Kode Jaya Prakash
Research Subjects
Research Interests
Kode Jaya Prakash has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Ramasamy Girimurugan
Department of Mechanical Engineering, Nandha College of Technology, Perundurai, India
2 shared publications - Yeole Shivraj Narayan
Department of Mechanical Engineering, Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering and Technology , Hyderabad , India
2 shared publications - Ajay Vasishth
Department of Physics, University Institute of Sciences, Chandigarh University, Mohali, India
1 shared publication - Akshay Gharat1 shared publication
- Apparao Damarasingu
Aditya Institute of Technology and Management
1 shared publication - Apurba Tiwari
Department of Physics Aligarh Muslim University -202002 Aligarh UP INDIA
1 shared publication
Latest Publications
- Open Access
- 23 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 83-92
Box-Behnken Based Analysis of Slag Consumption in Submerged Arc Welding of High Strength Low Alloy Steel
The present research work involves the placing of a small quantity of molten steel into the gap among the components to be connected, subsequently positioning them together during solidification. The heat sources utilized in the welding process include the electric arc. The result is a variant of arc welding in which the cost is determined by the flux utilized during the process. The submerged arc welding technique (SAW) technique has been utilized for the rapid process that involves physical, mechanical, and chemical interactions. When the metal arc is shielded, the spatter from the arc is contained by granular fusible material, which safeguards the weld from ambient contamination. Flux plays a major role in SAW welding and welding cost depends upon recycled slag as recycled slag as flux consumption. This flux gets converted into a shielded layer as slag on the weld bead after solidification. The slag from submerged arc welding is thrown away as trash. According to the investigation, this welding is based on factors such as welding current, speed voltage, and stick out depending on the consumption of recycled slag. The box-Behnken-based designed experimental model has been used while RSM has been effectively employed to examine the causation and influence of process elements on responses for optimization. For the model to be deemed significant, its calculated F-ratio must surpass the standard tabulated F-ratio for a specified confidence level (i.e., 95%). In submerged arc welding, the consumption of slag flux escalates with an increase in current and voltage. As welding speed and nozzle-to-plate distance increase, the consumption of slag as flux diminishes. A weighing machine has been utilized to measure the recycled flux consumption before and after each weld bead. Even yet, extensive research has been done on the physical and chemical characteristics of welding fluxes as well as the factors that influence their use.
- 23 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 83-92
Open AccessBox-Behnken Based Analysis of Slag Consumption in Submerged Arc Welding of High Strength Low Alloy Steel
The present research work involves the placing of a small quantity of molten steel into the gap among the components to be connected, subsequently positioning them together during solidification. The heat sources utilized in the welding process include the electric arc. The result is a variant of arc welding in which the cost is determined by the flux utilized during the process. The submerged arc welding technique (SAW) technique has been utilized for the rapid process that involves physical, mechanical, and chemical interactions. When the metal arc is shielded, the spatter from the arc is contained by granular fusible material, which safeguards the weld from ambient contamination. Flux plays a major role in SAW welding and welding cost depends upon recycled slag as recycled slag as flux consumption. This flux gets converted into a shielded layer as slag on the weld bead after solidification. The slag from submerged arc welding is thrown away as trash. According to the investigation, this welding is based on factors such as welding current, speed voltage, and stick out depending on the consumption of recycled slag. The box-Behnken-based designed experimental model has been used while RSM has been effectively employed to examine the causation and influence of process elements on responses for optimization. For the model to be deemed significant, its calculated F-ratio must surpass the standard tabulated F-ratio for a specified confidence level (i.e., 95%). In submerged arc welding, the consumption of slag flux escalates with an increase in current and voltage. As welding speed and nozzle-to-plate distance increase, the consumption of slag as flux diminishes. A weighing machine has been utilized to measure the recycled flux consumption before and after each weld bead. Even yet, extensive research has been done on the physical and chemical characteristics of welding fluxes as well as the factors that influence their use.
