Yukai Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yukai Zhu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Yangyang Cui
School of Automation Science and Electrical Engineering, Beihang University, Beijing, China
4 shared publications Baopeng Zhu
School of Automation, Southeast University, Nanjing, China
2 shared publications- Jianzhong Qiao
School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China
2 shared publications - Yijia Xie
School of Automation Science and Electrical Engineering, Beihang University, Beijing, China
2 shared publications - Yongjian Yang
Beihang University
2 shared publications - Zhen Qin
School of Automation Science and Electrical Engineering, Beihang University, Beijing, China
2 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (22) , 52508-52520
Deep-Coupled Disturbance Learning-Based Attitude Consensus for Flexible Multispacecraft
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (22) , 52508-52520
Deep-Coupled Disturbance Learning-Based Attitude Consensus for Flexible Multispacecraft
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 10863-10872
Fixed-Time Disturbance Observer-Based Composite Controller for CMG Gimbal Servo Systems With Prescribed Performance
Based on prior failures of the control moment gyroscope (CMG) deployed on the International Space Station, the velocity of the gimbal should be kept within the preset range. Furthermore, the high-maneuvering tasks of the spacecraft require fast convergence of the gimbal servo system. However, the tracking performance is particularly vulnerable to disturbances (e.g. cogging torque and nonlinear friction), thereby leading to performance degradation of the CMG and the spacecraft. To address the problem, this paper proposes a fixed-time disturbance observer-based fixed-time sliding mode controller that can preassign the gimbal velocity-tracking transient performance (maximum overshoot, convergence time) and steady-state performance (accuracy). Notably, both the disturbance-estimation errors and the gimbal velocity-tracking errors are rigorously proven to converge to the expected bounded regions within a fixed time that is independent of the initial state. Finally, the hardware-in-the-loop experiments demonstrate the effectiveness and advantages of the proposed method.
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 10863-10872
Fixed-Time Disturbance Observer-Based Composite Controller for CMG Gimbal Servo Systems With Prescribed Performance
Based on prior failures of the control moment gyroscope (CMG) deployed on the International Space Station, the velocity of the gimbal should be kept within the preset range. Furthermore, the high-maneuvering tasks of the spacecraft require fast convergence of the gimbal servo system. However, the tracking performance is particularly vulnerable to disturbances (e.g. cogging torque and nonlinear friction), thereby leading to performance degradation of the CMG and the spacecraft. To address the problem, this paper proposes a fixed-time disturbance observer-based fixed-time sliding mode controller that can preassign the gimbal velocity-tracking transient performance (maximum overshoot, convergence time) and steady-state performance (accuracy). Notably, both the disturbance-estimation errors and the gimbal velocity-tracking errors are rigorously proven to converge to the expected bounded regions within a fixed time that is independent of the initial state. Finally, the hardware-in-the-loop experiments demonstrate the effectiveness and advantages of the proposed method.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 33 (10709908) , 371-375
Finetuning the Sample Points in Gaussian Filters via Neural Networks
Gaussian filters with deterministic sample points, such as the Unscented Kalman Filter (UKF), Cubature Kalman Filter (CKF), Gauss– Hermite Quadrature Filter (GHQF), etc., have been widely employed for nonlinear state estimation. However, these filters utilize a fixed set of sample points irrespective of the system's nonlinearity. While various studies have explored data-driven approaches to optimize the three parameters of the UKF, these methods do not generalize well to other Gaussian filters with a greater number of sample points. In this letter, we propose a novel neural network-based unified framework for finetuning sample points across all Gaussian filters with deterministic sample points. Specifically, we first pretrain a Multi-Layer Perceptron (MLP) to approximate the mapping from the state's mean and covariance to the sample points of the original Gaussian filter. The MLP then replaces the sample points generation strategy in the Gaussian filter and is further refined by maximizing the marginal likelihood of the observed measurement data. Simulation results demonstrate that the Gaussian filters leveraging the well-trained MLP as the sample point generation strategy achieve higher filtering accuracy compared to their original counterparts.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 33 (10709908) , 371-375
Finetuning the Sample Points in Gaussian Filters via Neural Networks
Gaussian filters with deterministic sample points, such as the Unscented Kalman Filter (UKF), Cubature Kalman Filter (CKF), Gauss– Hermite Quadrature Filter (GHQF), etc., have been widely employed for nonlinear state estimation. However, these filters utilize a fixed set of sample points irrespective of the system's nonlinearity. While various studies have explored data-driven approaches to optimize the three parameters of the UKF, these methods do not generalize well to other Gaussian filters with a greater number of sample points. In this letter, we propose a novel neural network-based unified framework for finetuning sample points across all Gaussian filters with deterministic sample points. Specifically, we first pretrain a Multi-Layer Perceptron (MLP) to approximate the mapping from the state's mean and covariance to the sample points of the original Gaussian filter. The MLP then replaces the sample points generation strategy in the Gaussian filter and is further refined by maximizing the marginal likelihood of the observed measurement data. Simulation results demonstrate that the Gaussian filters leveraging the well-trained MLP as the sample point generation strategy achieve higher filtering accuracy compared to their original counterparts.
