Design and experiment of high load-bearing acrylic connection node for the world's largest acrylic spherical vessel
Open Access
- 1 June 2023
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (6) , 065303
Abstract
Acrylic is a kind of polymer material and is gradually applied to load-bearing components. The working stress and ultimate bearing capacity of the acrylic structure are the main design indexes. Aiming at the world’s largest acrylic spherical vessel, the structural design, finite element analysis and full-size prototype tensile test of a new acrylic connection node were carried out in this paper. This acrylic node will bear 90 kN tension force for 20 years. According to the viscoelastic characteristics of the material and the working environment, the stress of acrylic should be controlled below 3.5 MPa for long term used. At the time, the ultimate bearing capacity should be greater than 6 times the working load. According to the stress-strain curve of acrylic, its tensile strength is about 75 MPa. There is no obvious plastic deformation after fracture, showing the material characteristics of brittle fracture. According to the failure analysis of previous acrylic node structures and the characteristics of acrylic, the new acrylic node structure is proposed in this paper. Its performance is improved by reducing the cutting amount of acrylic nodes, optimizing the structure of embedded part and avoiding sharp corners. A 1/4 symmetrical acrylic node model is established FEA software, and the nonlinear problems such as material nonlinearity and friction contact are solved by finite element method. The FEA results show that the maximum principal stress of the node is about 2.92 MPa. The relative error between the FEA results and the experimental results is 7.24%, indicating that the FEA results are credible. The ultimate tensile load of the node can reach 1000 kN, which is about 11 times the working load. The failure of the node occurs at a sharp corner of the groove, instead of the maximum stress point. Therefore, stress concentration caused by sharp corners should be avoided in the design of acrylic structure.Keywords
Funding Information
- Strategic Priority Research Program of the Chinese Academy of Sciences (XDA10010200)
- Youth Innovation Promotion Association of the Chinese Academy of Sciences (292020000087)
This publication has 15 references indexed in Scilit:
- Design and construction of the DEAP-3600 dark matter detectorAstroparticle Physics, 2019
- Flexural creep tests and long-term mechanical behavior of fiber-reinforced polymeric composite tubesComposite Structures, 2018
- Creep behavior and lifetime prediction of PMMA immersed in liquid scintillatorPolymer Testing, 2016
- The 750 GeV diphoton excess, dark matter and constraints from the IceCube experimentJournal of High Energy Physics, 2016
- An overview of the Daya Bay reactor neutrino experimentNuclear Physics B, 2016
- Neutrino physics with JUNOJournal of Physics G: Nuclear and Particle Physics, 2016
- Application of an acrylic vessel supported by a stainless-steel truss for the JUNO central detectorScience China Technological Sciences, 2014
- Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive modelComposite Structures, 2014
- Microwave initiated synthesis of polymethylmethacrylate grafted guar (GG-g-PMMA), characterizations and applicationsInternational Journal of Biological Macromolecules, 2011
- Application of time–stress superposition to nonlinear creep of polyamide 66 filled with nanoparticles of various sizesComposites Science and Technology, 2007