- 23 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 25-32
Heat Exposure and Its Implications on the Low-Velocity Impact Characteristics of GFRP Laminates
This study investigates how prior heat exposure alters the low velocity impact response of glass fiber reinforced polymer laminates under a constant 16 J impact. Specimens were conditioned at 23.5°C, 50°C, 70°C, and 90°C and then tested. Peak load declined steadily with temperature from 2.040 kN at 23.5°C to 1.535 kN at 50°C to 1.52 kN at 70°C to 1.345 kN at 90°C. Contact duration showed a shallow rise followed by a drop, reported as 8.95 ms at 23.5°C, 9.10 ms at 50°C, 8.45 ms at 70°C, and 8.00 ms at 90°C. Absorbed energy decreased with heat, moving from 15.5 J at 23.5°C to 13.4 J at 50°C to 13.1 J at 70°C to 10.6 J at 90°C. Damage footprints expanded markedly with temperature, with top surface area growing from 152.36 mm2 at 23.5°C to 185.22 mm2 at 50°C to 202.47 mm2 at 70°C to 255.58 mm2 at 90°C, and bottom surface area from 100.24 mm2 to 135.66 mm2 to 155.08 mm2 to 185.09 mm2 over the same temperatures. The combined trends indicate thermally driven matrix softening and viscoelastic effects that reduce load bearing capacity and energy dissipation, shorten the effective contact window, and enlarge subsurface damage. Together these quantitative findings clarify how temperature weakens structural integrity under low velocity impact and provide design relevant guidance for material selection, allowable loads and operational safety margins in components expected to operate in elevated temperature environments, including mobility, aerospace, and energy applications.
- 23 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 25-32
Heat Exposure and Its Implications on the Low-Velocity Impact Characteristics of GFRP Laminates
This study investigates how prior heat exposure alters the low velocity impact response of glass fiber reinforced polymer laminates under a constant 16 J impact. Specimens were conditioned at 23.5°C, 50°C, 70°C, and 90°C and then tested. Peak load declined steadily with temperature from 2.040 kN at 23.5°C to 1.535 kN at 50°C to 1.52 kN at 70°C to 1.345 kN at 90°C. Contact duration showed a shallow rise followed by a drop, reported as 8.95 ms at 23.5°C, 9.10 ms at 50°C, 8.45 ms at 70°C, and 8.00 ms at 90°C. Absorbed energy decreased with heat, moving from 15.5 J at 23.5°C to 13.4 J at 50°C to 13.1 J at 70°C to 10.6 J at 90°C. Damage footprints expanded markedly with temperature, with top surface area growing from 152.36 mm2 at 23.5°C to 185.22 mm2 at 50°C to 202.47 mm2 at 70°C to 255.58 mm2 at 90°C, and bottom surface area from 100.24 mm2 to 135.66 mm2 to 155.08 mm2 to 185.09 mm2 over the same temperatures. The combined trends indicate thermally driven matrix softening and viscoelastic effects that reduce load bearing capacity and energy dissipation, shorten the effective contact window, and enlarge subsurface damage. Together these quantitative findings clarify how temperature weakens structural integrity under low velocity impact and provide design relevant guidance for material selection, allowable loads and operational safety margins in components expected to operate in elevated temperature environments, including mobility, aerospace, and energy applications.
- Open Access
- 17 September 2025
- Published by Elsevier in Nuclear Physics B
- Vol. 1019
Probing phase transitions and microscopic interactions in quasi-topological black holes
- 17 September 2025
- Published by Elsevier in Nuclear Physics B
- Vol. 1019
Open AccessProbing phase transitions and microscopic interactions in quasi-topological black holes
- 28 March 2025
- Published by IGI Global Scientific Publishing
- p. 315-332
Progress in Renewable Energy Technologies
This research paper delves into the rapid progress of energy technologies for renewable sector in the distinctive context. The research analyses the important improvements across diverse sectors of renewable sector like encompassing solar, wind, biomass, hydropower, geothermal, and ocean energy. India's ambitious renewable energy vision and mission, as exemplified by the National Solar Mission and the Green Energy Corridor innovative techniques, have spurred significant growth in the sector. Similarly, it scrutinizes advancements in wind energy, biomass and bioenergy innovations, and the potential of geothermal and ocean energy sources in elaborate. Through previous scenario and an evaluation of the economic and environmental goods, this research gives a comprehensive view on India's renewable energy. It underscores the important role of technological advancement in propelling India's sustainable energy transition and stats the recommendations for policymakers, industry stakeholders, and researchers to further improve the country's renewable energy growth.
