ZDZeynep Dereli̇

Zeynep Dereli̇

*This is an algorithmically generated author record based on publicly available information.

Zeynep Dereli̇ has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Association of salivary dynamics, psychological stress, and behavioral factors with tooth wear severity: a cross-sectional study.

    by Damla Yilmaz, Zeynep Dereli

    While the etiology of tooth wear is known to be multifactorial, data regarding the interaction between psychological profile, salivary dynamics, and clinical wear severity remain insufficiently elucidated. This study aimed to analyze the effects of psychological profile and salivary parameters-alongside demographic data, medical history, oral hygiene habits, and dietary patterns-on the severity of clinical tooth wear in a multivariable framework. Following institutional ethical approval and informed consent, this cross-sectional study included 101 volunteers (90% power), categorized by stress severity (DASS-21: normal, mild, moderate, severe, extremely severe), age groups (18-30, 31-40, 41-50, 51-60, 61-65 years) and salivary pH/buffering capacity levels (low, intermediate, high) for intergroup comparisons. Clinical wear severity was assessed using the Smith and Knight Tooth Wear Index (TWI); psychometric profiles were evaluated via the Depression Anxiety Stress Scale-21 (DASS-21). Salivary analyses (unstimulated pH and stimulated buffering capacity) utilized the GC Saliva-Check Buffer kit. Data were analyzed using independent t-tests, one-way ANOVA, and six-block hierarchical multiple linear regression (p < 0.05). The mean age was 46.7 years; significant differences in TWI scores existed among five age groups (18-30, 31-40, 41-50, 51-60, and 61-65 years; p < 0.05), with the highest wear severity observed in the 61-65 age group (Mean: 2.63). Severe stress (p = 0.008), low salivary pH and insufficient buffering capacity (p = 0.001), and acidic beverage consumption without a straw (p = 0.001) were significantly associated with higher TWI scores. In hierarchical regression, salivary buffering capacity (β = -0.289), straw use (β = -0.248), and salivary pH (β = -0.228) emerged as independent predictors of wear severity (R² = 0.519), whereas psychological variables did not contribute independently. These observational findings suggest that tooth wear severity is associated with the cumulative interplay of biological, behavioral, and psychological factors. Impaired salivary dynamics and specific behavioral patterns were the strongest independent correlates of wear severity; the role of psychological stress appears to operate indirectly, warranting further longitudinal investigation. These findings underline the potential value of considering salivary parameters and consumption-related behaviours when evaluating tooth wear risk in adults, while further longitudinal evidence is required before firm clinical recommendations can be made.

  • Open Access

    The effect of different herbal teas on the color stability of nanohybrid and bulk-fill composites

    by Makbule Tuğba Tunçdemir, Zeynep Dereli, Ayşe Bahar

    Aim: The aim of this study is to investigate the effects of green tea and rosehip tea, on the color stability of nanohybrid and bulk-fill composite resins. Methodology: A total of 60 disc-shaped samples were made from two types of A2 resin with nanohybrid (Tetric N Ceram, Ivoclar Vivadent, Schaan, Liechtenstein) and bulk-fill (Filtek Bulk-Fill, 3M ESPE, MN, USA) structure with the help of 10 mm diameter and 2 mm thick Teflon molds in this study. All samples were finished and polished with 4-stage (thick, medium, fine, superfine) polishing discs (Sof-lex, 3M ESPE, MN, USA) and kept in an oven at 37 °C for 24 hours. The samples, whose initial color measurements were made by spectrophotometer, were divided into subgroups for the control group and two different herbal teas (Green tea, Rosehip) (n=10). Color measurements were repeated, and ΔE values were calculated. Wilcoxon, Kruskal-Wallis, and Bonferroni tests were used to analyze the data (p < 0.05). Results: There was no statistically significant difference in color change between the composite resins (p > 0.05). No significant color change was found for either the Tetric N-Ceram or Filtek Bulk-Fill composite resin samples immersed in distilled water (p > 0.05, ΔEConclusion: Rosehip and green tea affect the color stability of composite resin restorations. Whereas the color change caused by green tea is at a clinically acceptable level, that stemming from rosehip tea falls within clinically unacceptable levels.   How to cite this article: Tunçdemir MT, Dereli Z, Bahar A. The effect of different herbal teas on the color stability of nanohybrid and bulk-fill composites. Int Dent Res 2022;12(Suppl.1):103-7. https://doi.org/10.5577/intdentres.445 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.


