Khatri Nirajan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Khatri Nirajan has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Mahmoud A. Ali
Xuefeng Mountain Energy Equipment Safety National Observation and Research Station, School of Electrical Engineering, Chongqing University, Chongqing, China
3 shared publications - Ruta W. Deusdedith
Xuefeng Mountain Energy Equipment Safety National Observation and Research Station, School of Electrical Engineering Chongqing University Chongqing China
3 shared publications - Xingliang Jiang
Xuefeng Mountain Energy Equipment Safety National Observation and Research Station, Chongqing University, Chongqing 400044, China
2 shared publications - Feipeng Wang
State Key Laboratory of Power Transmission Equipment Technology, Chongqing University, Chongqing, China
1 shared publication - Hualong Zheng
Xuefeng Mountain Energy Equipment Safety National Observation and Research Station, Chongqing University, Chongqing 400044, China
1 shared publication Muhammad Abdul Rahim
School of Materials Science and Engineering, Chongqing University, Shapingba, District, Chongqing City, P.R. China
1 shared publication
Latest Publications
- 7 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. PP (10709878) , 1
Modulating Structure and Properties of P(VDF-HFP)/Co 3 O 4 Nanocomposites with 2D Nanofillers
Poly (vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) is a strongly promising fluoropolymer because of outstanding flexibility, electrochemical consistency, and excellent dielectric property, making it promising material for dielectric and electronic applications. Nanocomposite films composed of P(VDF-HFP) and varying-concentration of 2D Co3O4 nano mesh are synthesized via spin-coating process. Mechanical, structural, morphological, dielectric, electrical characteristics of the nanocomposites are comprehensively studied. The FTIR and XRD analysis confirms the retention of electroactive β-phase and successful incorporation of Co3O4 nano mesh into polymer matrix with strong interfacial interactions. SEM study reveals a uniform dispersion at lower loadings and agglomeration at higher loadings. Mechanical testing shows that Young’s modulus increases from 123.05 MPa (0.0 wt.%) to 959.92 MPA (4.0 wt.%). Dielectric analysis reveals significant enhanced permittivity as the temperature increases for all nanocomposite films. AC conductivity also improves significantly with filler content, frequency and temperature. At 30 °C σac rises from 1.65 x 10-8 S/cm for 0.0 wt.% to 6.99 x10-3 S/cm for 7.0 wt.% composite at 107 Hz. The 4.0 wt.% sample shows a peak σac of 1.11 x 10-2 S/cm, indicating enhanced charge transport due to interfacial polarization and filler-induced conduction pathways. These results indicate that Co3O4 nanomesh effectively tunes the mechanical and dielectric response of P(VDF-HFP), although excessive loading leads to aggregation and higher dielectric loss.
- 7 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. PP (10709878) , 1
Modulating Structure and Properties of P(VDF-HFP)/Co 3 O 4 Nanocomposites with 2D Nanofillers
Poly (vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) is a strongly promising fluoropolymer because of outstanding flexibility, electrochemical consistency, and excellent dielectric property, making it promising material for dielectric and electronic applications. Nanocomposite films composed of P(VDF-HFP) and varying-concentration of 2D Co3O4 nano mesh are synthesized via spin-coating process. Mechanical, structural, morphological, dielectric, electrical characteristics of the nanocomposites are comprehensively studied. The FTIR and XRD analysis confirms the retention of electroactive β-phase and successful incorporation of Co3O4 nano mesh into polymer matrix with strong interfacial interactions. SEM study reveals a uniform dispersion at lower loadings and agglomeration at higher loadings. Mechanical testing shows that Young’s modulus increases from 123.05 MPa (0.0 wt.%) to 959.92 MPA (4.0 wt.%). Dielectric analysis reveals significant enhanced permittivity as the temperature increases for all nanocomposite films. AC conductivity also improves significantly with filler content, frequency and temperature. At 30 °C σac rises from 1.65 x 10-8 S/cm for 0.0 wt.% to 6.99 x10-3 S/cm for 7.0 wt.% composite at 107 Hz. The 4.0 wt.% sample shows a peak σac of 1.11 x 10-2 S/cm, indicating enhanced charge transport due to interfacial polarization and filler-induced conduction pathways. These results indicate that Co3O4 nanomesh effectively tunes the mechanical and dielectric response of P(VDF-HFP), although excessive loading leads to aggregation and higher dielectric loss.
