Akshay Kumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Akshay Kumar has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Bon Heun Koo
College of Mechatronic Engineering, Changwon National University, Changwon 51140, Gyeongsangnam-do, Republic of Korea
5 shared publications - Kavita Kumari
Department of Physics (SLAS) Mody University of Science and Technology Lachhmangarh Rajasthan India
4 shared publications - Mohit K. Sharma
School of Physical Sciences, Indian Institute of Technology Mandi, Condensed matter physics la, A8 building IIT Mandi, Mandi, Himachal Pradesh, 175005, India
3 shared publications - Seok-Hwan Huh
Samsung Electro-Mechanics Co., LTD
3 shared publications - Naveen Yadav
Department of Materials Convergence and System Engineering, Changwon National University, Changwon 51140, Gyeongsangnam-do, Republic of Korea
2 shared publications - Su-Jeong Park
Department of Materials Convergence and System Engineering, Changwon National University, Changwon 51140, Republic of Korea
2 shared publications
Latest Publications
- Open Access
- 29 March 2024
- Published by MDPI AG in Magnetochemistry
- Vol. 10 (4) , 22
Evidence of a Large Refrigerant Capacity in Nb-Modified La1.4Sr1.6Mn2−xNbxO7 (0.0 ≤ x ≤ 0.15) Layered Perovskites
In this work, evidence of isothermal magnetic entropy change () over a broad temperature region is presented in a series of La1.4Sr1.6Mn2−xNbxO7 Ruddlesden–Popper compounds with niobium modification (Nb) (0.0 ≤ x ≤ 0.15) at the manganese (Mn) site. The ceramic samples were obtained through a solid-state sintering method in optimized conditions. All compounds predominantly possessed Ruddlesden–Popper phase while a few additional reflections were resolved in Nb-doped compounds which indicates the separation of structural phases. These peaks are assigned to a separate layered perovskite and single perovskite with tetragonal symmetry and hexagonal symmetry, respectively. The microstructure of the pure sample reveals uniform grain morphology but in Nb-doped specimens chiefly three types of grains were found. It was assumed that the inter-connected large particles were of R-P phase which is dominant in both parent and x = 0.05 compounds, while the hexagonal and polygonal morphology of grains in higher concentrations of dopants directly corroborates with the symmetry of single perovskite and additional layered perovskite phases, respectively. The parent compound exhibits a single curve, whereas all Nb-substituted samples display bifurcated curves. This indicated two transition regions with multiple magnetic components, attributed to distinct structural phases. The highest values obtained for components corresponding to the R-P phase are 2.32 Jkg−1k−1, 0.75 Jkg−1k−1, 0.58 Jkg−1k−1 and 0.43 Jkg−1k−1 and for the second component located around room temperature are 0.0 Jkg−1k−1, 0.2 Jkg−1k−1, 0.28 Jkg−1k−1 and 0.35 Jkg−1k−1 for x = 0.0, 0.05, 0.10 and 0.15 compositions, respectively, at 2.5 T. Due to the collective participation of both components the was expanded through a broad temperature range upon Nb doping.- 29 March 2024
- Published by MDPI AG in Magnetochemistry
- Vol. 10 (4) , 22
Open AccessEvidence of a Large Refrigerant Capacity in Nb-Modified La1.4Sr1.6Mn2−xNbxO7 (0.0 ≤ x ≤ 0.15) Layered Perovskites
In this work, evidence of isothermal magnetic entropy change () over a broad temperature region is presented in a series of La1.4Sr1.6Mn2−xNbxO7 Ruddlesden–Popper compounds with niobium modification (Nb) (0.0 ≤ x ≤ 0.15) at the manganese (Mn) site. The ceramic samples were obtained through a solid-state sintering method in optimized conditions. All compounds predominantly possessed Ruddlesden–Popper phase while a few additional reflections were resolved in Nb-doped compounds which indicates the separation of structural phases. These peaks are assigned to a separate layered perovskite and single perovskite with tetragonal symmetry and hexagonal symmetry, respectively. The microstructure of the pure sample reveals uniform grain morphology but in Nb-doped specimens chiefly three types of grains were found. It was assumed that the inter-connected large particles were of R-P phase which is dominant in both parent and x = 0.05 compounds, while the hexagonal and polygonal morphology of grains in higher concentrations of dopants directly corroborates with the symmetry of single perovskite and additional layered perovskite phases, respectively. The parent compound exhibits a single curve, whereas all Nb-substituted samples display bifurcated curves. This indicated two transition regions with multiple magnetic components, attributed to distinct structural phases. The highest values obtained for components corresponding to the R-P phase are 2.32 Jkg−1k−1, 0.75 Jkg−1k−1, 0.58 Jkg−1k−1 and 0.43 Jkg−1k−1 and for the second component located around room temperature are 0.0 Jkg−1k−1, 0.2 Jkg−1k−1, 0.28 Jkg−1k−1 and 0.35 Jkg−1k−1 for x = 0.0, 0.05, 0.10 and 0.15 compositions, respectively, at 2.5 T. Due to the collective participation of both components the was expanded through a broad temperature range upon Nb doping. - Open Access
