AVArun Sam Varghese

Arun Sam Varghese

*This is an algorithmically generated author record based on publicly available information.

Arun Sam Varghese has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Solvent‐Assisted Dispersion of Multiwalled Carbon Nanotubes in Epoxy‐Based Glass Fiber‐Reinforced Polymer Composites: Experimental Investigation, Micromechanical Modeling, and Machine Learning Prediction

    by Jerrin Joy Varughese, Lince Mathew Thomas, Arun Sam Varghese, Dinah Ann Varughese, Kakarla Dilleswara Rao, Shyam Sundar M. N. V. Manikanta, Varshith Pedireddi, M. S. Sreekanth

    The investigation examines the improvement of mechanical behavior of epoxy and glass fiber (GF)‐reinforced nanocomposites containing multiwalled carbon nanotubes (MWCNT) with weight fractions of 0.25, 0.50, and 0.75 respectively using ultrasonication‐assisted dispersion in organic solvents namely, ethanol and dimethyl ketone. A systematic approach to solvent‐mediated dispersion was investigated and assessed its impact on macro‐scale mechanical response, interfacial interaction, and microstructural morphology. Epoxy nanocomposite with 0.5 wt.% ethanol‐dispersed MWCNT demonstrated a notable 23% increase in ultimate tensile strength (48 MPa), as compared to pure epoxy. In MWCNT/glass fiber‐reinforced polymer (GFRP) nanocomposite, 0.5 wt.% MWCNT improves the Young's modulus by 5.3%, whereas 0.25 wt.% MWCNT results in a significant 48.54% increase in flexural strength (339.4 MPa) and a remarkable 142.22% rise in maximum flexural extension (15.26 mm) as compared to pristine GFRP. The Halpin–Tsai micromechanical model and the Mori–Tanaka mean field homogenization approach are used to provide a mechanistic basis for the experimental observations. This allows for a quantitative evaluation of the impact of filler aspect ratio, volume fraction, and orientation on composite elastic response. Agglomeration effects and solvent residuals phenomena are quantitatively modeled using an agglomeration efficiency parameter, and the empirically obtained moduli are contextualized against Halpin–Tsai predictions. Moreover, machine learning models accurately predict mechanical characteristics, demonstrating R 2 values ranging from 0.976 to 0.983. This research establishes a dual analytical‐predictive framework with high translational potential for advanced structural applications.

  • Investigation on the effect of fibre modifications with nanoparticles on solid particle erosion wear response of advanced epoxy - carbon fibre composites

    by Arun Sam Varghese, Lince Mathew Thomas, Jerrin Joy Varughese, Abhishek S, Daniel Biju Thomas, Jacob Michael T. B., Adith Murali, Regina Antony, Divya Manav, Kinjol Sen, et al.


  • Molybdenum Disulfide‐Functionalized Multiwalled Carbon Nanotubes Based Epoxy Coating on Epoxy/Carbon Fiber Laminates for Improved Erosion Resistance

    by Arun Sam Varghese, Lince Mathew Thomas, Jerrin Joy Varughese, S. Abhishek, Daniel Biju Thomas, T. B. Jacob Michael, Adith Murali, M. S. Sreekanth

    The investigation evaluates the erosion behavior of carbon fiber (CF) reinforced epoxy laminates, protected with an epoxy‐based coating system incorporating synthesized molybdenum disulfide (MoS 2 ) functionalized multiwalled carbon nanotubes (MWCNTs) hybrid nanoparticles. The nanocomposite coating with 0.5 wt% MoS 2 ‐MWCNTs hybrid demonstrated a superior resistance to severe erosive wear conditions and exhibited clear deviation in erosion response as compared to conventional epoxy/CF composites. The epoxy hybrid nanocomposite coated epoxy/CF laminates displayed a semi‐ductile erosion characteristic, with a maximum erosion rate of 1132 mg/kg, occurring at a 30° impact angle, and the minimum erosion rate of 600 mg/kg occurring at a 90° impact angle. Morphological analysis of the eroded surface by FESEM revealed that micro‐plowing and micro‐cutting mechanisms were predominant at the hybrid nanocomposite coated regions, whereas fiber cutting mechanisms were primarily observed in the epoxy/CF laminates.


  • Synergistic Enhancement of Mechanical and Interfacial Properties in Carbon Fiber Epoxy Nanocomposites via Dual Functionalization of Fiber and Exfoliated Hexagonal Boron Nitride Nanosheets

    by Jerrin Joy Varughese, Lince Mathew Thomas, Arun Sam Varghese, Dinah Ann Varughese, T. P. Sumangala, M. S. Sreekanth

