DZDifan Zhou

Difan Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Difan Zhou has a total of 292 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Observation of valence band fine structures in R-type MoS2 by interlayer coupling

    by Huimin Liu, Wenjun Wu, Lei Liu, Chi Sin Tang, Jing Wu, Lei Zhang, Yuanjie Ning, Xian Lin, Difan Zhou, Shuo Sun, et al.

    Interlayer coupling offers a symmetry-sensitive pathway for engineering the electronic structure and optical response of atomically thin two-dimensional semiconductors. Here, we combine temperature-dependent spectroscopic ellipsometry with first-principles density functional theory (DFT) calculations to investigate large-area monolayer and bilayer 3R-phase MoS2 grown on Al2O3 substrates. Unlike monolayer-MoS2, bilayer 3R-MoS2 exhibits a fourfold valence-band fine structure at the K/K′ points. DFT calculations show that this splitting originates from interlayer-coupling-induced band separation that is further resolved by spin–orbit coupling under broken inversion symmetry. By comparison, bilayer-2H MoS2 preserves spin degeneracy because of inversion symmetry, highlighting the decisive role of stacking symmetry in controlling the valley-resolved band structure. Spectral-weight analysis further indicates an enhanced optical response in bilayer-3R MoS2, consistent with strengthened band nesting in the Γ–M region. These findings establish interlayer coupling and stacking symmetry as key parameters for tuning excitonic transitions, valley electronic structure, and light–matter interactions in two-dimensional transition metal dichalcogenides.

  • Dual-functional LiF for concurrent contact and channel modulation in monolayer MoS 2 transistors

    by Gui Li, Canfei Gao, Chi Sin Tang, Pan Chen, Chengxin Xu, Yuelun Mao, Chuanbing Cai, Difan Zhou, Zhigang Zeng, Xinmao Yin

    Transistors are the key components in many functional electronics. The performance of n-type field-effect transistors (FETs) based on MoS 2 is limited not only by metal–semiconductor contact performance (e.g. high contact resistance and Schottky barrier height) but also restricted by the interfacial disorders and scattering effects at active channels. In this work, we report a systematic study of lithium fluoride (LiF) used concurrently as a tunneling layer at the metal–MoS 2 interface and a capping layer on the active channel in monolayer MoS 2 FETs. An ultrathin LiF layer ([Formula: see text]2 nm) is thermally deposited before the metal deposition, which behaves as a tunneling layer. In addition, another LiF capping layer ([Formula: see text]10 nm) is deposited on the active channel to mitigate interfacial disorder and screen remote scattering effects, thereby improving intrinsic channel transport. According to the electrical transport characterization, the device shows significant improvement in terms of on-state current ([Formula: see text]83% increase), two-terminal field-effect mobilities ([Formula: see text]40% increase) and on-off ratio ([Formula: see text]2-fold increase) by adopting this proposed strategy. These results elucidate the role of ionic wide-bandgap insulating layers in the synergistic modulation of contacts and channels in two-dimensional semiconductors and provide a simple, generalizable pathway to high-performance, energy-efficient two-dimensional electronics.

  • Open Access

    Roadmap to Electrification of Transportation Systems Enabled by Superconducting Technology

    by Wenjuan Song, Mohammad Yazdani-Asrami, Ziad Melhem, Sergey Samoilenkov, Sergey Lee, Matthew A Rindfleisch, Mike J Tomsic, David Wayne Doll, Chris Kovacs, Xuan Peng, et al.

    Superconductivity was discovered more than a century ago, and it has achieved full commercialization for MRI and NMR applications. Superconducting technology has got on spotlight recent years for transportation, power network, and fusion energy, due to the significant advantages offered against its counterpart technologies, including lighter weight, compacter size, lower losses, higher efficiency, and higher power density. Therefore, many superconducting applications are moving towards higher technology readiness levels, with a fast pace. The accelerated research around superconducting applications for modern transportation is due to unique features of this technology towards decarbonisation via electrified systems. Meeting the Net Zero targets to decelerate global warming issue is the main driver of implementing the superconducting technology for aerospace, marine, and railway transport. However, many challenges still remain to be addressed for superconducting devices and applications, which will in turn pave the way for the commercialization of superconducting technology. In this article, a roadmap on electrification of transportation systems for aerospace, marine, and railway application is presented, covering challenges and solutions in design analysis, modelling, monitoring, and operation. A series of short articles are presented to outline the potential applications and solutions. These potential futuristic routes and their materials/technologies are considered/suggested for a 10-20 years time-frame.

