Numerical model of thermo-mechanical coupling for the tensile failure process of brittle materials
Authors:
Open Access
- 1 October 2017
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 7 (10)
Abstract
A numerical model of thermal cracking with a thermo-mechanical coupling effect was established. The theory of tensile failure and heat conduction is used to study the tensile failure process of brittle materials, such as rock and concrete under high temperature environment. The validity of the model is verified by thick-wall cylinders with analytical solutions. The failure modes of brittle materials under thermal stresses caused by temperature gradient and different thermal expansion coefficient were studied by using a thick-wall cylinder model and an embedded particle model, respectively. In the thick-wall cylinder model, different forms of cracks induced by temperature gradient were obtained under different temperature boundary conditions. In the embedded particle model, radial cracks were produced in the medium part with lower tensile strength when temperature increased because of the different thermal expansion coefficient. Model results are in good agreement with the experimental results, thereby providing a new finite element method for analyzing the thermal damage process and mechanism of brittle materials.Keywords
Funding Information
- National Key Research and Development Program of China (2016YFC0801600)
- National Natural Science Foundation of China (41372301, 51534003)
This publication has 23 references indexed in Scilit:
- Thermal stress FEM analysis of rock with microwave energyInternational Journal of Mineral Processing, 2014
- Particle simulation of thermally-induced rock damage with consideration of temperature-dependent elastic modulus and strengthComputers and Geotechnics, 2014
- A Column Experiment to Study the Thermo-Hydro-Mechanical Behaviour of Expansive SoilsRock Mechanics and Rock Engineering, 2013
- MLPG approximation to the p-Laplace problemComputational Mechanics, 2010
- SEMin situinvestigation on thermal cracking behaviour of Pingdingshan sandstone at elevated temperaturesGeophysical Journal International, 2010
- Bonded-particle modeling of thermally fractured graniteInternational Journal of Rock Mechanics and Mining Sciences, 2008
- Concrete cover requirements for FRP reinforced members in hot climatesComposite Structures, 2006
- Thermal Degradation of Heterogeneous Concrete MaterialsJournal of Materials in Civil Engineering, 2005
- Effect of Temperature on Thermal Properties of High-Strength ConcreteJournal of Materials in Civil Engineering, 2003
- A study of the crack network in thermally and mechanically cracked granite samples using confocal scanning laser microscopyPhysics and Chemistry of the Earth, Part A: Solid Earth and Geodesy, 1999