДЕЛЬ ПРОЦЕСУ ВИЗНАЧЕННЯ ЧАСОВИХ ПАРАМЕТРІВ ПОЖЕЖНОГО СПОВІЩУВАЧА
Постановка проблеми. Одним із радикальних шляхів, що забезпечують зниження втрат від пожеж, є ідентифікація небезпечних чинників пожежі на початковій стадії. Найефективніше це можна здійснити лише за допомогою автоматичних систем виявлення пожеж. Ефективність таких систем визначається передусім досконалістю технічних характеристик датчиків первинної інформації – пожежних сповіщувачів, а також ефективністю системи їх експлуатації. Одним із різновидів пожежних сповіщувачів є теплові пожежні сповіщувачі, які найбільш поширені. Експлуатація теплових пожежних сповіщувачів передбачає визначення їхніх основних технічних характеристик, що здійснюється при їх випробуваннях. Але якщо така часова характеристика як час спрацьовування пожежних сповіщувачів визначається лише при їх стаціонарних випробуваннях, то інша часова характеристика – постійна часу, не визначається ні при стаціонарних, ні при об’єктових випробуваннях теплових пожежних сповіщувачів. У зв’язку із цим актуальним завданням є створення методів визначення часових характеристик (параметрів) теплових пожежних сповіщувачів – часу спрацьовування і постійної часу, які орієнтовані на їх реалізацію при об’єктових випробуваннях. Мета роботи. Розробити імітаційні моделі із використанням пакету Simulink з метою визначення часового параметра – постійної часу пожежних сповіщувачів із терморезистивним чутливим елементом. Методи дослідження. Під час проведення наукових досліджень розроблено імітаційні моделі із використанням пакета Simulink для процесу визначення часового параметра – постійної часу пожежних сповіщувачів із терморезистивним чутливим елементом. Основні результати дослідження. Здійснено дистанційне моделювання, метою якого було визначення оптимальної тривалості одиночних імпульсів електричного струму, за допомогою яких формується тепловий вплив на терморезистивний чутливий елемент пожежних сповіщувачів. Висновки. В імітаційних моделях, розглянутих у статті, реалізовано формування теплового впливу внаслідок протікання через нього імпульсів електричного струму у формі чверті косинусоїди та прямокутного трикутника із амплітудою, що зменшується в часі. Показано, що розроблений метод дає можливість визначати кількісні оцінки часових параметрів пожежних сповіщувачів із терморезистивним чутливим елементом в автоматичному режимі і безпосередньо на об’єкті, що охороняється.
- 19 June 2023
- Published by Lviv State University of Life Safety in Fire Safety
- Vol. 42, 16-22
Open AccessІМІТАЦІЙНА МОДЕЛЬ ПРОЦЕСУ ВИЗНАЧЕННЯ ЧАСОВИХ ПАРАМЕТРІВ ПОЖЕЖНОГО СПОВІЩУВАЧА
Постановка проблеми. Одним із радикальних шляхів, що забезпечують зниження втрат від пожеж, є ідентифікація небезпечних чинників пожежі на початковій стадії. Найефективніше це можна здійснити лише за допомогою автоматичних систем виявлення пожеж. Ефективність таких систем визначається передусім досконалістю технічних характеристик датчиків первинної інформації – пожежних сповіщувачів, а також ефективністю системи їх експлуатації. Одним із різновидів пожежних сповіщувачів є теплові пожежні сповіщувачі, які найбільш поширені. Експлуатація теплових пожежних сповіщувачів передбачає визначення їхніх основних технічних характеристик, що здійснюється при їх випробуваннях. Але якщо така часова характеристика як час спрацьовування пожежних сповіщувачів визначається лише при їх стаціонарних випробуваннях, то інша часова характеристика – постійна часу, не визначається ні при стаціонарних, ні при об’єктових випробуваннях теплових пожежних сповіщувачів. У зв’язку із цим актуальним завданням є створення методів визначення часових характеристик (параметрів) теплових пожежних сповіщувачів – часу спрацьовування і постійної часу, які орієнтовані на їх реалізацію при об’єктових випробуваннях. Мета роботи. Розробити імітаційні моделі із використанням пакету Simulink з метою визначення часового параметра – постійної часу пожежних сповіщувачів із терморезистивним чутливим елементом. Методи дослідження. Під час проведення наукових досліджень розроблено імітаційні моделі із використанням пакета Simulink для процесу визначення часового параметра – постійної часу пожежних сповіщувачів із терморезистивним чутливим елементом. Основні результати дослідження. Здійснено дистанційне моделювання, метою якого було визначення оптимальної тривалості одиночних імпульсів електричного струму, за допомогою яких формується тепловий вплив на терморезистивний чутливий елемент пожежних сповіщувачів. Висновки. В імітаційних моделях, розглянутих у статті, реалізовано формування теплового впливу внаслідок протікання через нього імпульсів електричного струму у формі чверті косинусоїди та прямокутного трикутника із амплітудою, що зменшується в часі. Показано, що розроблений метод дає можливість визначати кількісні оцінки часових параметрів пожежних сповіщувачів із терморезистивним чутливим елементом в автоматичному режимі і безпосередньо на об’єкті, що охороняється.