  • Effect of Polishing Systems on the Color and Surface Properties of Resin Composites in the Process of Accelerated Artificial Aging

    by Muhammet Fi̇dAn, Zeynep Dereli̇

    Objective: This study aimed to investigate the effects of polishing system on the color stability, surface roughness, and hardness of resin composites in the presence and absence of accelerated artificial aging (AAA). Methods: Six resin composites (Universal Restorative 200, G-Aenial Anterior, Ceram-X Duo, Admira, IPS Empress Direct, Clearfil Majesty Esthetic) were evaluated. Thirty disc-shaped samples were prepared for each composite group. Resin composite groups were divided into three subgroups: control (Mylar strip), disc (Optidisc), and rubber (Dimanto) (n=10). Color change (ΔE00) was calculated using the CIEDE 2000 formula. Before and after AAA, the surface roughness (Ra, μm) and hardness (VHN) values were measured. Data were analysed using ANOVA, the Bonferroni test, and Pearson correlation (p

  • Akıcı Kompozitler: Bir Literatür Derlemesi

    by Muhammet Fi̇dan, Zeynep Dereli̇

    Diş hekimliği pratiğinde akıcı kompozitler son yıllarda giderek popüler olmaya başlamıştır. Akıcı kompozitlerin vizkoziteleri, uyumlulukları, kıvamları ve manipulasyonlarının kolay olması, klinikte kullanımını cazip hale getirmektedir ve kullanım alanlarını genişletmektedir. Materyallerin özellikleri, klinik başarısı çalışmalarda araştırılmaktadır. Literatür incelendiğinde geleneksel kompozitler hakkında birçok bilgi olmasına rağmen akıcı kompozitler hakkında daha az bilgi vardır. Bu derlemede akıcı kompozitlerin klinik uygulamaları ve genel özellikleri hakkında bilgi verilmesi amaçlanmıştır.


  • Open Access

    TRANSLÜSENSİ ÖZELLİĞİNİN POLİSAJ UYGULANAN KOMPOZİT REZİNLERDE CIELAB VE CIEDE RENK SİSTEMLERİNE GÖRE KARŞILAŞTIRILMASI

    by Muhammet Fi̇dAn, Zeynep Dereli̇

    AMAÇ: Bu in vitro çalışmanın amacı, iki farklı polisaj sistemi uygulanan üç farklı kompozit rezinin iki farklı renk sistemine göre termal döngü işlemine tabii tutularak translusensi değerlerini karşılaştırmaktır. GEREÇ ve YÖNTEMLER: 60 adet disk şeklindeki kompozit materyaller(Tetric N-Ceram, Escom100 , Filtek 3M-ESPE Bulk-fill) üç gruba ayrıldı(n=20) ve her gruptaki örnekler iki polisaj sistemine göre alt gruplara ayrıldı(n=10). Translüsensi değerleri termal döngü önce ve sonrasında(10.000 döngü), CIELAB(L*a*b) ve CIEDE 2000 renk sistemlerine göre ölçümler yapılarak tespit edildi. Elde edilen verileri karşılaştırmak için üç yönlü varyas analizi(ANOVA) ve Bonferroni testinden yararlanıldı. Renk sistemleri arasındaki ilişkinin incelenmesi için Pearson korelasyon analizi kullanıldı. Tüm analizlerde anlamlılık düzeyi p<0,05 olarak belirlendi. BULGULAR: Kompozit rezin materyallere ait translüsensi değerleri karşılaştırıldığında gruplar arasında anlamlı farklılıklar elde edildi (p<0.05). Bulgulara göre translüsensi değeri en fazla olan kompozit materyal Escom100 iken en az olan materyalin ise 3M-ESPE Bulk-Fill olduğu tespit edildi ve istatistiksel olarak anlamlı fark bulundu (p<0.05). CIELAB(L*a*b) ve CIEDE 2000 renk sistemleri arasında istatistiksel olarak anlamlı bir farklılık bulundu ve pozitif bir korelasyonun olduğu tespit edildi (p<0.05). Polisaj sistemlerinin renk sistemlerine göre termal döngü öncesinde kompozit rezinlere etkileri benzerdir. Termal döngü sonrasında polisaj tekniklerinin renk sistemlerine etkisi istatistiksel olarak anlamlı bulunmuştur (p<0,05). SONUÇ: Kompozit materyaller translusensi değerleri arasında farklılıklar göstermektedir. CIELAB(L*a*b) ve CIEDE 2000 renk sistemlerinin translüsensi değişim ölçümlerinde istatistiksel olarak anlamlı bir uyum olduğu tespit edilmiştir. Dişe en yakın estetiği sağlamak amacıyla hem uygulanan polisaj sistemlerinin hem de kompozit rezinlerin translüsensi özelliğinin dikkate alınması gerekmektedir.


