An exploration of the solution of direct methanol fuel cell cost effectiveness
Open Access
- 8 August 2024
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 12, 1434996
Abstract
The work in this paper incorporated printed circuit board (PCB) technology into micro-direct methanol fuel cells (µDMFCs) and conjectured and verified the performance degradation factors of PCB current collectors in µDMFCs by testing different designed configuration µDMFCs. The experiment results showed that all kinds of PCB coating can benefit from the porous stainless-steel plates covering to a great extent. At the end of 48 h discharging, µDMFCs with porous stainless-steel plates between MEA and PCB coating achieved higher performance than those of the direct contacting series. It can be inferred from various types of experimental data that because of stainless-steel porous plate isolating, the impact of corrosion on the surface of the PCB electrode plate was reduced to a certain extent. The corrosion of the electrode plate was slowed down in the µDMFC discharging as a result of the passivation behavior on the iron surface and a decrease in corrosion current. Consequently, the attenuation of the PCB performance was delayed. The conclusion of this work explores a practical direction to enhance the cost-effectiveness of fuel cells, promoting the large-scale application of DMFCs in the future.Keywords
This publication has 23 references indexed in Scilit:
- An improved strategy of passive micro direct methanol fuel cell: Mass transport mechanism optimization dominated by a single hydrophilic layerEnergy, 2023
- Insightful understanding of three-phase interface behaviors in 1T-2H MoS2/CFP electrode for hydrogen evolution improvementChinese Chemical Letters, 2022
- Structure optimization of cathode microporous layer for direct methanol fuel cellsApplied Energy, 2015
- Performance of air-breathing direct methanol fuel cell with Au-coated aluminum current collectorsInternational Journal of Hydrogen Energy, 2012
- Investigation of the Ring Area Formed Around Cavitation Erosion Pits on the Surface of Carbon SteelTribology Letters, 2011
- Passive direct methanol fuel cells for portable electronic devicesApplied Energy, 2011
- A study on the overall efficiency of direct methanol fuel cell by methanol crossover currentApplied Energy, 2010
- Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devicesInternational Journal of Hydrogen Energy, 2009
- Origin of Surface Defects in PCB Final Finishes by the Electroless Nickel Immersion Gold ProcessJournal of Electronic Materials, 2008
- DMFCs: From Fundamental Aspects to Technology DevelopmentFuel Cells, 2001