  • Focus on Pinning Properties of RE -Ba-Cu-O Bulks and Tapes via Lift Factor Analysis

    by Ya Shi, Jiale Liu, Haoran Jiang, Dabin Wei, Kai Zhang, Yibing Zhang, Difan Zhou, Chuanbing Cai

    RE-Ba-Cu-O bulk superconductors can be magnetized to generate high flux density, making them promising for applications such as desktop NMR&MRI, HTS undulators and hybrid magnets assembled with magnets wound by HTS tapes. For these novel concepts, the pinning properties of RE-Ba-Cu-O bulk materials are critical for generating high trapped field and resisting demagnetization especially in cryogenic environments. In the presentation, we are going to report the trapped field of various RE-Ba-Cu-O samples (samples consisting different RE elements and chemical doping) under different temperatures and their lift factor as a macroscopic parameter. The lift factor of trapped field will be compared with that of the HTS tapes to reveal the difference in pinning characteristics between thin film and bulk HTS materials. Best on the achieved understanding, optimization from the material point of view will be proposed.

  • AC Loss Scaling of a REBCO Double-Pancake Coil Over Wide Temperature and Magnetic Field Regimes

    by Wenhao Li, Zhenan Jiang, Difan Zhou, Chuanbing Cai

    AC loss is a critical consideration in the design of high temperature superconducting (HTS) magnets. REBCO coils exhibit excellent current-carrying capabilities and are popular choices for applications such as fusion magnets and superconducting magnetic energy storage. However, there is currently a lack of research on the AC loss of REBCO coils under low temperature and high field conditions. A quantitative understanding of AC loss over wide temperature and magnetic field ranges is urgently needed. This paper investigates the dynamic resistance, magnetization loss, and total loss of a small double-pancake coil (DPC) based on a 2D axisymmetric H formulation, at temperatures of 25 K, 50 K, and 77 K in perpendicular AC magnetic fields up to 5 T. The results show that at different temperatures, the dynamic resistance, total loss, and loss components of the DPC can all be scaled by its critical current, Ic, coil. This implies that results from the high-temperature, low field regime can be used to predict the loss values in the low temperature, high-field regime. In addition, these scaling behaviors are quantitatively explained by the extended equations. This study is expected to provide a valuable reference for the estimation of losses in high-field magnets.

  • Dynamic resistance and total loss in DC-carrying REBCO stacks under AC magnetic fields with various orientations: role of J c ( B , θ ) dependence

    by Wenhao Li, Yueming Sun, Haoran Jiang, Shuangrong You, Difan Zhou, Zhan Zhang, Chuanbing Cai, Zhenan Jiang

    High-temperature superconducting (HTS) devices, such as magnets and flux pumps, often carry DC current when exposed to AC magnetic fields. Under these conditions, the total loss within the superconductor comprises the magnetization loss caused by the external AC magnetic field and the dynamic loss resulting from the interaction between the DC current and the AC field. In practice, AC fields with arbitrary orientations can alter the superconductor’s electromagnetic properties, affecting the efficiency and safety of HTS devices. However, a comprehensive study on the dynamic resistance and total loss in REBCO stacks under various field orientations is still lacking, and the effect of J c ( B ,   θ ) dependence on these characteristics still requires more systematic investigation. This work employs the H -formulation to investigate the dynamic resistance and total loss of two three-tape YBCO stacks-assembled from nearly isotropic Shanghai Creative tapes and strongly anisotropic SuperOx tapes-under field angles of 0 ∘ (perpendicular to the wide surface of a tape) to 85 ∘ at 77 K, and external magnetic fields up to 1 T. We elucidated the mechanism responsible for the differing behaviors of magnetization loss and dynamic resistance between the two stacks at various field angles, and clarified the correspondence between the angular dependence of loss components and that of J c when B a,  ⊥ is fixed. Furthermore, the correspondence between the angular dependence of J c and that of the flux flow loss and the corner field was also established. More importantly, we clarified how the interplay among the loss components influences the total loss characteristics under different field angles. Furthermore, based on the same critical current ( I c0_stack ), the total loss and loss components for the two stacks were fairly quantitatively compared at different field angles. Finally, case studies confirmed that the findings can be generalized beyond specific stack geometries. This study provides a valuable reference for understanding the complex loss behavior in HTS stacks and magnets, and for optimizing material selection to enhance their efficiency and safety margins.