- 28 March 2025
- Published by IGI Global Scientific Publishing
- p. 315-332
Progress in Renewable Energy Technologies
This research paper delves into the rapid progress of energy technologies for renewable sector in the distinctive context. The research analyses the important improvements across diverse sectors of renewable sector like encompassing solar, wind, biomass, hydropower, geothermal, and ocean energy. India's ambitious renewable energy vision and mission, as exemplified by the National Solar Mission and the Green Energy Corridor innovative techniques, have spurred significant growth in the sector. Similarly, it scrutinizes advancements in wind energy, biomass and bioenergy innovations, and the potential of geothermal and ocean energy sources in elaborate. Through previous scenario and an evaluation of the economic and environmental goods, this research gives a comprehensive view on India's renewable energy. It underscores the important role of technological advancement in propelling India's sustainable energy transition and stats the recommendations for policymakers, industry stakeholders, and researchers to further improve the country's renewable energy growth.
- Open Access
- 16 December 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 69  (4) , 1585-1591
Orientation Influence on Tensile Strain Hardening in Forged Plates of AA2014 Aluminium Alloy
Strain hardening is an effective strengthening method for alloys that requires plastic deformation of the material during manufacturing. The strength will significantly increase due to the number of dislocations formed during plastic flow of material. This study examines the plastic flow activity of forged plates of an AA2014 aluminium alloy with tensile test conditions. The effects of solution treatment and artificial ageing on strain hardening characteristics and tensile behaviour were investigated using tensile testing and scanning electron microscopy. Hollomon plastic flow relationship was employed for solution treated and age hardening conditions by experimental engineering stress- engineering strain data of the aluminium alloy AA2014. In both solution-treated and age-hardened conditions, the alloy displays three distinct strain hardening rate levels. The highest rate of strain hardening occurs both in solution-treated and age hardening conditions in regions with lower strain. It is also noted that specimens experience higher and lower strain hardening rates in the forging direction (Longitudinal, L) and perpendicular to the forging direction (Transverse, T) respectively in both solution-treated and age hardening conditions. In order to bring out the degree of in-plane anisotropy, test are conducted in L, L+45° (45° to L direction) and T in the plane of forging. Lower and higher magnification SEM images of the alloy under study, clearly exhibited that the ductile dimple fracture associated with a lower shear fracture contributions.
- 16 December 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 69  (4) , 1585-1591
Open AccessOrientation Influence on Tensile Strain Hardening in Forged Plates of AA2014 Aluminium Alloy
Strain hardening is an effective strengthening method for alloys that requires plastic deformation of the material during manufacturing. The strength will significantly increase due to the number of dislocations formed during plastic flow of material. This study examines the plastic flow activity of forged plates of an AA2014 aluminium alloy with tensile test conditions. The effects of solution treatment and artificial ageing on strain hardening characteristics and tensile behaviour were investigated using tensile testing and scanning electron microscopy. Hollomon plastic flow relationship was employed for solution treated and age hardening conditions by experimental engineering stress- engineering strain data of the aluminium alloy AA2014. In both solution-treated and age-hardened conditions, the alloy displays three distinct strain hardening rate levels. The highest rate of strain hardening occurs both in solution-treated and age hardening conditions in regions with lower strain. It is also noted that specimens experience higher and lower strain hardening rates in the forging direction (Longitudinal, L) and perpendicular to the forging direction (Transverse, T) respectively in both solution-treated and age hardening conditions. In order to bring out the degree of in-plane anisotropy, test are conducted in L, L+45° (45° to L direction) and T in the plane of forging. Lower and higher magnification SEM images of the alloy under study, clearly exhibited that the ductile dimple fracture associated with a lower shear fracture contributions.
- 24 July 2024
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 101  (10)
Theoretical investigation on electronic, optical and phonon properties of compound semiconductors suitable for photovoltaic device applications
- 24 July 2024
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 101  (10)
Theoretical investigation on electronic, optical and phonon properties of compound semiconductors suitable for photovoltaic device applications
- 15 March 2024
- Published by IGI Global Scientific Publishing
- p. 195-219
AI-IoT-Enabled Biomass-to-Biofuel Conversion
The integration of AI and IoT is revolutionizing the energy sector by improving efficiency and minimizing downtime in power plants. IoT sensors and smart grid technologies enhance transmission efficiency by real-time monitoring and power flow optimization. However, challenges like initial investment costs and skill requirements persist. Ethical considerations, data privacy, and equitable access are crucial for fully harnessing the potential of AI and IoT in the energy sector. This chapter synthesizes successful case studies, lessons learned, and future trends, emphasizing the pivotal role of AI and IoT in fostering innovation, optimizing energy systems, and driving the industry towards a cleaner, more sustainable energy landscape.
