Synergistic Effect on Mechanical Properties of Glass Fiber Reinforced Epoxy Composites by Simultaneous Interfacial Modification Using Graphene Oxide and Matrix Modification With Multiwalled Carbon Nanotubes
- 6 September 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 47 (4) , 3638-3651
Abstract
A novel hierarchical epoxy/glass fiber (GF) composite was developed through a dual‐modification strategy combining interfacial modification using graphene oxide (GO) and matrix reinforcement with multiwalled carbon nanotubes (MWCNTs). GO nanoparticles were grafted onto oxidized GFs via a one‐step dip coating process utilizing a silanization technique, while 0.5 wt% MWCNTs were uniformly dispersed within the epoxy matrix. The resulting GO‐functionalized GFs and MWCNT‐reinforced epoxy matrix were integrated using a conventional hand layup technique. This simultaneous interfacial and matrix modification led to a significant improvement in the composite's mechanical properties. The optimized epoxy/GF‐GO/MWCNTs composites exhibited a maximum tensile strength of 176 MPa, flexural strength of 281 MPa, and mode‐II fracture toughness of 1.684 N/mm, outperforming the baseline epoxy/GF composites, which showed values of 107 MPa, 198 MPa, and 1.267 N/mm, respectively. The enhanced performance is attributed to the synergistic interaction between the improved fiber–matrix interfacial bonding and the effective stress transfer enabled by the MWCNTs within the epoxy matrix. These results demonstrate the potential of this integrated modification approach in developing high‐performance structural composites with superior mechanical and in‐plane shear properties.Keywords
This publication has 48 references indexed in Scilit:
- The Synergistic Effect of Graphene Oxide in Epoxy Resin on Photocured Coating Films with Anticorrosion and Antibacterial PropertiesMacromolecular Rapid Communications, 2024
- Investigation on the effect of multiwalled carbon nanotubes in carbon fiber‐reinforced epoxy composites manufactured using vacuum infusion process and hand layup process followed by vacuum baggingPolymer Composites, 2023
- Post‐curing and fiber hybridization effects on mode‐II interlaminar fracture toughness of glass/carbon/epoxy compositesPolymer Composites, 2023
- Mode I and II interlaminar fracture toughness of glass/carbon inter‐ply hybrid FRP composites: Effects of stacking sequence and testing temperaturePolymer Composites, 2023
- A study on graphene reinforced carbon fiber epoxy composites: Investigation of electrical, flexural, and dynamic mechanical propertiesPolymer Composites, 2022
- A comparative study on dry‐sliding wear behavior of graphene oxide/epoxy nanocomposites functionalized by amino‐ and epoxy‐silane coupling agentsPolymer Composites, 2021
- Effects of carbon nanotube/polymer interfacial bonding on the long‐term creep performance of nanophased glass fiber/epoxy compositesPolymer Composites, 2019
- Improving the interfacial properties of carbon fiber–epoxy resin composites with a graphene‐modified sizing agentJournal of Applied Polymer Science, 2018
- Mode I and Mode II interlaminar fracture behavior of E‐glass fiber reinforced epoxy composites modified with reduced exfoliated graphite oxidePolymer Composites, 2018
- Synthesis and characterization of emulsion‐type curing agent of water‐borne epoxy resinJournal of Applied Polymer Science, 2013