MPMykola Pushkar

Mykola Pushkar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mykola Pushkar has a total of 33 co-authors. Here are the top co-authors by number of shared publications:

  • Hanna Zemlianukhina

    National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine

    3 shared publications
  • Mykolay Pechenik

    National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine

    3 shared publications
  • Nataliya Krasnoshapka

    National Technical University of Ukraine Igor Sikorsky Kyiv Polytechnic Institute,Department of Electromechanical Systems Automation and Electric Drives,Kyiv,Ukraine

    3 shared publications
  • Sergey Burian

    Національний технічний університет України «Київський технічний інститут ім. Ігоря Сікорського

    3 shared publications
  • Serhii Burian

    National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”,Department of Automation of Electromechanical Systems and Electric DriveKyivUkraine

    3 shared publications
  • Mykola Pechenik

    National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”,Department of Automation of Electromechanical Systems and Electric DriveKyivUkraine

    2 shared publications

Latest Publications

  • Open Access

    INVESTIGATION OF A SENSORLESS WATER SUPPLY SYSTEM FOR EXCESS ENERGY REDISTRI-BUTION FROM WIND TURBINE

    by Г. Ю. Землянухіна, С. О. Бур’яН, М. В. Печеник, Є. О. Троценко, М. В. Пушкар, H. Zemlianukhina, S. Burian, Ye. Trotsenko

    Environment-friendly and cost-effective generation of electricity from alternative sources is becoming particularly relevant in the context of rising energy prices for electricity generation, as well as due to the significant damage to Ukraine's energy system caused by the war. In certain areas, only stand-alone power generation systems can be used, as it is impractical and unprofitable to lay power grids in these areas. Such systems are usually based on a combination of wind or hydro turbines, drive motors and electric generators. It is characterised by high reliability, long service life, low cost and ease of maintenance. In times of military emergency, the operation of autonomous systems can be critical for people's lives and communication with the outside world. In addition, in such systems, the main con-sumers of electricity do not use the entire resource of energy generated by the wind turbine. Therefore, the issue of redistributing excess energy is relevant and can be solved by connecting a water supply system to provide ad-ditional potable water to consumers. At the same time, pressure instability in the hydraulic water supply network can worsen living conditions and lead to accidents and disruptions in technological processes.In connection with these challenges, there is a need to measure and stabilise the pressure in the hydraulic network, which can be done using observers of technological coordinates developed on the basis of the theory of artificial neural networks. The paper proposes a modern electromechanical control system for a turbomechanism powered by an alternative source of electrical energy, with a focus on stabilising the pressure in a hydraulic network using a pressure observer.A mathematical description of the main elements of the investigated system is given. The pressure estimator of the hydraulic network is built on the basis of artificial neural networks with a modified structure with feedback. The paper considers the operation of a sensorless pressure stabilisation system during changes in hydraulic re-sistance within the daily water consumption cycle with redistribution of excess energy generated by a wind tur-bine. The results and analysis of the developed estimator in sensorless control systems powered by a wind turbine with an electronic load controller are presented.

  • Design of the Generalized Infinite-Dimensional Chaotic System

    by Roman Voliansky, Mykola Pushkar, Oleg Sergienko, Nataliya Krasnoshapka, Oleksiy Sinkevych, Nina Volianska

    The paper deals with the design of theoretical backgrounds to construct the generalized infinite-dimensional chaotic system for secured communications. Contrary to known systems the proposed one consists of two subsystems: the basis chaotic core, which is well-known and produces chaotic oscillations under known conditions, and another subsystem is designed to perform some coordinate transformation of basis chaotic core output. In the most general case, we consider this transformation as performed using nonlinear functions. Both subsystems use information about previous values of system outputs and thus require to use the memory storage to generate oscillations, encrypt and decrypt information signals. To construct algorithms for hiding and restoring information, at first, we consider the system dynamic in the continuous time domain and then transform it into a discrete-time one. Such an approach allows us to get mathematical formulas that help us to implement our system in various digital devices, such as CPU, MCU, and FPGA. These formulas give us the possibility to hide the transmitted message and restore the received message with an accuracy of more than 99%.

  • Open Access

    INVESTIGATION OF ENERGY EFFICIENCY OF WATER SUPPLY SYSTEM WHEN POWERED BY AN ALTERNATIVE ENERGY SOURCE

    by M.V. Pechenik, S.O. Burian, H.Y. Zemlianukhina, M.V. Pushkar, V.I. Teriaiev

    The nature of the efficiency change in pump systems powered by an alternative source of electricity in conditions of a given pressure stabilization is investigated. An electromechanical water supply system powered by an alternative energy source using a static compensator (STATCOM) is considered. The observer of energy efficiency of the pump installation based on theory of artificial neural networks, which training occurs on the basis of static characteristics of the unit, is constructed. The results and analysis of investigations of the efficiency level changes during a typical daily cycle of water consumption are shown. References 12, figure 5.


  • Electromechanical system of turbomechanism when using an alternative source of electric energy

    by M Pechenik, S Burian, M Pushkar, H Zemlianukhina

    Purpose. Development of a water supply unit in the conditions of pressure control fed from a renewable source of electric energy with static compensator (STATCOM). Methodology. The research was carried out by the method of mathematical modeling in the application packages MATLAB SimPowerSystems and Simulink. The object of the study is a turbomechanism control system, which is powered by a wind turbine when regulating the voltage and realizes the pressure stabilization during the daily cycle of hydraulic resistance variations. The subject of the study is the structure development of a given level of pressure stabilization in the water supply unit. Findings. A mathematical model of a water supply control system powered by a wind turbine is presented. The unit tests the pressure at a given level in accordance with technological requirements. The nature of the variation in pump performance within the daily cycle of consumption when powered by a wind turbine, which in turn performs regulation using a static compensator, is studied. Originality. The system regulates the generated voltage by using a STATCOM, which allows you to maintain its level constant regardless of changes in the network hydraulic resistance. Practical value. Today, the use of alternative energy sources is becoming increasingly important. The developed conception will allow improving the existing water supply systems and designing new ones. It allows you to adjust the set level of pressure stabilization, while the output of generator is maintained constant under constant wind conditions.