  • OFİS TİPİ BEYAZLATMA İŞLEMİNİN RENKLENDİRİLEN KOMPOZİT REZİN RESTORASYONLARA OLAN ETKİSİNİN İNCELENMESİ

    by Hakan Yasin Gönder, Zeynep Dereli̇

    Amaç:Bu çalışmanın amacı farklı solüsyonlar içerisinde bekletilen kompozit rezin örneklere ofis tipi bir beyazlatma ajan uygulanmasının etkisinin değerlendirilmesidir. Giriş: Kompozit rezinlerin en önemli dezavantajı zaman içinde kompozit rezinlerde meydana gelen renklenmelerdir. Özellikle anterior bölgede bulunan estetik kompozit rezin restorasyonların yenilenmesinin en önemli nedeni, zaman içinde restorasyonlarda meydana gelen renk değişikliğidir. Renklenmenin giderilmesi için restorasyonun yenilenmesi, diş dokusunda daha fazla madde kaybına yol açmasının ve zaman kaybına neden olmasının yanı sıra, ekonomik olarakta çok tercih edilir bir yöntem değildir. Gereç ve Yöntem: Bu çalışmada A1 renginde restoratif materyal Filtek™ Z550 Nano Hibrit Üniversal kullanıldı. Çalışmamızda 13 mm çapında ve 1,5 mm kalınlıkta dairesel boşluklara sahip bir politetrafloroetilen kalıp kullanılmıştır. Toplamda 40 adet örnek hazırlanmıştır (n=8). Restoratif materyaller su, çay, neskafe, kola ve kırmızı şarap olmak üzere 5 farklı solüsyon içinde, 30 gün süre ile renklendirildi. Renklenen kompozit materyalleri beyazlatmak için Opalescence® Boost Ofis Tipi Beyazlatma (%40 HP) kullanıldı. Bulgular: Su ve kola birlikte; çay ve neskafe birlikte ve şarap da hepsinden daha yüksek ortalama renklenme değerine sahip olacak şekilde tek başına hareket etmiştir. Ağartma işlemi sonucunda elde edilen ortalama renklendirme değerlerinin tüm solüsyonlarda farklı olduğu görülmüştür. Ağartma işleminde elde edilen ortalama renklendirme miktarları sadece şarapta ortalama olarak düşüş göstermiştir. Diğer solüsyonlarda elde edilen tüm renklendirme ortalama miktarları ağartma işlemi sonucunda elde edilen ortalama miktarından daha küçük değere sahiptir(p<0,05). Sonuç: Şarap gibi renklenmeyi çok fazla arttıran solüsyonlar için beyazlatma işlemi etkili olup renklenen kompozit rezinlerde rengin açılmasını sağlarken, renklenmesi olmayan kompozit rezinlerde rengin daha koyu veya opak olmasına neden olmuştur.