Design Optimization of a High-Speed Twin-Stage Compressor for Next-Gen Aircraft Environmental Control System
- 8 December 2022
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 145 (3)
Abstract
The environmental control system (ECS) is the largest auxiliary power consumer, i.e., around 75% of non-propulsive power, among the aircraft subsystems. The adoption of a novel ECS architecture, based on an electrically-driven vapor compression cycle system, can enable a twofold increase of coefficient of performance at cruise conditions, as compared to the conventional air cycle machine. The core of this technology is a high-speed, miniature centrifugal compressor, consisting of two impellers mounted in back-to-back configuration, and running on gas bearings, operating with refrigerant. The fluid dynamic design optimization of the twin-stage compressor, to be installed in the vapor compression cycle test rig under realization at Delft University of Technology, is documented in this paper. First, the scaling analysis for centrifugal compressor is extended to provide guidelines for the design of twin-stage machines. Then, a multi-objective conceptual design optimization is performed by resorting to an in-house reduced-order model (ROM), coupled to a genetic algorithm. The fluid dynamic performance and the structural integrity of the optimal design are assessed by means of a hybrid framework, encompassing computational fluid dynamics and ROMs, and by finite element analysis. The results show that it is possible to design a twin-stage compressor for the target application, featuring an average efficiency higher than 70%, a maximum compression ratio exceeding 9, and an operating range of 0.27 at the design rotational speed, despite the detrimental effects of motor cooling and miniature size.Keywords
Funding Information
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (17091)
This publication has 14 references indexed in Scilit:
- The Design Space Boundaries for High Flow Capacity Centrifugal CompressorsJournal of Turbomachinery, 2013
- Design, experimental investigation and multi-objective optimization of a small-scale radial compressor for heat pump applicationsEnergy, 2010
- Experimental investigation of a direct driven radial compressor for domestic heat pumpsInternational Journal of Refrigeration, 2009
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002
- On the Design Criteria for Suppression of Secondary Flows in Centrifugal and Mixed Flow ImpellersJournal of Turbomachinery, 1998
- A study on the rotating stall of centrifugal compressors. 2nd report, Effect of vaneless diffuser inlet shape on rotating stall.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 1990
- A Critical Evaluation of Three Centrifugal Compressors With Pedigree Data Sets: Part 5—Studies in Component PerformanceJournal of Turbomachinery, 1987
- The three isentropic exponents of dry steamForschung im Ingenieurwesen, 1985
- Detailed Flow Investigations Within a High-Speed Centrifugal Compressor ImpellerJournal of Fluids Engineering, 1976
- Instantaneous Measurements in the Jet-Wake Discharge Flow of a Centrifugal Compressor ImpellerJournal of Engineering for Power, 1975