- 16 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. PP (10709878) , 1
Surface Degradation Performance of 2D Nanosheets-Filled Silicone Rubber Insulator under DC Tracking and Erosion Stress
This study investigates the surface degradation behavior of silicone rubber (SiR) composites filled with two-dimensional (2D) nanosheets—molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂)—under high-voltage direct current (HVDC) tracking and erosion stress. Using standardized DC inclined plane testing (IEC 60587, IEEE Std 2652™-2021), the performance of 2D-filled composites is compared with conventional fillers, including aluminum trihydrate (ATH) and fumed silica, at a fixed loading of 5 wt.%. Key parameters such as eroded mass, track length, erosion depth, leakage current, thermal conductivity, and thermal stability are evaluated. Results show that 2D nanosheets significantly reduce erosion and tracking length, maintain lower and more stable surface temperatures, and enhance thermal stability compared to neat SiR and spherical-filler composites. MoS₂ and WS₂ fillers demonstrate superior performance, attributed to their high aspect ratios, layered morphology, and strong interfacial bonding with the SiR matrix, which promote tortuous thermal/electrical pathways and thermally stable char formation. The findings highlight the effectiveness of 2D nanofillers in developing advanced, erosion-resistant silicone rubber insulators for HVDC environments and underscore the critical role of filler morphology in optimizing DC tracking and erosion performance.
- 16 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. PP (10709878) , 1
Surface Degradation Performance of 2D Nanosheets-Filled Silicone Rubber Insulator under DC Tracking and Erosion Stress
This study investigates the surface degradation behavior of silicone rubber (SiR) composites filled with two-dimensional (2D) nanosheets—molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂)—under high-voltage direct current (HVDC) tracking and erosion stress. Using standardized DC inclined plane testing (IEC 60587, IEEE Std 2652™-2021), the performance of 2D-filled composites is compared with conventional fillers, including aluminum trihydrate (ATH) and fumed silica, at a fixed loading of 5 wt.%. Key parameters such as eroded mass, track length, erosion depth, leakage current, thermal conductivity, and thermal stability are evaluated. Results show that 2D nanosheets significantly reduce erosion and tracking length, maintain lower and more stable surface temperatures, and enhance thermal stability compared to neat SiR and spherical-filler composites. MoS₂ and WS₂ fillers demonstrate superior performance, attributed to their high aspect ratios, layered morphology, and strong interfacial bonding with the SiR matrix, which promote tortuous thermal/electrical pathways and thermally stable char formation. The findings highlight the effectiveness of 2D nanofillers in developing advanced, erosion-resistant silicone rubber insulators for HVDC environments and underscore the critical role of filler morphology in optimizing DC tracking and erosion performance.
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 33 (2) , 1411-1419
Investigation of Castor Oil Influence on DC Surface Flashover Voltage Characteristics of Epoxy Resin Insulators
The utilization of epoxy resin insulators for high voltage insulation continues to expand; however, surface flashover remains its significant challenge. Conventional methods for improving surface flashover voltage in epoxy insulators basically focus on physical and chemical changes while neglecting environmental and sustainability concerns involving petroleum epoxy resins. In this study, eco-friendly castor oil is incorporated into the epoxy matrix to enhance surface flashover voltage while promoting reduction of overreliance on finite petroleum resources. The successful integration of castor oil into the epoxy matrix is confirmed by Fourier Transform Infrared Spectroscopy, whereas the Atomic Force Microscopy and Scanning Electron Microscopy reveal smooth surfaces of composites at relatively low concentrations of castor oil, while higher concentrations beyond 30% lead to an increase in roughness. Samples’ relative permittivities are analyzed by using a Novocontrol spectrometer, which reveals the decrease in relative permittivity with the addition of castor oil into epoxy matrix. Notably, the positive and negative flashover voltages are enhanced by 17.47% and 18.49% respectively, at a castor oil concentration of 30 wt% with respect to epoxy resin, which is attributed to moderate trap parameters alongside favorable charge carrier mobility. These findings suggest that epoxy-castor oil biocomposite is a potential high voltage insulation material with reduced petroleum quantity and enhanced flashover voltage.
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 33 (2) , 1411-1419
Investigation of Castor Oil Influence on DC Surface Flashover Voltage Characteristics of Epoxy Resin Insulators
The utilization of epoxy resin insulators for high voltage insulation continues to expand; however, surface flashover remains its significant challenge. Conventional methods for improving surface flashover voltage in epoxy insulators basically focus on physical and chemical changes while neglecting environmental and sustainability concerns involving petroleum epoxy resins. In this study, eco-friendly castor oil is incorporated into the epoxy matrix to enhance surface flashover voltage while promoting reduction of overreliance on finite petroleum resources. The successful integration of castor oil into the epoxy matrix is confirmed by Fourier Transform Infrared Spectroscopy, whereas the Atomic Force Microscopy and Scanning Electron Microscopy reveal smooth surfaces of composites at relatively low concentrations of castor oil, while higher concentrations beyond 30% lead to an increase in roughness. Samples’ relative permittivities are analyzed by using a Novocontrol spectrometer, which reveals the decrease in relative permittivity with the addition of castor oil into epoxy matrix. Notably, the positive and negative flashover voltages are enhanced by 17.47% and 18.49% respectively, at a castor oil concentration of 30 wt% with respect to epoxy resin, which is attributed to moderate trap parameters alongside favorable charge carrier mobility. These findings suggest that epoxy-castor oil biocomposite is a potential high voltage insulation material with reduced petroleum quantity and enhanced flashover voltage.