Agricultural Wastes Derived Activated Carbon for the Removal of Iron from Car-Wash Wastewater
Open Access
- 1 March 2025
- journal article
- Published by Walter de Gruyter GmbH in Ecological Chemistry and Engineering S
- Vol. 32 (1) , 85-98
Abstract
Over the past few decades, car-washing centres have increased due to the increase in the number of vehicles. Car-wash effluents are highly polluted with non-biodegradable, toxic, and carcinogenic heavy metals, including iron, lead, chrome, cadmium, and zinc. The focus in this study is on iron removal from car-wash wastewater due to its toxicity to the food chain, health, and environment. In comparison with the costly wastewater treatment technologies, adsorption is a widespread, simple, and cheap method that has been applied for the metal removal from car-wash wastewater. Since the conversion of agricultural waste into valuable sorbents is a renewable and eco-friendly approach, activated carbon was used in this research to assess iron removal performance from car-wash wastewater applying the adsorption technique. The impact of the following parameters: contact time (0 min to 120 min), iron concentration (8 mg/L to 14 mg/L), dose of adsorbent (0.2 g to 1 g per 25 mL wastewater), and pH (4 to 10) on the adsorption efficiency of activated carbon was studied. Fe was efficiently removed (98 %) at the optimum values of contact time 120 min, concentration 12 mg/L, dose 1 g, and pH 8, respectively. The investigated parameters (particularly dose of adsorbent and pH) need to be studied in a broader range as they did not show a potential difference in terms of iron removal efficiencies. Turbidity, TDS, and TSS were removed from car-wash wastewater after 2 hours of contact time, with removal efficiencies of 88 %, 75 %, and 55 % respectively. Effluent characteristics of car-wash stations are usually variable due to the differences in the amount of dirt from vehicles, size and number of washed vehicles, and type of used detergents.Keywords
This publication has 29 references indexed in Scilit:
- Application of adsorption process for effective removal of emerging contaminants from water and wastewaterEnvironmental Pollution, 2021
- Removal of Persistent Organic Pollutants (POPs) from water and wastewater by adsorption and electrocoagulation processGroundwater for Sustainable Development, 2021
- Automotive Wash Effluent Treatment Using Combined Process of Coagulation/Flocculation/Sedimentation–AdsorptionWater, Air, & Soil Pollution, 2020
- Reuse of car wash wastewater by chemical coagulation and membrane bioreactor treatment processesInternational Biodeterioration & Biodegradation, 2016
- Optimization of parameters for competitive adsorption of heavy metal ions (Pb+2, Ni+2, Cd+2) onto activated carbonKorean Journal of Chemical Engineering, 2014
- Comparison of activated carbon prepared from olive stones by microwave and conventional heating for iron (II), lead (II), and copper (II) removal from synthetic wastewaterEnvironmental Progress & Sustainable Energy, 2013
- Removal of lead (II) and copper (II) from aqueous solution using pomegranate peel as a new adsorbentDesalination, 2008
- A simulation study of the removal efficiency of granular activated carbon on cadmium and leadDesalination, 2007
- Pb(II) uptake by kaolinite and montmorillonite in aqueous medium: Influence of acid activation of the claysColloids and Surfaces A: Physicochemical and Engineering Aspects, 2006
- Removal of Cr(VI) from aqueous solutions by adsorption onto hazelnut shell activated carbon: kinetic and equilibrium studiesBioresource Technology, 2004