- 3 April 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (175) , 136-144
ANALYSIS OF THE DETERMINING METHODS OF THE THERMAL FIRE DETECTORS TIME PARAMETERS
The article is devoted to substantiating the pulse method of time parameters determining - the thermal fire detectors' operation time and constant time with a thermal resist sensitive element. Significant research is that the time parameters of thermal fire detectors include the operation time and constant time that are interconnected. It is shown that the contribution of constant time to the operation time can be up to 20% at a speed of change in ambient temperature 0.50C per C-1. It is also found that their testing is used to determine the time parameters of thermal fire detectors, which are divided into stationary or autonomous and operational or object. The article specifies that the disadvantage of inpatient tests with the help of heat chambers is the asymmetry of the airflow distribution and temperature, and the lack of such tests employing standard combustion cells is that the thermal impact parameters on the fire detector sensitive element are not normalized. The research results have found that the amount of the fire detectors' constant time is not determined, and only control of the fire detectors' operation time is carried out according to the admission criteria. During the object tests, in most cases, the thermal impact on a fire detector's sensitive element with the help of small heat chambers is realized, the purpose of such tests is to check the fire detectors' performance without obtaining estimates of their operation time and constant time. It is worth noting that the thermal impact on the fire detector's sensitive element can be carried out with the help of both external and internal sources of heat. The second option is characteristic of fire detectors with a thermal resist sensitive element and is based on the use of the Joule-Lenz effect (heating of a conductor or semiconductor is directly proportional to its resistance, the duration of the current and the square of the current). In this case, new opportunities are opened to improve the efficiency of the fire detectors operation of this type.
- 3 April 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (175) , 136-144
ANALYSIS OF THE DETERMINING METHODS OF THE THERMAL FIRE DETECTORS TIME PARAMETERS
The article is devoted to substantiating the pulse method of time parameters determining - the thermal fire detectors' operation time and constant time with a thermal resist sensitive element. Significant research is that the time parameters of thermal fire detectors include the operation time and constant time that are interconnected. It is shown that the contribution of constant time to the operation time can be up to 20% at a speed of change in ambient temperature 0.50C per C-1. It is also found that their testing is used to determine the time parameters of thermal fire detectors, which are divided into stationary or autonomous and operational or object. The article specifies that the disadvantage of inpatient tests with the help of heat chambers is the asymmetry of the airflow distribution and temperature, and the lack of such tests employing standard combustion cells is that the thermal impact parameters on the fire detector sensitive element are not normalized. The research results have found that the amount of the fire detectors' constant time is not determined, and only control of the fire detectors' operation time is carried out according to the admission criteria. During the object tests, in most cases, the thermal impact on a fire detector's sensitive element with the help of small heat chambers is realized, the purpose of such tests is to check the fire detectors' performance without obtaining estimates of their operation time and constant time. It is worth noting that the thermal impact on the fire detector's sensitive element can be carried out with the help of both external and internal sources of heat. The second option is characteristic of fire detectors with a thermal resist sensitive element and is based on the use of the Joule-Lenz effect (heating of a conductor or semiconductor is directly proportional to its resistance, the duration of the current and the square of the current). In this case, new opportunities are opened to improve the efficiency of the fire detectors operation of this type.
