Yapei Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yapei Zhao has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Jibo Hu
School of Mechanical Engineering, Zhengzhou University of Aeronautics 1 , Zhengzhou 450046
2 shared publications - Dong Wang
School of Mechanical Engineering, Zhengzhou University of Aeronautics 1 , Zhengzhou 450046, People’s Republic of China
1 shared publication - Huibin Wang
School of Aerospace Engineering, Zhengzhou University of Aeronautics 2 , Zhengzhou 450046
1 shared publication - Kaishan Nie
School of Mechanical Engineering, Zhengzhou University of Aeronautics , Zhengzhou, Henan 450046
1 shared publication - Shuai Tian
School of Mechanical Engineering, Zhengzhou University of Aeronautics , Zhengzhou, Henan 450046
1 shared publication - Shusen Zhao
School of Mechanical Engineering, Zhengzhou University of Aeronautics, Zhengzhou, China
1 shared publication
Latest Publications
- 3 February 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (2)
Simulation and deposition experimental study of a microwave plasma chemical vapor deposition device with an oblique cone structure design
Microwave plasma chemical vapor deposition (MPCVD) equipment features a simple structure, high plasma electromagnetic field intensity, and is pollution-free, making it widely used in the diamond industry. This paper uses the finite element software ANSYS to perform structural design of the resonant cavity of the MPCVD device and optimizes the microwave electric field distribution of the core dimensions of the conical resonant cavity (resonant cavity radius and height) so that the electric field above the deposition platform is ellipsoidal and uniformly distributed. At the same time, a diamond film deposition experiment was conducted to verify the deposition effect of the skewed-conical resonator structure. The results indicate that when the height of the conical resonant cavity is 148 mm and the bottom radius is 116 mm, the electric field strength is 3.926 × 107 V/m, with the electric field in the substrate region more concentrated and stronger at the center. Deposition experiments show that at a deposition temperature of 850 °C, the diamond grain size tends to transform toward a cubic shape, the diamond peaks are sharp, and the residual stress is low, with the film’s indentation crack diameter being 307 μm, revealing its stronger electric field focusing capability and deposition stability.
- 3 February 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (2)
Simulation and deposition experimental study of a microwave plasma chemical vapor deposition device with an oblique cone structure design
Microwave plasma chemical vapor deposition (MPCVD) equipment features a simple structure, high plasma electromagnetic field intensity, and is pollution-free, making it widely used in the diamond industry. This paper uses the finite element software ANSYS to perform structural design of the resonant cavity of the MPCVD device and optimizes the microwave electric field distribution of the core dimensions of the conical resonant cavity (resonant cavity radius and height) so that the electric field above the deposition platform is ellipsoidal and uniformly distributed. At the same time, a diamond film deposition experiment was conducted to verify the deposition effect of the skewed-conical resonator structure. The results indicate that when the height of the conical resonant cavity is 148 mm and the bottom radius is 116 mm, the electric field strength is 3.926 × 107 V/m, with the electric field in the substrate region more concentrated and stronger at the center. Deposition experiments show that at a deposition temperature of 850 °C, the diamond grain size tends to transform toward a cubic shape, the diamond peaks are sharp, and the residual stress is low, with the film’s indentation crack diameter being 307 μm, revealing its stronger electric field focusing capability and deposition stability.
- 1 January 2026
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 50, 1-8
Study on the preparation of diamond-coated tools and their cutting performance using the segmented oxygen-doping method at low temperatures
The paper proposes a segmented oxygen-doping process technology and discusses and analyzes the surface morphology, quality, indentation morphology, and tool wear performance of diamond films. The results show that using the segmented oxygen-doping process (first low-temperature oxygen doping for 2 h, followed by high-temperature oxygen-free deposition for 9 h), the diamond morphology is uniform and clear, the residual stress of the diamond film is 0.674 GPa (about 53% of that of the high-temperature process), and the indentation crack diameter is about 312.7 µm. In addition, XRD peak intensity results show that the samples prepared by the segmented oxygen-doping process preferentially exhibit (111) and (110) orientations. The deposition reaction rate is increased to 3.64 µm/h (about 84% of the high-temperature process). The surface wear of diamond-coated tools is reduced to 92.0 µm, and the wear trend of the coated tools is lower than that of the low-temperature and high-temperature process wear curves, improving their wear resistance.