- 26 December 2022
- Published by MDPI AG in Magnetochemistry
- Vol. 9 (1) , 8
Evidence of Hysteresis Free Ferromagnetic Nature and Significant Magnetocaloric Parameters in FeNi Binary Alloy
In this study, our aim is to investigate the structural, magnetic, and magnetocaloric properties of the FeNi binary alloy. The FeNi alloy with Fe65Ni35 composition was prepared by ball milling followed by the annealing and quenching processes. A Rietveld refinement analysis of structural results reveals that this system has coexisting cubic structural phases with a dominant face-centered cubic phase (Fm-3m;γ-FeNi). Magnetization results of this compound indicate the presence of ferromagnetic ordering and the magnetic transition observed around 100 K. Moreover, an Arrott plot study provides information about the order of phase transition, which is found in the second-order near the ordering temperature, whereas first-order nature is also noted in the low-temperature region. The significant magnetocaloric parameters, i.e., magnetic entropy change (ΔSM~0.495 J/kg-K) and relative cooling power (88 J/kg), are noted over a wide temperature range. The power law dependency of magnetic entropy change with the applied field is also investigated. Due to their significant magnetocaloric performance over a wide temperature range, these multiphase alloys may be a good candidate for room-temperature to low-temperature magnetic refrigeration.
- 26 December 2022
- Published by MDPI AG in Magnetochemistry
- Vol. 9 (1) , 8
Open AccessEvidence of Hysteresis Free Ferromagnetic Nature and Significant Magnetocaloric Parameters in FeNi Binary Alloy
In this study, our aim is to investigate the structural, magnetic, and magnetocaloric properties of the FeNi binary alloy. The FeNi alloy with Fe65Ni35 composition was prepared by ball milling followed by the annealing and quenching processes. A Rietveld refinement analysis of structural results reveals that this system has coexisting cubic structural phases with a dominant face-centered cubic phase (Fm-3m;γ-FeNi). Magnetization results of this compound indicate the presence of ferromagnetic ordering and the magnetic transition observed around 100 K. Moreover, an Arrott plot study provides information about the order of phase transition, which is found in the second-order near the ordering temperature, whereas first-order nature is also noted in the low-temperature region. The significant magnetocaloric parameters, i.e., magnetic entropy change (ΔSM~0.495 J/kg-K) and relative cooling power (88 J/kg), are noted over a wide temperature range. The power law dependency of magnetic entropy change with the applied field is also investigated. Due to their significant magnetocaloric performance over a wide temperature range, these multiphase alloys may be a good candidate for room-temperature to low-temperature magnetic refrigeration.
- Open Access
- 9 September 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (18) , 9098
Structural, Magnetic, and Magnetocaloric Studies of Ball-Milled Fe100−xTx (T = Ni and Mn) Alloy
Iron-transition metal-based binary and ternary alloys have attracted great attention due to their relevant mechanical, electrical, and magnetic properties. In this paper, we systematically investigate the structural, magnetic, and magnetocaloric behavior of as-milled Fe65T35 (T = Ni and Mn) alloy. The polycrystalline alloys were produced by the planetary ball milling, using a powder-to-ball ratio of 1:3. A structural study reveals that both Fe65Ni35 and Fe65Mn35 compounds have stabilized in α and γ mixed phase within the cubic crystal structure. The alloyed compounds are further characterized by high-resolution field emission scanning electron microscopy (HR-FESEM), which confirms the mixing of both metals in the alloying process. Temperature-dependent magnetic studies do not show any blocking in zero-field-cooled and field-cooled results; however, the field-dependent magnetization study demonstrates the ferromagnetic nature with small hysteresis in both compounds. Both compounds show a significant magnetocaloric effect over a wide temperature range around room temperature. Fe65Ni35 exhibit a slightly higher value in comparison to Fe65Mn35. In both the alloys, magnetic entropy change follows the power law behavior against the external magnetic field, and the value of exponent ‘m’ explains the presence of magnetic correlation. Our investigation in this study communicates that the phase control or coexistence of both phases may be efficacious in obtaining the desirable characteristic of magnetic and magnetocaloric demeanors in such a binary Fe-T alloy.
