Synergistic Effect of Blast Furnace Slag and Fly Ash on the Properties of Polyamide 6
- 21 September 2025
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (2)
Abstract
The use of waste products such as ground‐granulated blast furnace slag (BFS) and fly ash (FA) as fillers in polymer matrices is a relatively new approach. Polymer composites prepared with BFS and FA can be suitable candidates for applications requiring electrical insulation properties due to their improved mechanical properties, wear resistance, and thermal resistance, as well as their low electrical conductivity. The aim of this work is to investigate the synergistic effects of BFS and FA on the final structural, thermal, mechanical, morphological, and electrical conductivity properties of polyamide 6 (PA6), a thermoplastic polymer widely used in the plastic industry. When BFS/FA‐added PA6 composites prepared at ratios of 5, 10, 20, 30, and 40 wt.% using twin screw extruder and compression molding methods were characterized, the physical interactions were observed at the intermolecular level. A general decrease in tensile strength values with increasing BFS/FA content was obtained. BFS/FA particles were homogeneously dispersed in the PA6 matrix, but a weak interaction occurs at the filler–matrix interface. Concerning the electrical conductivity results, the use of BFS/FA fillers in PA6 composites improved the electrical conductivity values as intended, but the interfacial compatibility should be increased in applications requiring mechanical performance.Keywords
This publication has 47 references indexed in Scilit:
- Effect of coupling agent on polylactic acid/polypropylene and polylactic acid/polyamide 6 foam compositesJournal of Applied Polymer Science, 2023
- Mechanical properties and interfacial interactions in oleyl titanate‐treated blast furnace slag/polypropylene compositesJournal of Applied Polymer Science, 2022
- Preparation of conductive polylactic acid/high density polyethylene/carbon black composites with low percolation threshold by locating the carbon black at the Interface of co‐continuous blendsJournal of Applied Polymer Science, 2020
- Economical conductive graphite‐filled polymer composites via adjustable segregated structures: Construction, low percolation threshold, and positive temperature coefficient effectJournal of Applied Polymer Science, 2020
- Blast furnace slag or fly ash filled rigid polyurethane composite foams: A comprehensive investigationJournal of Applied Polymer Science, 2019
- High Surface Area Nano‐Boehmite as Effective Nano‐Filler for Preparation of Boehmite‐Polyamide‐6 NanocompositesAdvances in Polymer Technology, 2016
- Blast furnace slags as functional fillers on rheological, thermal, and mechanical behavior of thermoplasticsJournal of Applied Polymer Science, 2015
- Properties of talc/wollastonite/polyamide 6 hybrid compositesPolymer Composites, 2014
- Environmentally Conscious Materials and Chemicals Processing2007
- Structural and mechanical behavior of nylon 6 films part I. Identification and stability of the crystalline phasesJournal of Polymer Science Part B: Polymer Physics, 2001