  • Magnetization of the Magnetic Circuit of an Induction Motor with Massive End Ferromagnetic Screens

    by Nataliya Krasnoshapka, Mykola Pushkar

    The article is devoted to the calculation of energy characteristics of starting modes (transient time and energy consumption) of electric drives with induction motors with massive end ferromagnetic screens of elements of the rotor circuit outside the working air gap taking into account the saturation of the magnetic circuit. A feature of such electric machines is the variation of the rotor circuit parameters depending on the value of slip. This calculation is done using an iterative procedure, thus the additional variable parameter of the equivalent circuit significantly complicates the calculation. The obtained results were compared with the calculations at a constant value of the inductive magnetization resistance. It was determined that neglecting the nonlinearity of the magnetization curve increases the calculating error of energy characteristics by an average of 7-8%, but simplifies the iterative procedure for determining the frequency-dependent parameters of the rotor circuit and increases the accuracy of their calculation

  • Open Access

    ENERGY-EFFICIENT CONTROL OF PUMP UNITS BASED ON NEURAL-NETWORK PARAMETER OBSERVER

    by S.O. Burian, O.I. Kiselychnyk, M.V. Pushkar, V.S. Reshetnik, H.Y. Zemlianukhina

    Joomla! - the dynamic portal engine and content management system


  • Chua’s Circuit with Time-Depended Variable Capacitances and Its Synchronization

    by Roman Voliansky, Oleksandr Sadovoi, Yuliia Sokhina, Iurii Shramko, Mykola Pushkar

    The paper deals with the study of the parametrically driven Chua’s circuit. We use Lagrangian formalism together with Kirchhoff rules to perform modeling of parametrically driven Chua’s circuit. Such an approach allows us to represent the dynamic of Chua’s circuit by different state variables. This dynamic is described by differential equations in general form for some time-depended boundary functions, which describe the changing of capacitances. Thus, we define a general model for parametrically driven Chua’s circuit. Then this model is used to study Chua’s circuit dynamic with harmonically changed capacitors. We use numerical methods to solve differential equations of modified Chua’s circuit and prove its difference from classical Chua’s circuit. This difference is proven in time and frequency domains. Our studies show that chaotic oscillations in modified Chua’s circuit are nonlinear ones in the time domain and they have high-frequency harmonics in its harmonic spectrum. We plot 3D attractors of modified and classical Chua’s circuits, which prove circuits’ difference as well. We offer to avoid considering nonlinear functions while the synchronization controller is being designed by using minimal and maximal values of these functions only and constructing an interval model for Chua’s circuit. Combination of this model and feedback linearization methods allows us to design a simple sliding mode feedback controller, which transform the dynamic of Chua’s circuit into Brunovsky form. We use the simplest first order sliding mode controller in the control system feedforward to perform synchronization of the transformed object’s dynamic with an external signal.


  • Analysis of the Energy Efficiency of Pressure Stabilization Cascade Pump System

    by Mykola Pechenik, Serhii Burian, Mykola Pushkar, Hanna Zemlianukhina

    The character of change of the efficiency and power losses in pump systems under the conditions of stabilization of the rated pressure with the use of efficiency observers based on neural networks are investigated. Typical variants of construction of water supply systems and technological cycles are considered, which include a single pump system and a cascade scheme with two parallel-connected pumps, the total capacity of which corresponds to the capacity of a single-pump system. The investigation considered the likely character of changes in water consumption within the daily cycle for both systems. The results and analysis of studies of the level of energy losses in electromechanical pumping systems are presented.


  • Investigation of Energy Characteristics of the Electromechanical System in Multi-motor Conveyors under Variation of Traction Load Level on the Belt

    by Mykola Pechinik, Mykola Pushkar, Serhii Burian, Lyudmila Kazmina

    This paper deals with the investigation the energy characteristics of electric drive of the multi-motor belt conveyor with two drive motors in the head and one in the tail section at the change of freight traffic. Considered the typical variants of load changes within the technological cycle, which includes start of the conveyor in idle to the rated speed, gradual loading to nominal level of performance, operation at rated load and under the load fluctuations. It is proposed the voltage controller, which reduce energy losses in the electromechanical system at all stages of the technological cycle. The analysis of energy losses in case of one electric motor is presented, since such systems form the load distribution.


  • Investigation of the Pump Unit Control System With the Neural Network Productivity Estimator

    by Serhii Burian, Mykola Pechinik, Mykola Pushkar, Anna Tytarenko

    This article deals with the novel approach to evaluate the technological coordinates of a pump unit. This method is is based on the use of the theory of neural networks. The expanded methodology of design a productivity estimator using signals of pump pressure and motor power consumption is developed. It is shown that for the development of the estimator, is required preliminary information on the behavior of the desired coordinate when the task signal and disturbing actions in the system vary. The research of developed estimator by a method of mathematical modeling of pressure stabilization system is carried out. A comparison of the results of the system performance with the estimator and the calculated productivity value and the recommendations for the possible application of the proposed methodology are presented.