- 1 January 2026
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 50, 1-8
Study on the preparation of diamond-coated tools and their cutting performance using the segmented oxygen-doping method at low temperatures
The paper proposes a segmented oxygen-doping process technology and discusses and analyzes the surface morphology, quality, indentation morphology, and tool wear performance of diamond films. The results show that using the segmented oxygen-doping process (first low-temperature oxygen doping for 2 h, followed by high-temperature oxygen-free deposition for 9 h), the diamond morphology is uniform and clear, the residual stress of the diamond film is 0.674 GPa (about 53% of that of the high-temperature process), and the indentation crack diameter is about 312.7 µm. In addition, XRD peak intensity results show that the samples prepared by the segmented oxygen-doping process preferentially exhibit (111) and (110) orientations. The deposition reaction rate is increased to 3.64 µm/h (about 84% of the high-temperature process). The surface wear of diamond-coated tools is reduced to 92.0 µm, and the wear trend of the coated tools is lower than that of the low-temperature and high-temperature process wear curves, improving their wear resistance.
- 31 May 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (4)
Effects of nitrogen flow on the microstructure and mechanical properties of (TiZrNbMoTa)N high-entropy nitride films by magnetron sputtering
The binary nitride coatings corresponding to Ti, Zr, Nb, Mo, and Ta have good thermal stability, hardening wear resistance, and high-temperature oxidation resistance. Therefore, the high-entropy alloy nitride coating composed of these five elements is expected to show excellent mechanical properties, and it is suitable for extending tool life in dry-cutting environments. In this paper, (TiZrNbMoTa)Nx high-entropy nitride films were synthesized using a multitarget nonequilibrium magnetron sputtering technique. The paper aimed at investigating the effects of different nitrogen flow rates (FN) on the microstructure and mechanical properties of the films. The results show that, with the increase in FN, the deposition rate gradually decreased, the films exhibited a face-centered cubic structure, and the grain gradually changed from coarse columnar crystals to ultrafine grain structures. The hardness, elastic modulus, and binding force all showed a tendency to increase and then decreased with increasing FN. The hardness and elastic modulus reached their maximum values of 34.39 and 400.97 GPa, respectively, at an FN of 60 SCCM, and the formation of covalent bonds and grain refinement promoted the increase in hardness. This research provided a theoretical foundation for designing and preparing high-entropy ceramic coatings with high performance.
- 31 May 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (4)
Effects of nitrogen flow on the microstructure and mechanical properties of (TiZrNbMoTa)N high-entropy nitride films by magnetron sputtering
The binary nitride coatings corresponding to Ti, Zr, Nb, Mo, and Ta have good thermal stability, hardening wear resistance, and high-temperature oxidation resistance. Therefore, the high-entropy alloy nitride coating composed of these five elements is expected to show excellent mechanical properties, and it is suitable for extending tool life in dry-cutting environments. In this paper, (TiZrNbMoTa)Nx high-entropy nitride films were synthesized using a multitarget nonequilibrium magnetron sputtering technique. The paper aimed at investigating the effects of different nitrogen flow rates (FN) on the microstructure and mechanical properties of the films. The results show that, with the increase in FN, the deposition rate gradually decreased, the films exhibited a face-centered cubic structure, and the grain gradually changed from coarse columnar crystals to ultrafine grain structures. The hardness, elastic modulus, and binding force all showed a tendency to increase and then decreased with increasing FN. The hardness and elastic modulus reached their maximum values of 34.39 and 400.97 GPa, respectively, at an FN of 60 SCCM, and the formation of covalent bonds and grain refinement promoted the increase in hardness. This research provided a theoretical foundation for designing and preparing high-entropy ceramic coatings with high performance.