- 9 September 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (18) , 9098
Open AccessStructural, Magnetic, and Magnetocaloric Studies of Ball-Milled Fe100−xTx (T = Ni and Mn) Alloy
Iron-transition metal-based binary and ternary alloys have attracted great attention due to their relevant mechanical, electrical, and magnetic properties. In this paper, we systematically investigate the structural, magnetic, and magnetocaloric behavior of as-milled Fe65T35 (T = Ni and Mn) alloy. The polycrystalline alloys were produced by the planetary ball milling, using a powder-to-ball ratio of 1:3. A structural study reveals that both Fe65Ni35 and Fe65Mn35 compounds have stabilized in α and γ mixed phase within the cubic crystal structure. The alloyed compounds are further characterized by high-resolution field emission scanning electron microscopy (HR-FESEM), which confirms the mixing of both metals in the alloying process. Temperature-dependent magnetic studies do not show any blocking in zero-field-cooled and field-cooled results; however, the field-dependent magnetization study demonstrates the ferromagnetic nature with small hysteresis in both compounds. Both compounds show a significant magnetocaloric effect over a wide temperature range around room temperature. Fe65Ni35 exhibit a slightly higher value in comparison to Fe65Mn35. In both the alloys, magnetic entropy change follows the power law behavior against the external magnetic field, and the value of exponent ‘m’ explains the presence of magnetic correlation. Our investigation in this study communicates that the phase control or coexistence of both phases may be efficacious in obtaining the desirable characteristic of magnetic and magnetocaloric demeanors in such a binary Fe-T alloy.
- Open Access
- 16 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8627
Unravelling the Anisotropic Behavior of Nickel—Wires Prepared through External Magnetic Field Assisted Hydrazine Reduction Method
Ni wires, prepared through a hydrazine reduction, were exposed to external magnetic fields of different geometrical shape and configuration during the synthesis denoted as Ni-Non-Magnetic, Ni-Double, Ni-Single, Ni-Ring. Their effect on the wire morphology, magnetization and magnetic anisotropy was then investigated via various characterization techniques viz. X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (HR-FESEM), and vibrating sample magnetometer (VSM). The polycrystalline single phase of the Ni-wires with face centered cubic symmetry was confirmed through the analysis of XRD patterns. Analysis of HR-FESEM images revealed that the Ni-particles were aligned in form of wire-like morphology. The Ni-single sample formed the wires with minimum diameter compared to the parent sample. The magnetization measurements performed at 300 K and 50 K demonstrated the ferromagnetic behavior of all the samples. The room temperature saturation magnetization (MS) and anisotropy constant (K) of the Ni-wires were reduced upon providing the external field during synthesis. However, the low temperature (50 K) magnetization behavior was rather opposing, indicating enhanced values of MS and K. Among all, Ni-ring sample showed maximum anisotropy with a value of 3.84 × 104 erg/cm3 at 50 K. The ambiguous nature of the anisotropic constant and saturation magnetization ascribed partly to the variation in diameters of Ni-wires and to the intermittent spin-spin exchange interactions of unaligned/partially aligned particles during the synthesis. Briefly, in the present study, it was established that the morphology and magnetic anisotropy of the Ni-wires could be tailored through the external magnetic field assisted synthesis method.