- 15 March 2024
- Published by IGI Global Scientific Publishing
- p. 195-219
AI-IoT-Enabled Biomass-to-Biofuel Conversion
The integration of AI and IoT is revolutionizing the energy sector by improving efficiency and minimizing downtime in power plants. IoT sensors and smart grid technologies enhance transmission efficiency by real-time monitoring and power flow optimization. However, challenges like initial investment costs and skill requirements persist. Ethical considerations, data privacy, and equitable access are crucial for fully harnessing the potential of AI and IoT in the energy sector. This chapter synthesizes successful case studies, lessons learned, and future trends, emphasizing the pivotal role of AI and IoT in fostering innovation, optimizing energy systems, and driving the industry towards a cleaner, more sustainable energy landscape.
- Open Access
- 28 December 2023
- Published by Open Exploration Publishing in Exploration of Medicine
- Vol. 4  (6) , 1033-1047
Development of patient-specific 3D printed implants for total knee arthroplasty
Aim: Arthritis is a degenerative condition characterized by the progressive deterioration of the knee joint, leading to aches, rigidity, and decreased mobility. Total knee arthroplasty (TKA) surgery is performed to alleviate pain for restoring activity in these patients. TKA is carried out due to natural wear of the cartilage and meniscus or by sudden impact at the knee joint area. The surgical procedure involves careful planning, precise bone cuts, and insertion of artificial components made of metal alloys and high-density polyethylene. However, conventional manufacturing of customized knee implants involves time and cost. This work aims to present the application of three-dimensional (3D) printing for developing individualized knee implants for TKA and the challenges faced during it. Methods: Morphometry of the knee joint varies among different populations, including Indian and Western, which pose challenges during the surgery as accurate alignment and implant sizing are crucial for optimal outcomes. A female patient’s pre-surgery computed tomography (CT) scan is considered to identify the disease and to find region of interest (ROI) such as knee joint. Process involves converting scanned data to a file format for 3D printing via computer-aided design (CAD). Results: The patient’s CT scan data is processed to obtain the CAD models of knee joint and standard triangulation language (STL) file. Additional geometries and noise present near the region are removed to get ROI. Open loops and overlapping triangles are rectified in the STL file. Based on the morphometry of the bone, resection is done to obtain the CAD models of knee implants. 3D printing of the knee joint and implant prototypes is then obtained using fused deposition modelling (FDM). Line layers on the printed implant prototype are seen. Conclusions: Patient-specific 3D printed knee joint implant prototypes are successfully obtained using FDM. Challenges faced during the work are successfully worked out.
- 28 December 2023
- Published by Open Exploration Publishing in Exploration of Medicine
- Vol. 4  (6) , 1033-1047
Open AccessDevelopment of patient-specific 3D printed implants for total knee arthroplasty
Aim: Arthritis is a degenerative condition characterized by the progressive deterioration of the knee joint, leading to aches, rigidity, and decreased mobility. Total knee arthroplasty (TKA) surgery is performed to alleviate pain for restoring activity in these patients. TKA is carried out due to natural wear of the cartilage and meniscus or by sudden impact at the knee joint area. The surgical procedure involves careful planning, precise bone cuts, and insertion of artificial components made of metal alloys and high-density polyethylene. However, conventional manufacturing of customized knee implants involves time and cost. This work aims to present the application of three-dimensional (3D) printing for developing individualized knee implants for TKA and the challenges faced during it. Methods: Morphometry of the knee joint varies among different populations, including Indian and Western, which pose challenges during the surgery as accurate alignment and implant sizing are crucial for optimal outcomes. A female patient’s pre-surgery computed tomography (CT) scan is considered to identify the disease and to find region of interest (ROI) such as knee joint. Process involves converting scanned data to a file format for 3D printing via computer-aided design (CAD). Results: The patient’s CT scan data is processed to obtain the CAD models of knee joint and standard triangulation language (STL) file. Additional geometries and noise present near the region are removed to get ROI. Open loops and overlapping triangles are rectified in the STL file. Based on the morphometry of the bone, resection is done to obtain the CAD models of knee implants. 3D printing of the knee joint and implant prototypes is then obtained using fused deposition modelling (FDM). Line layers on the printed implant prototype are seen. Conclusions: Patient-specific 3D printed knee joint implant prototypes are successfully obtained using FDM. Challenges faced during the work are successfully worked out.