  • Investigation of Magnetic Properties in Precisely Machined RE-Ba-Cu-O Bulk Superconductors for Use in Undulator Systems

    by Dabin Wei, Yimin Tong, Chan Liu, Zhuangwei Chen, Ya Shi, Difan Zhou, Marco Calvi, Alexandre Arsenault, Kai Zhang, Haixiao Deng

    A 50-period high-temperature superconducting (HTS) undulator consisting of staggered-array Gd-Ba-Cu-O (GdBCO)/Ag bulks is under development for application at the Shanghai Soft X-ray Free Electron Laser facility. The key fabrication challenges include precision electrical discharge machining of over 100 cylindrical bulks into half-moon shapes, shrink-fitting into copper sleeves, and grinding each assembly to 4 mm thickness, all while preserving superconducting properties. This paper presents the fabrication process and magnetic field mapping results of all completed samples, which were field-cooled and magnetized using a 0.3 T electromagnet at 77 K. Cracked samples were identified and excluded based on their trapped field profiles. The remaining qualified samples were assessed by integrating the trapped magnetic field over a specified area to quantify their superconducting performance, then sorted and positioned in a staggered-array undulator configuration. Simulation results indicate that the magnetic field inhomogeneity can be reduced to 1.9%, a level suitable for further optimization through adjustment of the ferromagnetic pole heights.


  • Efficient Two-Step PFM Process Employing Novel Crossed Fields Combination

    by Haoran Jiang, Tianxin Lan, Wenhao Li, Ya Shi, Dongxu Wang, Chuanbing Cai, Difan Zhou

    A reliable in-situ magnetization technique is crucial for exploiting the remarkable magnetic flux trapping capability of bulk superconductors in practical applications, such as nuclear magnetic resonance, MRI, superconducting rotating machines, and superconducting undulators. It has been reported that the magnetization efficiency of bulk superconductors can be improved by exploiting flux jump. We propose a novel magnetization method named crossed pulsed fields magnetization, combining a transverse pulsed field magnetization (PFM) followed by a perpendicular PFM. The experimental results suggest that transverse premagnetization can reduce the perpendicular pulsed field required for magnetization by exceeding 1.2 T and increase the magnetization efficiency by approximately 9.5% both at 50 and 30 K, which is of great significance to the practical applications of single-grain YBaCuO (YBCO) bulk superconductors in electromagnetic devices.


  • Design and test of HTS rotor magnets for high energy density motor

    by Yuxuan Zhang, Wenhao Li, Liwei Yong, Sisi Peng, Difan Zhou, Yibing Zhang, Xinmao Yin, Chuanbing Cai

    High-temperature superconducting (HTS) technology enables the realization of compact and efficient designs, with the potential to break through the bottleneck of high-power-density motors. In HTS motors, field windings are crucial components that significantly influence overall performance. The motor’s power capacity is generally proportional to the air gap magnetic field (B g), which is further limited by the critical current of the HTS coils. In this paper, we designed and tested a single pole magnet for the HTS rotor that generated B g of 3.39 T for an air gap of 3.5 mm and 3.04 T for an air gap of 15 mm at 30 K. These results are promising for high-energy-density motors, especially for HTS motors intended for aircraft. In addition, we established a 2D axisymmetric numerical model accommodating the J c ( B , θ ) dependence of the critical current of HTS tapes to yield a more accurate estimation of the critical current of the racetrack coils. This methodology has been validated with various HTS tapes possessing different intrinsic flux pinning properties, demonstrating high accuracy and effective capability in simulating HTS coil performance. This work provided valuable guidance for the design and optimization of future high-power-density superconducting motors, while also validating a universal numerical simulation method.


  • Influence of Coil Structure and Operating Frequency on Performance of Superconducting Wireless Power Transfer

    by Dongxu Wang, Wenhao Li, Jinxing Zheng, Xiaotong Cui, Sisi Peng, Difan Zhou, Yanqun Guo, Chuanbing Cai

    High-temperature superconducting (HTS) coil magnets possess extremely high quality factors, therefore having unique advantages when applied to wireless power transfer (WPT) systems especially under low-frequency conditions. The dependence of peak output power and transfer efficiency of an HTS WPT system on the operating frequency varies with the design of the coils because the structure of the coils significantly affects the resonant frequency and ac loss of the HTS WPT system. In this work, a high-power HTS WPT system, including the transfer characteristics under different coil structures, current-carrying conditions, and operating frequencies, has been investigated based on the finite-element simulation to find the optimized operating frequency band and coil structure. It has been found that the change of the inner radius and turn gap in both the solenoid and pancake coils induces a predictable transition frequency change. As the gap is varied, the transfer efficiency remains relatively constant for both coil types. However, for solenoids, reducing the gap value enhances the transferred power, whereas for pancake coils, increasing the gap value augments the transferred power. A transfer efficiency as high as 98.86% or more can be achieved under the optimal conditions.