SUShingo Urata

Shingo Urata

*This is an algorithmically generated author record based on publicly available information.

Shingo Urata has a total of 132 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Bond Switching and Reformation in Lithium Borate Glasses Under Shear and Indentation

    by Shingo Urata

    Borate‐based glasses are expected to exhibit favorable mechanical responses, such as impact resistance, owing to their unique microstructure, in which boron adopts multiple coordination states and forms three‐membered superstructural rings. Although numerous experiments have characterized the microstructural changes under indentation and high‐pressure compression, the deformation mechanisms at the atomistic scale under extreme conditions remain under debate. In particular, it remains unclear how the small rings respond to deformation, such as ring‐slip motion to relieve excess stress, once alkali ions are incorporated. In this study, we therefore investigate the structural reorganization and deformation dynamics of lithium borate glasses under shear and indentation using molecular dynamics (MD) simulations. To accurately model the three‐membered‐ring‐rich microstructure, we employ a recently developed Raman‐informed reverse Monte Carlo (RiRMC) algorithm. Under simple shear, we identify a lithium‐mediated bond‐switching mechanism, characterized by a high probability of B–O bond breaking and reformation, which provides atomic‐scale evidence for macroscopic shear plasticity when alkali ions are abundant. Rather than ring‐slip motion, bond reformation leads to dynamic ring collisions, the formation of edge‐ and corner‐sharing ring structures, and localized defect‐like structures. Under compressive indentation, we observe permanent densification accommodated by a continuous transition from three‐ to four‐coordinated boron, together with a progressive dissolution of three‐membered rings even as the total number of B–O bonds increases. These observations suggest deformation pathways distinct from the ring‐slip mechanism proposed in earlier studies and motivate future in situ experimental validation.

  • Cooling Rate Effects on Thermal Expansion of Sodium Alkaline‐Earth Aluminosilicate Glasses: Experiments and Simulations

    by Rikiya Kado, Shingo Urata

    The coefficient of thermal expansion (CTE) is a critical property for oxide glass when used as a sealing material or carrier substrate, as matching the CTE with that of other materials is essential to prevent deformation, warping, and damage at the interface. The CTE is typically controlled by adjusting the glass composition; however, it is also influenced by the cooling rate during the production process. Nevertheless, the effect of cooling rate on the CTE of oxide glass materials has rarely been reported. In this study, the CTE and its dependence on cooling rate were experimentally investigated for a series of sodium aluminosilicate glasses with the composition (, Ca, Mg). The measurements were conducted at cooling rates of 1 and 100 K/min. Consequently, the effect of cooling rate was found to be more pronounced in ‐lean glasses, while it was insignificant for glasses with [] []. To elucidate the mechanism underlying the influence of content on the cooling rate dependence of the CTE, molecular dynamics (MD) simulations were conducted using two methods to estimate the CTE. The first method involved heating simulations to evaluate the volume change with temperature, while the second method measured fluctuations in enthalpy and volume to determine the CTE. The effect of cooling rate was investigated by performing MD simulations at four cooling rates: 0.1, 1, 10, and 100 K/ps, for two contrasting glass compositions, and , in . Consequently, the experimental trend—where the glass with is less sensitive to the cooling rate—was successfully reproduced by both methods when the glass structures were sufficiently equilibrated prior to measuring the CTE. Microstructure analyses revealed that doping stabilizes calcium coordination in the glass, thereby reducing the influence of cooling rate on the CTE. This may be attributed to the tendency of alkaline‐earth ions to localize around aluminum segregation.


