Alireza Fathi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alireza Fathi has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad Mozaffari
Systems Design Engineering Department University of Waterloo ON Canada
2 shared publications - Morteza Dardel
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran
2 shared publications - Amir Khajepour
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada
1 shared publication - Ehsan Toyserkani
Multi-Scale Additive Manufacturing Lab, Mechanical and Mechatronics Engineering Department, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L 3G1, Canada
1 shared publication Hamid Daniali
1 shared publicationHamid M. Daniali
Dept. of Mechanical Engineering, Babol University of Technology, Babol, Iran
1 shared publication
Latest Publications
- 4 December 2019
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 26 (9-10) , 680-700
Nonlinear vibration and stability analysis of double-walled piezoelectric nanoresonator with nonlinear van der Waals and electrostatic excitation
In this work, nonlinear vibration and frequency response analysis of a double-walled piezoelectric nanoresonator based on a cylindrical nanoshell is performed using the Gurtin–Murdoch surface/interface theory. The piezoelectric nanoresonator is simultaneously subjected to the visco-Pasternak medium and nonlinear van der Waals and electrostatic forces. It is found that the electrostatic and piezoelectric voltages, length to radius ratio, nanoresonator gap width, linear and nonlinear van der Waals coefficients and other parameters can effectively change the flexural rigidity of the system, which in turn affects the nonlinear frequency response. Also, increasing or decreasing of some parameters leads to increase or decrease in the resonance amplitude, resonant frequency, instability of the system, nonlinear behavior and bandwidth.
- 4 December 2019
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 26 (9-10) , 680-700
Nonlinear vibration and stability analysis of double-walled piezoelectric nanoresonator with nonlinear van der Waals and electrostatic excitation
In this work, nonlinear vibration and frequency response analysis of a double-walled piezoelectric nanoresonator based on a cylindrical nanoshell is performed using the Gurtin–Murdoch surface/interface theory. The piezoelectric nanoresonator is simultaneously subjected to the visco-Pasternak medium and nonlinear van der Waals and electrostatic forces. It is found that the electrostatic and piezoelectric voltages, length to radius ratio, nanoresonator gap width, linear and nonlinear van der Waals coefficients and other parameters can effectively change the flexural rigidity of the system, which in turn affects the nonlinear frequency response. Also, increasing or decreasing of some parameters leads to increase or decrease in the resonance amplitude, resonant frequency, instability of the system, nonlinear behavior and bandwidth.
- 27 March 2018
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 233 (3) , 977-986
Numerical study of the stand-off distance and liner thickness effect on the penetration depth efficiency of shaped charge process
The aim of this paper is to investigate the effect of geometrical parameters on the performance of jet penetration in the process of shaped charge. To this end, the finite element analysis was used to simulate the process. The simulated process was validated by experimental tests and the effect of some parameters including stand-off distance and the liner thickness on the jet penetration depth was studied. The results indicated that choosing the optimal distance between the liner and the target (stand-off distance) can significantly affect the performance of jet penetration in the target. In addition, examining the effect of liner thickness on the penetration depth efficiency revealed that by decreasing the liner thickness, the jet penetration depth on the target increases. It should be noted that ABAQUS finite element software was used in this simulation to analyze the process of shaped charge.
- 27 March 2018
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 233 (3) , 977-986
Numerical study of the stand-off distance and liner thickness effect on the penetration depth efficiency of shaped charge process
The aim of this paper is to investigate the effect of geometrical parameters on the performance of jet penetration in the process of shaped charge. To this end, the finite element analysis was used to simulate the process. The simulated process was validated by experimental tests and the effect of some parameters including stand-off distance and the liner thickness on the jet penetration depth was studied. The results indicated that choosing the optimal distance between the liner and the target (stand-off distance) can significantly affect the performance of jet penetration in the target. In addition, examining the effect of liner thickness on the penetration depth efficiency revealed that by decreasing the liner thickness, the jet penetration depth on the target increases. It should be noted that ABAQUS finite element software was used in this simulation to analyze the process of shaped charge.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 595-600
Dynamic behavior analysis of a planar four-bar linkage with three clearance joints
In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. It is noteworthy that in the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of a planar mechanism with revolute joints, in the presence of clearances is investigated. A continuous contact force model, based on the elastic Hertz theory together with a dissipative term, is used to evaluate the contact forces. And then, the dynamic characteristics of planar mechanical system with revolute joint clearance are analyzed based on the new contact model. Numerical results for four-bar linkage with three revolute clearance joints are presented and discussed.
- 1 October 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 595-600
Dynamic behavior analysis of a planar four-bar linkage with three clearance joints
In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. It is noteworthy that in the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of a planar mechanism with revolute joints, in the presence of clearances is investigated. A continuous contact force model, based on the elastic Hertz theory together with a dissipative term, is used to evaluate the contact forces. And then, the dynamic characteristics of planar mechanical system with revolute joint clearance are analyzed based on the new contact model. Numerical results for four-bar linkage with three revolute clearance joints are presented and discussed.
