The present research work involves the placing of a small quantity of molten steel into the gap among the components to be connected, subsequently positioning them together during solidification. The heat sources utilized in the welding process include the electric arc. The result is a variant of arc welding in which the cost is determined by the flux utilized during the process. The submerged arc welding technique (SAW) technique has been utilized for the rapid process that involves physical, mechanical, and chemical interactions. When the metal arc is shielded, the spatter from the arc is contained by granular fusible material, which safeguards the weld from ambient contamination. Flux plays a major role in SAW welding and welding cost depends upon recycled slag as recycled slag as flux consumption. This flux gets converted into a shielded layer as slag on the weld bead after solidification. The slag from submerged arc welding is thrown away as trash. According to the investigation, this welding is based on factors such as welding current, speed voltage, and stick out depending on the consumption of recycled slag. The box-Behnken-based designed experimental model has been used while RSM has been effectively employed to examine the causation and influence of process elements on responses for optimization. For the model to be deemed significant, its calculated F-ratio must surpass the standard tabulated F-ratio for a specified confidence level (i.e., 95%). In submerged arc welding, the consumption of slag flux escalates with an increase in current and voltage. As welding speed and nozzle-to-plate distance increase, the consumption of slag as flux diminishes. A weighing machine has been utilized to measure the recycled flux consumption before and after each weld bead. Even yet, extensive research has been done on the physical and chemical characteristics of welding fluxes as well as the factors that influence their use.