- 26 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 8028-8037
Predefined-Time Antidisturbance Control for Periscope-Type Coarse Pointing Assembly Under Multiple Disturbances
The coarse pointing assembly (CPA) is a key actuator for satellite laser communication. In actual laser alignment tasks over distances of thousands or even tens of thousands of kilometers, extremely high requirements are placed on the CPA's angle position-tracking precision and rapidity. However, the aforementioned ultrahigh performance requirements encounter multiple disturbances including satellite vibration, and friction torque from the drive motor. To this end, this article proposes a novel antidisturbance control with predefined-time performance to deal with this problem. First, by fully utilizing the prior information of disturbances, a refined predefined-time disturbance observer (RPTDO) is designed to quickly and accurately estimate these disturbances. Second, to accomplish simultaneous compensation and suppression of multiple disturbances, a predefined-time composite controller is presented based on the output of the RPTDO. Finally, the effectiveness and advancement of the proposed method are demonstrated by experimental results.
- 26 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 8028-8037
Predefined-Time Antidisturbance Control for Periscope-Type Coarse Pointing Assembly Under Multiple Disturbances
The coarse pointing assembly (CPA) is a key actuator for satellite laser communication. In actual laser alignment tasks over distances of thousands or even tens of thousands of kilometers, extremely high requirements are placed on the CPA's angle position-tracking precision and rapidity. However, the aforementioned ultrahigh performance requirements encounter multiple disturbances including satellite vibration, and friction torque from the drive motor. To this end, this article proposes a novel antidisturbance control with predefined-time performance to deal with this problem. First, by fully utilizing the prior information of disturbances, a refined predefined-time disturbance observer (RPTDO) is designed to quickly and accurately estimate these disturbances. Second, to accomplish simultaneous compensation and suppression of multiple disturbances, a predefined-time composite controller is presented based on the output of the RPTDO. Finally, the effectiveness and advancement of the proposed method are demonstrated by experimental results.
- 20 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 7208-7219
Strength Quantification Composite Control for Flexible Satellites With Prescribed Performance
Attitude control performance under multiple disturbances is essential for flexible satellites to accomplish various missions, while the magnitude and rate of control signals (control strength) are also crucial for ensuring a long-term operation. In this article, a strength quantification composite control (SQCC) scheme, consisting of an extended refined disturbance observer (ERDO) and a prescribed performance controller (PPC), is proposed to meet the requirements of control performance and strength. First, a deep-coupled system model is constructed for satellites encompassing flexible dynamics and external disturbances. Then, based on an introduced exogenous disturbance system, the ERDO is proposed, utilizing partially known dynamics (e.g., vibration and polynomial) and parameters (e.g., damping ratios and frequencies), enabling accurate estimation of both flexible vibrations and external disturbances. Combining the ERDO and PPC, the SQCC scheme can achieve prescribed control performance and prequantified control strength simultaneously. Finally, numerical simulations and experimental studies demonstrate the efficacy of the proposed method.