- Open Access
- 5 December 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 455, 02004
Evaluating the influence of coir fibres on solar still efficiency and economic viability
The primary objective of this study is to determine the Coir fibres (CF) utilization in solar stills (SS) to boost the quantity of freshwater production. By placing dry CF fibres in the absorber basin, researchers were able to accelerate the rate at which water evaporated from the SS. Under various CF densities, the freshwater production of the absorber basin was measured (8, 11, 14, 18, 20, 23, and 26). The outcomes demonstrated that yield was raised by 27.23 percent after 18-fiber SSCF was added to the absorber basin. There were 14.27 percent, 19.40 percent, 24.57 percent, 25.00 percent, 16.28 percent, and 6.23 percent yield improvements for solar stills with 8, 11, 14, 18, 20, 23, and 26 fibres in the absorber basin, respectively, as compared to a CSS. The results demonstrate that compared to CSS, the cost to produce one litre of freshwater with SSCF is reduced by 23.1%. The return of investment for SSCF is much more immediate than it is for CSS. An estimated ₹242 was needed to produce 1 litre of freshwater using CSS, while an estimated ₹199 was needed to produce 1 litre of freshwater using SSCF. The payback time for SS was only 6.23 months, which was significantly less than that of solar panels. CF are preferable to other materials for use in the solar still due to their lower cost and higher energy efficiency.
- 5 December 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 455, 02004
Open AccessEvaluating the influence of coir fibres on solar still efficiency and economic viability
The primary objective of this study is to determine the Coir fibres (CF) utilization in solar stills (SS) to boost the quantity of freshwater production. By placing dry CF fibres in the absorber basin, researchers were able to accelerate the rate at which water evaporated from the SS. Under various CF densities, the freshwater production of the absorber basin was measured (8, 11, 14, 18, 20, 23, and 26). The outcomes demonstrated that yield was raised by 27.23 percent after 18-fiber SSCF was added to the absorber basin. There were 14.27 percent, 19.40 percent, 24.57 percent, 25.00 percent, 16.28 percent, and 6.23 percent yield improvements for solar stills with 8, 11, 14, 18, 20, 23, and 26 fibres in the absorber basin, respectively, as compared to a CSS. The results demonstrate that compared to CSS, the cost to produce one litre of freshwater with SSCF is reduced by 23.1%. The return of investment for SSCF is much more immediate than it is for CSS. An estimated ₹242 was needed to produce 1 litre of freshwater using CSS, while an estimated ₹199 was needed to produce 1 litre of freshwater using SSCF. The payback time for SS was only 6.23 months, which was significantly less than that of solar panels. CF are preferable to other materials for use in the solar still due to their lower cost and higher energy efficiency.
- 30 June 2023
- Published by IGI Global Scientific Publishing
- p. 184-210
Applications of Nano-Fluids in the Various Engineering Fields
In this chapter, nano-fluids are a type of fluid with suspended nano-sized particles that are useful in various fields, such as manufacturing, medical, 3D printing, tissue engineering, and fluid effects. Nano-fluids can be used as coolants and lubricants to improve machining accuracy and reduce tool wear, as well as additives in coatings and adhesives. Nano-fluids can be used as printing inks to create intricate and precise structures and enhance their properties. Nano-fluids can improve drug delivery and enhance visibility of tissues and organs. Nano-fluids are manufactured using two-phase and one-phase methods, involving the dispersion of nanoparticles in a base fluid. Request access from your librarian to read this chapter's full text.
- 30 June 2023
- Published by IGI Global Scientific Publishing
- p. 184-210
Applications of Nano-Fluids in the Various Engineering Fields
In this chapter, nano-fluids are a type of fluid with suspended nano-sized particles that are useful in various fields, such as manufacturing, medical, 3D printing, tissue engineering, and fluid effects. Nano-fluids can be used as coolants and lubricants to improve machining accuracy and reduce tool wear, as well as additives in coatings and adhesives. Nano-fluids can be used as printing inks to create intricate and precise structures and enhance their properties. Nano-fluids can improve drug delivery and enhance visibility of tissues and organs. Nano-fluids are manufactured using two-phase and one-phase methods, involving the dispersion of nanoparticles in a base fluid. Request access from your librarian to read this chapter's full text.