XWXinsheng Wang

Xinsheng Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xinsheng Wang has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Wireless Clock Synchronization Convergence Algorithm Based on The Phase-Locked loop Principle

    by Xinsheng Wang, Zhenyu . Ma, Wencong Fan, Xiyue Wang

    Clock synchronization is a fundamental service for information and communication systems and is widely required in particle physics experiments, unmanned aerial vehicle (UAV) swarms, and modern vehicle systems. To address the demand for high-precision and low-cost clock synchronization in large-scale wireless sensor arrays, this study proposes a wireless clock synchronization scheme based on phase-locked loop (PLL) principles to achieve frequency and phase locking between master and slave clocks. A fuzzy control algorithm is introduced to accelerate synchronization convergence. Simulation results show that the proposed algorithm improves the convergence rate by 20% compared with the conventional proportional-integral (PI) control algorithm, and significantly improves the overshoot behavior. Using ultra-wideband (UWB) as the communication carrier, the MCU is responsible for control scheduling, while the FPGA performs phase measurement, filtering, and clock-control-related algorithm processing. Experimental results confirm that the proposed scheme achieves nanosecond-level synchronization precision(±5ns). This work provides a high-precision and low-cost solution for large-scale wireless clock synchronization.

  • A 13-GS/s 9-bit Time-Interleaved Pipelined-SAR ADC With Common-Mode Regulated Floating-Inverter-Amplifier and Rapid-Tracking Bootstrapped Switch

    by Ji Guo, Jianwei Liu, Danfeng Zhai, Xinsheng Wang, Wenning Jiang, Qi Liu, Ming Liu

    This article presents a 13GS/s 9-bit 8-channel time-interleaved (TI) Pipelined-SAR (Pipe-SAR) ADC. A common-mode regulated floating-inverter-amplifier (CMR-FIA) is proposed to overcome the common-mode voltage variation due to the charge leakage through the parasitic capacitor, thereby eliminating the need for common-mode feedback (CMFB) circuitry embedded in the body of FIA. By combining an adaptively biased (AB) technique, the proposed FIA facilitates the high-speed and robust Pipe-SAR ADCs. In addition, a rapid-tracking bootstrapped signal generation is introduced to achieve high-linearity with short sampling time in an ultra-high speed sampling network. The ADC prototype is fabricated is a 28nm-CMOS process, the achieved spurious-free dynamic range (SFDR) and signal-to-noise and distortion ratio (SNDR) at the Nyquist input are 56.4dB and 41.75dB, respectively. Consuming 97mW at 13GS/s, it yields a Schreier figure of merit ( $\text{FoM}_{\mathrm {S}}$ ) of 150dB. With the proposed CMR-FIA, the ADC’s SNDR variation is within 2.48dB across the input common-mode range of 0.3V to 0.8V.


  • Open Access

    Multi-step partitioning combined with SOM neural network-based clustering technique effectively improves SAT solver performance

    by Siyu Yun, Xinsheng Wang

    As the core engine of electronic design automation (EDA) tools, the efficiency of Boolean Satisfiability Problem (SAT) solver largely determines the cycle of integrated circuit research and development. The effectiveness of SAT solvers has steadily turned into the key bottleneck of circuit design cycle due to the dramatically increased integrated circuit scale. The primary issue of SAT solver now is the divergence between SAT used in industry and research on pure solution algorithms. We propose a strategy for partitioning the SAT problem based on the structural information then solving it. By effectively extracting the structure information from the original SAT problem, the self-organizing map (SOM) neural network deployed in the division section can speed up the sub-thread solver’s processing while avoiding cumbersome parameter adjustments. The experimental results demonstrate the stability and scalability of our technique, which can drastically shorten the time required to solve industrial benchmarks from various sources.


  • Open Access

    SDNet: Sandwich Decoder Network for Waterbody Segmentation in Remote Sensing Imagery

    by Hao Ni, Jianfeng Li, Chenxu Wang, Zhiquan Zhou, Xinsheng Wang

    Waterbody extraction is essential for monitoring surface changes and supporting disaster response. However, differences in morphology, dimensions, and spectral reflectance, make it problematic to segregate waterbodies accurately in remote sensing (RS) photographs. Although self-attention (SA) and convolutional neural networks (CNN) have demonstrated strong modeling capabilities on RS image recognition, their efficiency and expressiveness still deserve further optimization. In this paper, we propose SDNet, an innovative deep learning structure designed to improve segmentation accuracy and scalability in waterbody extraction while minimizing computational costs. SDNet introduces a Two-Step Self-Attention (TSSA) strategy to selectively aggregate spatial features and a Sparse-Tight Pattern Fusion (STPF) module to capture context across various manipulation spaces, enhancing axial and space information fusion. The network's sandwich-shaped decoder structure allows for easy integration with mainstream encoders. Compared to previous influential methods, SDNet exhibits superior sensitivity in detecting small waterbodies and delivers better overall performance. Experiments performed on public benchmark datasets, like MSRWD, UAVid, and LoveDA, indicate that SDNet exceeds prior state-of-the-art techniques, with a 2%-10% increase in mIoU and a 3%-9% improvement in F1-score. On the MSRWD, SDNet attained an IoU of 94.21% for the water class, with an F1-score of 97.03% and an overall accuracy of 98.87%.