- Open Access
- 1 January 2023
- Published by National University of Civil Protection of Ukraine in Emergency Situations: Prevention and Liquidation
- Vol. 7 (1) , 7-14
EXPERIMENTAL STUDIES OF THE FIRE DETECTOR’S TIME PARAMETERS DETERMINING PROCESS USING THE PULSE METHOD
One of the most relevant methods to reduce losses from fires is to identify fire hazards. The most effective in this case is the early detection of fires using automatic fire protection systems and their timely localization. The performance of such systems is determined by the proper technical characteristics of fire detectors, which are the first link in any automatic fire protection system and its proper operation.Ensuring the proper functioning of automatic fire protection systems, in particular primary information sensors -fire detectors -is an important component, as their work is aimed at detecting a fire at its initial stage. After all, early detection of fire hazards minimizes the risks to human life and health and reduces possible damage.Among the types of fire detectors, thermal fire detectors are one of the most common. This isdue to their simple design, low maintenance, and low cost.Thermal fire detectors are effective in cases where the initial stage of the fire is expected to be significant with intense heat generation, where the smoke spread is difficult, and where the useof other types of detectors may lead to false alarms.The performance of such systems is determined by the fire detectors’ main parameters perfection, which include the response time and time constant.The main technical characteristics of thermal fire detectors are: rated operating temperature, operating time, and time constant. The time parameters of thermal fire detectors are interrelated. The time constant of a fire detector to its response time can be up to 20% at the rate of the ambient temperature change 0,5С0с-1.
- 1 January 2023
- Published by National University of Civil Protection of Ukraine in Emergency Situations: Prevention and Liquidation
- Vol. 7 (1) , 7-14
Open AccessEXPERIMENTAL STUDIES OF THE FIRE DETECTOR’S TIME PARAMETERS DETERMINING PROCESS USING THE PULSE METHOD
One of the most relevant methods to reduce losses from fires is to identify fire hazards. The most effective in this case is the early detection of fires using automatic fire protection systems and their timely localization. The performance of such systems is determined by the proper technical characteristics of fire detectors, which are the first link in any automatic fire protection system and its proper operation.Ensuring the proper functioning of automatic fire protection systems, in particular primary information sensors -fire detectors -is an important component, as their work is aimed at detecting a fire at its initial stage. After all, early detection of fire hazards minimizes the risks to human life and health and reduces possible damage.Among the types of fire detectors, thermal fire detectors are one of the most common. This isdue to their simple design, low maintenance, and low cost.Thermal fire detectors are effective in cases where the initial stage of the fire is expected to be significant with intense heat generation, where the smoke spread is difficult, and where the useof other types of detectors may lead to false alarms.The performance of such systems is determined by the fire detectors’ main parameters perfection, which include the response time and time constant.The main technical characteristics of thermal fire detectors are: rated operating temperature, operating time, and time constant. The time parameters of thermal fire detectors are interrelated. The time constant of a fire detector to its response time can be up to 20% at the rate of the ambient temperature change 0,5С0с-1.
- Open Access
- 21 December 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (5 (114)) , 49-55
Substantiating the pulse method for determining the time parameter of fire detectors with a thermoresistive sensing element
This paper substantiates the pulse method for determining the time parameter for fire detectors with a thermoresistive sensing element ‒ the time constant. The method is based on using the Joule-Lenz effect, which manifests itself when an electric current pulse passes through the thermoresistive sensing element of fire detectors. Thermal processes in such a sensing element are described by a mathematical model that belongs to the class of equations of mathematical physics. The solution to the differential equation of this class was derived using the Hankel integral transformation and is represented as a series relative to the Bessel functions. The resulting solution is used to construct a mathematical model of a thermoresistive sensing element in the form of a transfer function, which takes the form of the transfer function of the inertial link. To trigger the thermoresistive sensing element of fire detectors, a single pulse of electric current in the shape of a rectangular triangle is used. The integral Laplace transformation was applied to mathematically describe the response of a thermoresistive sensing element to the thermal effect of such a test influence. To obtain information about the time parameter of fire detectors with a thermoresistive sensing element, the ratio of its output signals is used, which are measured in the a priori defined moments. A two-parametric expression was built to determine the time parameter of fire detectors; a verbal interpretation of the pulse method to determine it was provided. The implementation of this method ensures the invariance of the time parameter of fire detectors with a thermoresistive sensing element relative to the amplitude of a single pulse of an electric current, as well as relative to the parameter that is included in its transfer coefficient.
