Microstructural Evolution and Mechanical Properties of SiC/Al-40Si Composites Fabricated by High Pressure Solidification
Open Access
Abstract
The microstructure and mechanical properties of SiC/Al-40Si composites prepared under high pressure were studied. As the pressure increases from 1 atm to 3 GPa, the primary Si phase in the Al-40Si alloy is refined. With increasing pressure, the composition of the eutectic point increases, the solute diffusion coefficient decreases exponentially, and the concentration of Si solute at the front of the solid–liquid interface of the primary Si is low, which contributes to the refining of the primary Si and inhibiting its faceted growth. The bending strength of SiC/Al-40Si composite prepared under 3 GPa was 334 MPa, which was 66% higher compared to the Al-40Si alloy prepared under the same pressure.Keywords
Funding Information
- National Natural Science Foundation of China (52231002, 2023J01346, GY-Z220187, XNAUEA5640208420, 6142909210202)
- Natural Science Foundation of Fujian Province (52231002, 2023J01346, GY-Z220187, XNAUEA5640208420, 6142909210202)
- Scientific Research Foundation of Fujian University of Technology (52231002, 2023J01346, GY-Z220187, XNAUEA5640208420, 6142909210202)
- “Head Goose” team project (52231002, 2023J01346, GY-Z220187, XNAUEA5640208420, 6142909210202)
- Foundation of National Key Laboratory for Precision Hot Processing of Metals (52231002, 2023J01346, GY-Z220187, XNAUEA5640208420, 6142909210202)
This publication has 33 references indexed in Scilit:
- Microstructure and properties of Sip/Al–20 wt% Si composite prepared by hot-pressed sintering technologyJournal of Materials Science, 2013
- Structure and photocatalytic property of Mo-doped TiO2 nanoparticlesPowder Technology, 2013
- Solute redistribution during planar growth of intermetallic compound with nil solubilityIntermetallics, 2012
- Al2O3 nanoparticles induced simultaneous refinement and modification of primary and eutectic Si particles in hypereutectic Al–20Si alloyMaterials Science and Engineering: A, 2012
- Density and thermal expansion of liquid Al–Si alloysJournal of Materials Science, 2012
- Influence of fraction of high angle boundaries on the mechanical behavior of an ultrafine grained Al–Mg alloyMaterials Science and Engineering: A, 2010
- Chemistry at high pressureChemical Society Reviews, 2006
- Nanomaterials under high-pressureChemical Society Reviews, 2006
- New materials from high pressure experiments: Challenges and opportunitiesHigh Pressure Research, 2003
- New materials from high-pressure experimentsNature Materials, 2002