- 20 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 7208-7219
Strength Quantification Composite Control for Flexible Satellites With Prescribed Performance
Attitude control performance under multiple disturbances is essential for flexible satellites to accomplish various missions, while the magnitude and rate of control signals (control strength) are also crucial for ensuring a long-term operation. In this article, a strength quantification composite control (SQCC) scheme, consisting of an extended refined disturbance observer (ERDO) and a prescribed performance controller (PPC), is proposed to meet the requirements of control performance and strength. First, a deep-coupled system model is constructed for satellites encompassing flexible dynamics and external disturbances. Then, based on an introduced exogenous disturbance system, the ERDO is proposed, utilizing partially known dynamics (e.g., vibration and polynomial) and parameters (e.g., damping ratios and frequencies), enabling accurate estimation of both flexible vibrations and external disturbances. Combining the ERDO and PPC, the SQCC scheme can achieve prescribed control performance and prequantified control strength simultaneously. Finally, numerical simulations and experimental studies demonstrate the efficacy of the proposed method.
- 13 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 61 (4) , 8853-8863
Refined Antidisturbance Attitude Control for Microsatellite With Actuator Dynamics Under Matched and Mismatched Disturbances
Multiple disturbances including reaction wheel back electromotive force (EMF) and solar panels vibration seriously restrict the improvement of microsatellite attitude control accuracy. Notably, these disturbances are physically multisource, mathematically heterogenous, affecting the system dynamics via isomeric channels. In response, a refined anti-disturbance attitude control scheme is proposed. Firstly, the microsatellite attitude deep coupling dynamics model is constructed by considering reaction wheel dynamics and multiple disturbances. Secondly, a linear disturbance observer is developed for back EMF, and an unknown frequency disturbance observer is designed for solar panels vibration to achieve accurate estimation. Based on the refined disturbances estimation, a non-singular fast terminal sliding mode controller is proposed to obtain high precision and rapid convergence of microsatellite attitude control system. Finally, both numerical simulations and hardware-in-loop experiments are conducted to demonstrate the effectiveness of the proposed strategy.
- 13 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 61 (4) , 8853-8863
Refined Antidisturbance Attitude Control for Microsatellite With Actuator Dynamics Under Matched and Mismatched Disturbances
Multiple disturbances including reaction wheel back electromotive force (EMF) and solar panels vibration seriously restrict the improvement of microsatellite attitude control accuracy. Notably, these disturbances are physically multisource, mathematically heterogenous, affecting the system dynamics via isomeric channels. In response, a refined anti-disturbance attitude control scheme is proposed. Firstly, the microsatellite attitude deep coupling dynamics model is constructed by considering reaction wheel dynamics and multiple disturbances. Secondly, a linear disturbance observer is developed for back EMF, and an unknown frequency disturbance observer is designed for solar panels vibration to achieve accurate estimation. Based on the refined disturbances estimation, a non-singular fast terminal sliding mode controller is proposed to obtain high precision and rapid convergence of microsatellite attitude control system. Finally, both numerical simulations and hardware-in-loop experiments are conducted to demonstrate the effectiveness of the proposed strategy.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (10) , 4501-4505
Analysis, Estimation, and Rejection of Multi-Frequency Unknown Disturbances in CMG Gimbal Servo Systems
This brief aims to deal with the CMG gimbal servo system’s velocity tracking problem in the presence of multi-frequency unknown disturbances. To fully comprehend the gimbal servo system, closed-loop uncertainty quantification is first employed. Second, an adaptive refined disturbance observer built on a second-order generalized integrator-frequency locked loop is designed to accurately separate and estimate multiple disturbances in the absence of precise frequency information. Subsequently, the PI controller is integrated to achieve multi-frequency unknown disturbances suppression and compensation. Finally, experimental results demonstrate the effectiveness of this method under multi-frequency unknown disturbances.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (10) , 4501-4505
Analysis, Estimation, and Rejection of Multi-Frequency Unknown Disturbances in CMG Gimbal Servo Systems
This brief aims to deal with the CMG gimbal servo system’s velocity tracking problem in the presence of multi-frequency unknown disturbances. To fully comprehend the gimbal servo system, closed-loop uncertainty quantification is first employed. Second, an adaptive refined disturbance observer built on a second-order generalized integrator-frequency locked loop is designed to accurately separate and estimate multiple disturbances in the absence of precise frequency information. Subsequently, the PI controller is integrated to achieve multi-frequency unknown disturbances suppression and compensation. Finally, experimental results demonstrate the effectiveness of this method under multi-frequency unknown disturbances.