Improvement of the Electrochemical Performance of Ln0.58Sr0.4Fe0.8Co0.2O3 – δIT‐SOFC Cathodes by Ternary Lanthanide Combinations (La‐Pr‐Sm)
- 3 August 2010
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 10 (4) , 693-702
Abstract
Active perovskite‐based SOFC cathodes have been developed through lanthanide combination in the (La1 –x –yPrxSmy)0.58Sr0.4Fe0.8Co0.2O3 – δsystem following a ternary mixture experimental design. These compositions were prepared through a sol–gel method and characterised by electrochemical impedance spectroscopy (EIS) as symmetrical cells on GDC‐electrolyte samples in the 450–650 °C temperature range. The electrochemical properties of the single lanthanide‐based Ln0.58Sr0.4Fe0.8Co0.2O3 – δcompounds were enhanced when different lanthanides were combined together in the same crystalline structure. The observed improvement does not follow a mere additional effect of the performance from the parent Ln0.58Sr0.4Fe0.8Co0.2O3 – δcompounds, i.e. it does not follow a linear behaviour, and the better performance is ascribed to synergetic catalytic effects among lanthanide cations. A reduction in electrode polarisation resistance with respect to non‐substituted compositions is stated for most Ln0.58Sr0.4Fe0.8Co0.2O3 – δelectrode compositions combining two or three lanthanides. Samarium addition to the electrode material involves a substantial reduction in the activation energy and the reduction degree is directly dependant on the samarium amount incorporated in the lattice. The best performing composition comprises a praseodymium‐rich lanthanum‐based electrode material. The experimental data derived from the ternary mixture design were modelled using nonlinear functions and this modelling allowed finding an electrode composition minimising the polarisation resistance while maintaining the activation energy at reduced values. Selected cathode compositions were tested in fully assembled anode‐supported cells and electrochemical characterisation supports the cooperative effect of lanthanide combination.Keywords
This publication has 36 references indexed in Scilit:
- Optimization of Oxygen Activation Fuel‐Cell Electrocatalysts by Combinatorial DesignsChemSusChem, 2009
- Influence of Barium Incorporation on the Electrochemical Performance of Ln0.58Sr0.4Fe0.8Co0.2O3–δ(Ln=La, Pr, Sm) Perovskites for Oxygen Activation at Intermediate TemperaturesFuel Cells, 2009
- Ahead of the Lanthanide Contraction; Pressure and Ionic Size in the Synthesis of MSr2RECu2O8(RE = Rare Earth, M = Ru, Cr, Ir): a Gaussian RelationInorganic Chemistry, 2008
- Screening of A-Substitution in the System A[sub 0.68]Sr[sub 0.3]Fe[sub 0.8]Co[sub 0.2]O[sub 3−δ] for SOFC CathodesJournal of the Electrochemical Society, 2008
- SOFC-anodes, proof for a finite-length type Gerischer impedance?Solid State Ionics, 2006
- Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cellsSolid State Ionics, 2005
- High-performance lanthanum-ferrite-based cathode for SOFCSolid State Ionics, 2005
- Interpretation of the Gerischer impedance in solid state ionicsSolid State Ionics, 2003
- Surface modification of La(Sr)MnO3 electrodesSolid State Ionics, 1998
- Catalysis of the electrochemical processes on solid oxide fuel cell cathodesJournal of Power Sources, 1996