- 21 December 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (5 (114)) , 49-55
Open AccessSubstantiating the pulse method for determining the time parameter of fire detectors with a thermoresistive sensing element
This paper substantiates the pulse method for determining the time parameter for fire detectors with a thermoresistive sensing element ‒ the time constant. The method is based on using the Joule-Lenz effect, which manifests itself when an electric current pulse passes through the thermoresistive sensing element of fire detectors. Thermal processes in such a sensing element are described by a mathematical model that belongs to the class of equations of mathematical physics. The solution to the differential equation of this class was derived using the Hankel integral transformation and is represented as a series relative to the Bessel functions. The resulting solution is used to construct a mathematical model of a thermoresistive sensing element in the form of a transfer function, which takes the form of the transfer function of the inertial link. To trigger the thermoresistive sensing element of fire detectors, a single pulse of electric current in the shape of a rectangular triangle is used. The integral Laplace transformation was applied to mathematically describe the response of a thermoresistive sensing element to the thermal effect of such a test influence. To obtain information about the time parameter of fire detectors with a thermoresistive sensing element, the ratio of its output signals is used, which are measured in the a priori defined moments. A two-parametric expression was built to determine the time parameter of fire detectors; a verbal interpretation of the pulse method to determine it was provided. The implementation of this method ensures the invariance of the time parameter of fire detectors with a thermoresistive sensing element relative to the amplitude of a single pulse of an electric current, as well as relative to the parameter that is included in its transfer coefficient.
- 30 November 2021
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 6 (166) , 151-155
TEMPERATURE ERROR WHEN DETERMINING THE TIME PARAMETER OF A FIRE DETECTOR WITH A THERMORESISTIVE SENSITIVE ELEMENT
For fire detectors with a thermoresistive sensing element, a mathematical description of the reaction to the thermal action of an electric current pulse flowing through such a sensing element and having the shape of a right triangle is obtained. The mathematical description is constructed using the Laplace integral transformation and is shown to be a superposition of two Heaviside functions. The parameters of these functions are determined by the transmission coefficient and time constant of the thermoresistive sensitive element of the fire detector and the amplitude and duration of the electric current pulse. It is shown that the ratio of the output signals of the thermoresistive sensitive element of the fire detector at two a priori given moments of time can be used to determine the time parameter of the fire detector. The values of a priori set moments of time, in which the temperature of the thermoresistive sensitive element of the fire detector is determined, are selected under the condition of simplicity of technical implementation. If there is a change in ambient temperature, it leads to a temperature error as a function of the time parameter of the fire detector. For such an error, a mathematical description is obtained in the general case, as well as for the case when the thermal influence on the thermoresistive sensitive element of the fire detector is due to the flow of an electric current pulse in the form of a right triangle. It is shown that the value of the temperature error has a minimum at the values of the ratio of the output signals of the thermoresistive sensitive element of the fire detector at two a priori time points belonging to the range The value of this error does not exceed 4.9% with variations in ambient temperature, the value of which does not exceed 2.0%.
- 30 November 2021
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 6 (166) , 151-155
TEMPERATURE ERROR WHEN DETERMINING THE TIME PARAMETER OF A FIRE DETECTOR WITH A THERMORESISTIVE SENSITIVE ELEMENT
For fire detectors with a thermoresistive sensing element, a mathematical description of the reaction to the thermal action of an electric current pulse flowing through such a sensing element and having the shape of a right triangle is obtained. The mathematical description is constructed using the Laplace integral transformation and is shown to be a superposition of two Heaviside functions. The parameters of these functions are determined by the transmission coefficient and time constant of the thermoresistive sensitive element of the fire detector and the amplitude and duration of the electric current pulse. It is shown that the ratio of the output signals of the thermoresistive sensitive element of the fire detector at two a priori given moments of time can be used to determine the time parameter of the fire detector. The values of a priori set moments of time, in which the temperature of the thermoresistive sensitive element of the fire detector is determined, are selected under the condition of simplicity of technical implementation. If there is a change in ambient temperature, it leads to a temperature error as a function of the time parameter of the fire detector. For such an error, a mathematical description is obtained in the general case, as well as for the case when the thermal influence on the thermoresistive sensitive element of the fire detector is due to the flow of an electric current pulse in the form of a right triangle. It is shown that the value of the temperature error has a minimum at the values of the ratio of the output signals of the thermoresistive sensitive element of the fire detector at two a priori time points belonging to the range The value of this error does not exceed 4.9% with variations in ambient temperature, the value of which does not exceed 2.0%.