  • Salient object detection with bayesian inference based on radar and camera fusion used in UAV obstacle avoidance

    by Xiyue Wang, Xinsheng Wang, Zhiquan Zhou, Yanhong Song

    Most existing salient object detection methods are sensitive to background noise and rely on prior information in UAV obstacle avoidance applications despite detection methods witnessing rapid progress. In this paper, we propose an efficient framework for salient object detection based on radar-camera fusion and iterative Bayesian optimization. A rough salient object (RSO) image is first built through radar and camera calibration. Next, the RSO image is used to calculate the edge response based on the receptive field mechanism of the primary visual cortex to construct the contour image. Finally, the above two images and the 2D Gaussian distribution are jointly integrated into an iterative Bayesian optimization scheme to get the final salient object image. Different from typical detection methods, this method suppresses background noise by filtering out irrelevant pixels using fusion information. The Bayesian inference framework’s detection performance is improved by precise spatial prior, consisting of optimized contour and RSO images. Experimental results indicate that the presented algorithm performs well against state-of-the-art salient object detection methods on several reference datasets in different evaluation metrics.


  • Open Access

    An exploration of the solution of direct methanol fuel cell cost effectiveness

    by Tengyi Wang, Zhiwei Luo, Changsheng Wang, Yang Li, Xi Chen, Yang Tang, Xinsheng Wang, Zhiquan Zhou

    The work in this paper incorporated printed circuit board (PCB) technology into micro-direct methanol fuel cells (µDMFCs) and conjectured and verified the performance degradation factors of PCB current collectors in µDMFCs by testing different designed configuration µDMFCs. The experiment results showed that all kinds of PCB coating can benefit from the porous stainless-steel plates covering to a great extent. At the end of 48 h discharging, µDMFCs with porous stainless-steel plates between MEA and PCB coating achieved higher performance than those of the direct contacting series. It can be inferred from various types of experimental data that because of stainless-steel porous plate isolating, the impact of corrosion on the surface of the PCB electrode plate was reduced to a certain extent. The corrosion of the electrode plate was slowed down in the µDMFC discharging as a result of the passivation behavior on the iron surface and a decrease in corrosion current. Consequently, the attenuation of the PCB performance was delayed. The conclusion of this work explores a practical direction to enhance the cost-effectiveness of fuel cells, promoting the large-scale application of DMFCs in the future.


  • A Deep-Learning Method Based on the Multistage Fusion of Radar and Camera in UAV Obstacle Avoidance

    by Xiyue Wang, Xinsheng Wang, Zhiquan Zhou, Yanhong Song

    Multi-sensor information fusion technology has been widely used in the perception of unmanned aerial vehicle environments. However, the perception accuracy needs to be improved in practice since multiple sensors have consistency limitations and fused data has limited utility. A deep learning method based on the multi-stage fusion of millimeter-wave radar and camera is proposed in this paper. In the data preprocessing stage, the radar reflection point and image pixels are fused in a Gaussian-weighted way to obtain the salient image. The salient density map of each pixel relative to the radar reflection point is calculated. Then, the threshold is set to segment the salient density map to complete visual target detection. In the detection stage based on deep learning, a network structure is designed to fuse the salient image and visual target detection images at different convolution depths. The classification, location, and size of targets are regressed by training. In the post-decoding stage, the radar reflection point is fused for local non-maximum suppression. The non-maximum suppression operation is started from the radar reflection point. Different from typical detection methods, the proposed method improves detection accuracy by fusing the feature information of the radar and camera in a multi-stage process. Experimental results demonstrated that mAP0.90 increased by 3.9% and 4.3%. For complex scenarios, mAP0.50 improved by 2.4%, mAP0.75 improved by 4.9%, and mAP0.90 improved by 6.9%, indicating that the proposed method is effective compared to the state-of-the-art model (YOLOv8).


  • Open Access

    A SEIARQ model combine with Logistic to predict COVID-19 within small-world networks

    by Qinghua Liu, Siyu Yuan, Xinsheng Wang

    Since the COVID-19 epidemic, mathematical and simulation models have been extensively utilized to forecast the virus's progress. In order to more accurately describe the actual circumstance surrounding the asymptomatic transmission of COVID-19 in urban areas, this research proposes a model called Susceptible-Exposure-Infected-Asymptomatic-Recovered-Quarantine in a small-world network. In addition, we coupled the epidemic model with the Logistic growth model to simplify the process of setting model parameters. The model was assessed through experiments and comparisons. Simulation results were analyzed to explore the main factors affecting the spread of the epidemic, and statistical analysis that was applied to assess the model's accuracy. The results are consistent well with epidemic data from Shanghai, China in 2022. The model can not only replicate the real virus transmission data, but also anticipate the development trend of the epidemic based on available data, so that health policy-makers can better understand the spread of the epidemic.