- 1 July 2014
- Published by IGI Global Scientific Publishing in International Journal of Applied Metaheuristic Computing
- Vol. 5 (3) , 9-22
A Fuzzy Model with Thermodynamic Based Consequents and a Niching Swarm-Based Supervisor to Capture the Uncertainties of Damavand Power System
In this investigation, a novel fuzzy mathematical program based on thermodynamic principles is implemented to capture the uncertainties of a practical power system, known as Damavand power plant. The proposed intelligent machine takes the advantages of a niching bio-inspired learning mechanism to be reconciled to the requirements of the problem at hand. The aim of the bio-inspired fuzzy based intelligent system is to yield a model capable of recognizing different operating parameters of Damavand power system under different operating conditions. To justify the privileges of using a niching metaheuristic over gradient descend methods, the authors use the data, derived through data acquisition, together with a machine learning based approach to estimate the multi-modality associated with the training of the proposed fuzzy model. Moreover, the niching bio-inspired metaheuristic, niching particle swarm optimization (NPSO), is compared to canonical PSO (CPSO), stochastic social PSO (SSPSO), unified PSO (UPSO), comprehensive learning PSO (CLPSO), PSO with constriction factor (PSOCF) and fully informed PSO (FIPSO). Through experiments and analysis of the characteristics of the problem being optimized, it is proved that NPSO is not only able to tackle the deficiencies of the learning process, but also can effectively adjust the fuzzy approach to conduct the identification process with a high degree of robustness and accuracy.
- 1 July 2014
- Published by IGI Global Scientific Publishing in International Journal of Applied Metaheuristic Computing
- Vol. 5 (3) , 9-22
A Fuzzy Model with Thermodynamic Based Consequents and a Niching Swarm-Based Supervisor to Capture the Uncertainties of Damavand Power System
In this investigation, a novel fuzzy mathematical program based on thermodynamic principles is implemented to capture the uncertainties of a practical power system, known as Damavand power plant. The proposed intelligent machine takes the advantages of a niching bio-inspired learning mechanism to be reconciled to the requirements of the problem at hand. The aim of the bio-inspired fuzzy based intelligent system is to yield a model capable of recognizing different operating parameters of Damavand power system under different operating conditions. To justify the privileges of using a niching metaheuristic over gradient descend methods, the authors use the data, derived through data acquisition, together with a machine learning based approach to estimate the multi-modality associated with the training of the proposed fuzzy model. Moreover, the niching bio-inspired metaheuristic, niching particle swarm optimization (NPSO), is compared to canonical PSO (CPSO), stochastic social PSO (SSPSO), unified PSO (UPSO), comprehensive learning PSO (CLPSO), PSO with constriction factor (PSOCF) and fully informed PSO (FIPSO). Through experiments and analysis of the characteristics of the problem being optimized, it is proved that NPSO is not only able to tackle the deficiencies of the learning process, but also can effectively adjust the fuzzy approach to conduct the identification process with a high degree of robustness and accuracy.
- 8 February 2014
- Published by Springer Nature in Meccanica
- Vol. 49 (6) , 1297-1326
Preferred design of recurrent neural network architecture using a multiobjective evolutionary algorithm with un-supervised information recruitment: a paradigm for modeling shape memory alloy actuators
- 8 February 2014
- Published by Springer Nature in Meccanica
- Vol. 49 (6) , 1297-1326
Preferred design of recurrent neural network architecture using a multiobjective evolutionary algorithm with un-supervised information recruitment: a paradigm for modeling shape memory alloy actuators
- 1 January 2014
- Published by ACTA Press in International Journal of Robotics and Automation
- Vol. 29 (4)
SEARCHING FOR SPECIAL CASES OF THE 6R SERIAL MANIPULATORS USING MUTABLE SMART BEE OPTIMIZATION ALGORITHM
- 1 January 2014
- Published by ACTA Press in International Journal of Robotics and Automation
- Vol. 29 (4)
SEARCHING FOR SPECIAL CASES OF THE 6R SERIAL MANIPULATORS USING MUTABLE SMART BEE OPTIMIZATION ALGORITHM
- 1 January 2006
- Published by Laser Institute of America
- Vol. 2006 (1) , 2004
Real-time prediction of dilution for automated laser powder deposition process
This paper presents a mathematical model for the real-time monitoring of the dilution in the laser powder deposition process. The proposed model predicts the melt pool depth and dilution as a function of clad height and clad width which in practice can be measured by a vision system. The model is based on the solution of heat diffusion equation using the solution of the heat diffusion due to a point heat source and the superposition principle. Numerical and experimental analyses show a non-linear behavior of the melt pool depth as a function of scanning speed when the other process parameters are kept constant. Using the model that has been validated by experiments, a combined parameter is introduced. This combined parameter which is a nonlinear function of the laser power, scanning speed and the clad height, has the most correlation with the melt pool depth. The comparisons between the numerical and experimental results show that this model is capable of predicting the characteristics of the laser powder deposition process accurately.
- 1 January 2006
- Published by Laser Institute of America
- Vol. 2006 (1) , 2004
Real-time prediction of dilution for automated laser powder deposition process
This paper presents a mathematical model for the real-time monitoring of the dilution in the laser powder deposition process. The proposed model predicts the melt pool depth and dilution as a function of clad height and clad width which in practice can be measured by a vision system. The model is based on the solution of heat diffusion equation using the solution of the heat diffusion due to a point heat source and the superposition principle. Numerical and experimental analyses show a non-linear behavior of the melt pool depth as a function of scanning speed when the other process parameters are kept constant. Using the model that has been validated by experiments, a combined parameter is introduced. This combined parameter which is a nonlinear function of the laser power, scanning speed and the clad height, has the most correlation with the melt pool depth. The comparisons between the numerical and experimental results show that this model is capable of predicting the characteristics of the laser powder deposition process accurately.