- 16 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8627
Open AccessUnravelling the Anisotropic Behavior of Nickel—Wires Prepared through External Magnetic Field Assisted Hydrazine Reduction Method
Ni wires, prepared through a hydrazine reduction, were exposed to external magnetic fields of different geometrical shape and configuration during the synthesis denoted as Ni-Non-Magnetic, Ni-Double, Ni-Single, Ni-Ring. Their effect on the wire morphology, magnetization and magnetic anisotropy was then investigated via various characterization techniques viz. X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (HR-FESEM), and vibrating sample magnetometer (VSM). The polycrystalline single phase of the Ni-wires with face centered cubic symmetry was confirmed through the analysis of XRD patterns. Analysis of HR-FESEM images revealed that the Ni-particles were aligned in form of wire-like morphology. The Ni-single sample formed the wires with minimum diameter compared to the parent sample. The magnetization measurements performed at 300 K and 50 K demonstrated the ferromagnetic behavior of all the samples. The room temperature saturation magnetization (MS) and anisotropy constant (K) of the Ni-wires were reduced upon providing the external field during synthesis. However, the low temperature (50 K) magnetization behavior was rather opposing, indicating enhanced values of MS and K. Among all, Ni-ring sample showed maximum anisotropy with a value of 3.84 × 104 erg/cm3 at 50 K. The ambiguous nature of the anisotropic constant and saturation magnetization ascribed partly to the variation in diameters of Ni-wires and to the intermittent spin-spin exchange interactions of unaligned/partially aligned particles during the synthesis. Briefly, in the present study, it was established that the morphology and magnetic anisotropy of the Ni-wires could be tailored through the external magnetic field assisted synthesis method.
- Open Access
- 22 August 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (17) , 3464
Enhanced Thermal Properties of Zirconia Nanoparticles and Chitosan-Based Intumescent Flame Retardant Coatings
Zirconia (ZrO2)-based flame retardant coatings were synthesized through the process of grinding, mixing, and curing. The flame retardant coatings reinforced with zirconia nanoparticles (ZrO2 NPs) were prepared at four different formulation levels marked by F0 (without adding ZrO2 NPs), F1 (1% w/w ZrO2 NPs), F2 (2% w/w ZrO2 NPs), and F3 (3% w/w ZrO2 NPs) in combination with epoxy resin, ammonium polyphosphate, boric acid, chitosan, and melamine. The prepared formulated coatings were characterized by flammability tests, combustion tests, and thermogravimetric analysis. Finally, char residues were examined with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The peak heat release rate (PHRR) of the controlled sample filled with functionalized ZrO2 NPs was observed to decrease dramatically with increasing functionalized ZrO2 NPs loadings. There was an increase in the limit of oxygen index (LOI) value with the increase in the weight percentage of ZrO2 NPs. The UL-94V data clearly revealed a V-1 rating for the F0 sample; however, with the addition of ZrO2 NPs, the samples showed enhanced properties with a V-0 rating. Thermal gravimetric analysis (TGA) results revealed that addition of ZrO2 NPs Improved composite coating thermal stability at 800 °C by forming high residual char. The results obtained here reveal that the addition of ZrO2 NPs in the formulated coatings has shown the excellent impact as flame retardant coatings.
- 22 August 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (17) , 3464
Open AccessEnhanced Thermal Properties of Zirconia Nanoparticles and Chitosan-Based Intumescent Flame Retardant Coatings
Zirconia (ZrO2)-based flame retardant coatings were synthesized through the process of grinding, mixing, and curing. The flame retardant coatings reinforced with zirconia nanoparticles (ZrO2 NPs) were prepared at four different formulation levels marked by F0 (without adding ZrO2 NPs), F1 (1% w/w ZrO2 NPs), F2 (2% w/w ZrO2 NPs), and F3 (3% w/w ZrO2 NPs) in combination with epoxy resin, ammonium polyphosphate, boric acid, chitosan, and melamine. The prepared formulated coatings were characterized by flammability tests, combustion tests, and thermogravimetric analysis. Finally, char residues were examined with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The peak heat release rate (PHRR) of the controlled sample filled with functionalized ZrO2 NPs was observed to decrease dramatically with increasing functionalized ZrO2 NPs loadings. There was an increase in the limit of oxygen index (LOI) value with the increase in the weight percentage of ZrO2 NPs. The UL-94V data clearly revealed a V-1 rating for the F0 sample; however, with the addition of ZrO2 NPs, the samples showed enhanced properties with a V-0 rating. Thermal gravimetric analysis (TGA) results revealed that addition of ZrO2 NPs Improved composite coating thermal stability at 800 °C by forming high residual char. The results obtained here reveal that the addition of ZrO2 NPs in the formulated coatings has shown the excellent impact as flame retardant coatings.