    A dual interfacial engineering strategy is proposed to enhance the mechanical and interlaminar performance of carbon fiber (CF)‐reinforced epoxy (EP) nanocomposites by simultaneously silanizing CF and exfoliated hexagonal boron nitride nanosheets (hBNNs). Sodium hydroxide assisted hydroxylation, followed by 3‐aminopropyltriethoxysilane (APTES) functionalization, enabled covalent integration at the fiber–matrix and filler–matrix interfaces. XPS analysis confirmed the formation of SiOSi and SiOB linkages on APTES functionalized hBNNs, establishing a chemically interconnected interface. Wettability improved significantly, with the contact angle reducing from 85.48° for untreated CF to 74.46° after salinization of CF. The dual‐functionalized epoxy composite exhibited a tensile strength of 409 ± 9 MPa and modulus of 32.05 ± 2 GPa, corresponding to enhancements of 22% and 67.45%, respectively, over pristine CF/EP. Flexural strength increased from 492 ± 6 MPa to 537 ± 11 MPa, while interlaminar shear strength improved from 37.08 ± 0.06 to 43.50 ± 0.04 MPa, demonstrating superior resistance to shear‐driven failure. Fiber volume fraction was consistently maintained within 41% with void content less than 5%, confirming that the performance gains arise from interfacial engineering. The chemically integrated hybrid network induces constrained interphase regions and cooperative stress‐transfer pathways in the polymer matrix, generating a positive synergistic effect beyond additive reinforcement behavior.


  • Open Access

    Epoxy vitrimer based nanocomposites for EMI shielding: Integrating reprocessability, self-healing, and machine learning predictions

    by Lince Mathew Thomas, Sampath Parasuram, Arun Sam Varghese, Jerrin Joy Varughese, Manobalan S․, Suryasarathi Bose, Sumangala T․ P․, Sreekanth M․ S․


  • Synergistic Effect on Mechanical Properties of Glass Fiber Reinforced Epoxy Composites by Simultaneous Interfacial Modification Using Graphene Oxide and Matrix Modification With Multiwalled Carbon Nanotubes

    by Arun Sam Varghese, Sreekanth Meledath Sadanandan, Lince Mathew Thomas

    A novel hierarchical epoxy/glass fiber (GF) composite was developed through a dual‐modification strategy combining interfacial modification using graphene oxide (GO) and matrix reinforcement with multiwalled carbon nanotubes (MWCNTs). GO nanoparticles were grafted onto oxidized GFs via a one‐step dip coating process utilizing a silanization technique, while 0.5 wt% MWCNTs were uniformly dispersed within the epoxy matrix. The resulting GO‐functionalized GFs and MWCNT‐reinforced epoxy matrix were integrated using a conventional hand layup technique. This simultaneous interfacial and matrix modification led to a significant improvement in the composite's mechanical properties. The optimized epoxy/GF‐GO/MWCNTs composites exhibited a maximum tensile strength of 176 MPa, flexural strength of 281 MPa, and mode‐II fracture toughness of 1.684 N/mm, outperforming the baseline epoxy/GF composites, which showed values of 107 MPa, 198 MPa, and 1.267 N/mm, respectively. The enhanced performance is attributed to the synergistic interaction between the improved fiber–matrix interfacial bonding and the effective stress transfer enabled by the MWCNTs within the epoxy matrix. These results demonstrate the potential of this integrated modification approach in developing high‐performance structural composites with superior mechanical and in‐plane shear properties.


  • Investigation on the effect of multiwalled carbon nanotubes in carbon fiber‐reinforced epoxy composites manufactured using vacuum infusion process and hand layup process followed by vacuum bagging

    by Arun Sam Varghese, Sreekanth M. S.

    Epoxy/carbon fiber (CF) composites are widely used for structural applications owing to their exceptional mechanical and physical characteristics. The main aim of this work is to individually analyze the impact of multiwalled carbon nanotubes (MWCNTs) as nanofillers in epoxy/MWCNTs/CF composites prepared by vacuum infusion process (VIP) and hand layup followed by vacuum bagging technique (HLVB). Optimal Manufacturing Strategies were followed at various stages of manufacturing which include the selection of effective dispersion technique for MWCNTs, identification of optimal weight percentage of MWCNTs in epoxy/MWCNTs nanocomposites and preparation of epoxy/MWCNTs/CF composites. For HLVB samples, tensile and flexural strengths increased from 337.5 to 475 MPa and 615.40 to 677.09 MPa. For VIP samples tensile and flexural strengths increased from 371 to 521 MPa and 714.19 to 769.02 MPa. Thermogravimetric analysis (TGA) indicated improvement in the thermal stability of epoxy with the incorporation of MWCNTs/CF and improved weight percentage retention of 84.7% at 375°C. Fracture analysis of the epoxy/MWCNTs/CF composites prepared using VIP were analyzed by FE‐SEM and revealed that constant fiber rupture caused by better interface and improved bridging mechanism eventually led to enhanced mechanical performance. The predominant immediate fracture mechanism of MWCNTs also indicated this improved interfacial interaction.Highlights: Pull‐out fracture mechanism was predominantly seen in high viscous epoxy/MWCNTs composites Immediate fracture mechanism of MWCNTs were predominant in low viscous epoxy/MWCNTs sample Constant fiber rupture of VIP samples indicated improved fiber matrix interface Incorporation of MWCNTs showed improved weight percentage retention 0.5 wt% MWCNTs incorporated VIP epoxy/CF composites showed improved performance