Andrea Giuffre'
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Andrea Giuffre' has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Matteo Pini
Propulsion & Power, Faculty of Aerospace Engineering, Delft University of Technology, 2628 CD Delft, The Netherlands
6 shared publications - Piero Colonna
Delft University of Technology
4 shared publications - Carlo De Servi
Propulsion and Power, Delft University of Technology
3 shared publications - Federica Ascione2 shared publications
- Francesco Tosto
Propulsion and Power, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Nethelands
1 shared publication
Latest Publications
- Open Access
- 2 July 2025
- Published by Elsevier in International Journal of Refrigeration
- Vol. 178, 379-395
Integrated design optimization of a novel electrically-driven helicopter ECS using low-GWP refrigerants as working fluid
- 2 July 2025
- Published by Elsevier in International Journal of Refrigeration
- Vol. 178, 379-395
Open AccessIntegrated design optimization of a novel electrically-driven helicopter ECS using low-GWP refrigerants as working fluid
- Open Access
- 10 February 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 244
Dynamic thermal model of passenger aircraft for the estimation of the cabin cooling and heating requirements
- 10 February 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 244
Open AccessDynamic thermal model of passenger aircraft for the estimation of the cabin cooling and heating requirements
- Open Access
- 15 March 2023
- Published by Elsevier in International Journal of Refrigeration
- Vol. 151, 354-369
Data-driven modeling of high-speed centrifugal compressors for aircraft Environmental Control Systems
- 15 March 2023
- Published by Elsevier in International Journal of Refrigeration
- Vol. 151, 354-369
Open AccessData-driven modeling of high-speed centrifugal compressors for aircraft Environmental Control Systems
- 8 December 2022
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 145 (3)
Design Optimization of a High-Speed Twin-Stage Compressor for Next-Gen Aircraft Environmental Control System
The environmental control system (ECS) is the largest auxiliary power consumer, i.e., around 75% of non-propulsive power, among the aircraft subsystems. The adoption of a novel ECS architecture, based on an electrically-driven vapor compression cycle system, can enable a twofold increase of coefficient of performance at cruise conditions, as compared to the conventional air cycle machine. The core of this technology is a high-speed, miniature centrifugal compressor, consisting of two impellers mounted in back-to-back configuration, and running on gas bearings, operating with refrigerant. The fluid dynamic design optimization of the twin-stage compressor, to be installed in the vapor compression cycle test rig under realization at Delft University of Technology, is documented in this paper. First, the scaling analysis for centrifugal compressor is extended to provide guidelines for the design of twin-stage machines. Then, a multi-objective conceptual design optimization is performed by resorting to an in-house reduced-order model (ROM), coupled to a genetic algorithm. The fluid dynamic performance and the structural integrity of the optimal design are assessed by means of a hybrid framework, encompassing computational fluid dynamics and ROMs, and by finite element analysis. The results show that it is possible to design a twin-stage compressor for the target application, featuring an average efficiency higher than 70%, a maximum compression ratio exceeding 9, and an operating range of 0.27 at the design rotational speed, despite the detrimental effects of motor cooling and miniature size.
- 8 December 2022
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 145 (3)
Design Optimization of a High-Speed Twin-Stage Compressor for Next-Gen Aircraft Environmental Control System
The environmental control system (ECS) is the largest auxiliary power consumer, i.e., around 75% of non-propulsive power, among the aircraft subsystems. The adoption of a novel ECS architecture, based on an electrically-driven vapor compression cycle system, can enable a twofold increase of coefficient of performance at cruise conditions, as compared to the conventional air cycle machine. The core of this technology is a high-speed, miniature centrifugal compressor, consisting of two impellers mounted in back-to-back configuration, and running on gas bearings, operating with refrigerant. The fluid dynamic design optimization of the twin-stage compressor, to be installed in the vapor compression cycle test rig under realization at Delft University of Technology, is documented in this paper. First, the scaling analysis for centrifugal compressor is extended to provide guidelines for the design of twin-stage machines. Then, a multi-objective conceptual design optimization is performed by resorting to an in-house reduced-order model (ROM), coupled to a genetic algorithm. The fluid dynamic performance and the structural integrity of the optimal design are assessed by means of a hybrid framework, encompassing computational fluid dynamics and ROMs, and by finite element analysis. The results show that it is possible to design a twin-stage compressor for the target application, featuring an average efficiency higher than 70%, a maximum compression ratio exceeding 9, and an operating range of 0.27 at the design rotational speed, despite the detrimental effects of motor cooling and miniature size.