  • Simulations of mechanical responses in v‐B 2 O 3 glass under indentation and shear deformation

    by Shingo Urata

    The boroxol ring is a planar three‐membered ring and represents a characteristic microstructure in vitreous borate glass (v‐). Molecular dynamics simulations of indentation were conducted using a machine‐learning force field to investigate the mechanical response of v‐ models containing different concentrations of boroxol rings. According to indentation simulations performed with a V‐shaped indenter, plastic deformation was observed regardless of the boroxol ring population in the glass models. A certain fraction of boroxol rings was disrupted during loading, and the ring structures were rarely reformed upon unloading the indenter. In addition, irreversible distortion of B–O–B and O–B–O bond angles was observed as a signature of plastic deformation. In contrast, increased boron coordination due to loading was largely recovered upon unloading. Furthermore, boron atoms rarely changed their coordination number under shear deformation, indicating that changes in boron coordination are not responsible for plastic deformation under shear deformation. Analysis of the cross‐correlation function of boroxol ring orientations has revealed that boroxol rings are unable to align their orientations when they are brought closer than approximately 3Å due to shear deformation. Consequently, we conclude that the slip motion of boroxol rings under shear deformation does not occur in v‐, which is in contrast to sodium borate glass, (, where slip motion has been suggested based on an experimental indentation study.


  • Structures of sodium aluminophosphate glasses from molecular dynamics simulations and experimental validation

    by Navid Marchin, Masari Watanabe, Taro Kobayashi, Federica Lodesani, Shingo Urata, Jincheng Du

    Modeling phosphate glasses presents significant challenges due to their intermediate‐range structural complexity. This study focuses on developing a classical potential to model sodium aluminophosphate glasses, incorporating a three‐body term to the existing effective two body potentials using molecular dynamics (MD) simulations with improved structural accuracy. The three‐body term parameters were initially parameterized by fitting to density functional theory (DFT)‐relaxed crystalline phosphates and subsequently refined by modeling binary and ternary phosphate glasses. The potential's performance was assessed by modeling six ternary sodium aluminophosphate glasses, three of which were prepared and characterized experimentally. Computational results were validated against Raman spectroscopy and 27 Al and 31 P magic‐angle spinning (MAS) NMR experimental data and compared to those from previous studies. Incorporating the three‐body potential was found to notably improved the Al coordination number, aligning more closely with NMR results, although there is still a gap between computational and experimental results, specifically for P‐rich glasses. Additionally, the three‐body term enhanced the regulation of intertetrahedral bond angles toward experimental values, with additional improvements in bond distances and Q n distribution. These findings demonstrate the capability of MD simulations in elucidating the complex atomic level structures of phosphate glasses. The results provided insinghts on the short and medium range structures of these glasses and highlight the importance of three‐body interactions in modeling phosphate and aluminophosphate glasses.


  • Hydrophobicity-Governed Protein Adsorption on Poly(ω-methoxyalkyl acrylate) Surfaces: A Coarse-Grained Molecular Dynamics Study

    by Hari O. S. Yadav, An-Tsung Kuo, Shingo Urata, Kosuke Funahashi, Yutaka Imamura, Wataru Shinoda

    Polymeric materials are widely used in medical devices, where their interactions with proteins play a critical role in determining biocompatibility. To better understand and predict these interactions, we extend the coarse-grained force field (FF), SPICA, to simulate protein adsorption on poly(ω-methoxyalkyl acrylate) (PMCxA) and poly(n-butyl acrylate) (PBA) surfaces. Notably, poly(2-methoxyethyl acrylate) (PMEA), a member of PMCxA family, is approved by the U.S. Food and Drug Administration for clinical applications. Our polymer FF was parametrized using the physical properties─density, interfacial tension, and hydration free energy─of small-molecule analogs representing the monomer units. Protein-polymer interactions were further calibrated using adsorption free energies of amino acid side-chain analogs on polymer-based monolayers. The developed SPICA-FF accurately reproduces both bulk polymer properties and protein adsorption behaviors in agreement with experimental and atomistic simulation data. Our simulations show that PBA strongly attracts water-soluble globular proteins, while PMEA resists adsorption when proteins retain their native structures. For PMCxA variants, protein adsorption correlates linearly with both surface water contact angle and the free energy of cavity formation at the interface, highlighting surface hydrophobicity─particularly the number of methylene units in the polymer side chains─as a key determinant. This work offers a validated framework for studying protein-polymer interactions at a coarse-grained level, enabling more efficient screening and design of polymer surfaces for medical applications. It highlights the significance of polymer surface chemistry in determining protein behavior, offering valuable insights for the rational design of biocompatible materials.