- Open Access
- 11 August 2022
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 6, 181-199
Flow deviation and critical choking in transonic turbine cascades operating with non-ideal compressible flows
In this work we examine the flow deviation and its relationship to critical choking, i.e., choking of the meridional component of velocity, in transonic turbine cascades operating with non-ideal compressible flows. To this purpose, a generalized expression of the corrected flow per unit area as a...
- 11 August 2022
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 6, 181-199
Open AccessFlow deviation and critical choking in transonic turbine cascades operating with non-ideal compressible flows
In this work we examine the flow deviation and its relationship to critical choking, i.e., choking of the meridional component of velocity, in transonic turbine cascades operating with non-ideal compressible flows. To this purpose, a generalized expression of the corrected flow per unit area as a...
- Open Access
NiceProp: An interactive Python-based educational tool for non-ideal compressible fluid dynamics
- Open Access
- 16 July 2021
- Published by ASME International
Design Guidelines for Axial Turbines Operating With Non-Ideal Compressible Flows
Preliminary design methods based on similarity theory. i.e. the Smith’s chart, are a powerful and well-established tool to provide estimate of the size, the shape of the velocity triangles, and the fluid-dynamic performance of gas turbine stages. However, such criteria are arguably not suitable for the design of turbomachines operating with highly complex molecules that exhibit
- 16 July 2021
- Published by ASME International
Open AccessDesign Guidelines for Axial Turbines Operating With Non-Ideal Compressible Flows
Preliminary design methods based on similarity theory. i.e. the Smith’s chart, are a powerful and well-established tool to provide estimate of the size, the shape of the velocity triangles, and the fluid-dynamic performance of gas turbine stages. However, such criteria are arguably not suitable for the design of turbomachines operating with highly complex molecules that exhibit
- Open Access
- 23 December 2020
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 143 (1)
Design Guidelines for Axial Turbines Operating With Non-Ideal Compressible Flows
The impact of non-ideal compressible flows on the fluid-dynamic design of axial turbine stages is examined. First, the classical similarity equation (CSE) is revised and extended to account for the effect of flow non-ideality. Then, the influence of the most relevant design parameters is investigated through the application of a dimensionless turbine stage model embedding a first-principles loss model. The results show that compressibility effects induced by the fluid molecular complexity and the stage volumetric flow ratio produce an offset in the efficiency trends and in the optimal stage layout. Furthermore, flow non-ideality can lead to either an increase or a decrease of stage efficiency up to 3–4% relative to turbines designed to operate in dilute gas state. This effect can be predicted at preliminary design phase through the evaluation of the isentropic pressure–volume exponent. Three-dimensional (3D) RANS simulations of selected test cases corroborate the trends predicted with the reduced-order turbine stage model. URANS computations provide equivalent trends, except for case study niMM1, featuring a non-monotonic variation of the generalized isentropic exponent. For such turbine stage, the efficiency is predicted to be higher than the one computed with any steady-state model based on the control volume approach.
- 23 December 2020
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 143 (1)
Open AccessDesign Guidelines for Axial Turbines Operating With Non-Ideal Compressible Flows
The impact of non-ideal compressible flows on the fluid-dynamic design of axial turbine stages is examined. First, the classical similarity equation (CSE) is revised and extended to account for the effect of flow non-ideality. Then, the influence of the most relevant design parameters is investigated through the application of a dimensionless turbine stage model embedding a first-principles loss model. The results show that compressibility effects induced by the fluid molecular complexity and the stage volumetric flow ratio produce an offset in the efficiency trends and in the optimal stage layout. Furthermore, flow non-ideality can lead to either an increase or a decrease of stage efficiency up to 3–4% relative to turbines designed to operate in dilute gas state. This effect can be predicted at preliminary design phase through the evaluation of the isentropic pressure–volume exponent. Three-dimensional (3D) RANS simulations of selected test cases corroborate the trends predicted with the reduced-order turbine stage model. URANS computations provide equivalent trends, except for case study niMM1, featuring a non-monotonic variation of the generalized isentropic exponent. For such turbine stage, the efficiency is predicted to be higher than the one computed with any steady-state model based on the control volume approach.