Preparation and tribological properties of Ni/DLC multilayer film
Open Access
- 15 February 2024
- journal article
- research article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Abstract
Ni was selected as a transition layer and sublayer in the diamondlike carbon-based multilayered film with varied bilayer periods (from 228 to 970 nm) prepared by magnetron sputtering. The reaction between Ni- and C-containing particles was discussed, and the influences of bilayer periods on the structure and morphology, accompanied with the frictional behaviors at different loading forces (2 and 5 N), as well as the field emission properties were investigated. The results showed that Ni grew in the (111) plane, and there was no Ni–C bond or graphene formed in the film because of the relatively lower energy during deposition. Moreover, the content of sp2C in the film, the hardness, and the field emission performance exhibited an initial increase followed by a subsequent decrease with increasing bilayer periods. However, the frictional coefficient decreased owing to more graphitization with an increase of the applied load. Particularly noteworthy was that the film possessed a bilayer period of 710 nm, displayed a compact structure with a smaller grain size, and showed reduced sp2C content in the role of Ni. This resulted in sustained lower surface roughness, heightened hardness, decreased coefficient of friction, and a smaller opening electric field.Keywords
Funding Information
- Shanxi Provincial Natural Science Foundatin (202203021221070)
- Open Project of State Key Laboratory of Solid Lubrication (LSL-2214)
- Shanxi "1331 Project" for financial support
- Shanxi Provincial Natural Science Foundation (202203021211123)
This publication has 45 references indexed in Scilit:
- Improved wear resistance at high contact stresses of hydrogen-free diamond-like carbon coatings by carbon/carbon multilayer architectureApplied Surface Science, 2019
- Compositionally modulated multilayer diamond-like carbon coatings with AlTiSi multi-doping by reactive high power impulse magnetron sputteringApplied Surface Science, 2017
- Tribological properties, corrosion resistance and biocompatibility of magnetron sputtered titanium-amorphous carbon coatingsApplied Surface Science, 2016
- Effect of modulation periods on the microstructure and mechanical properties of DLC/TiC multilayer films deposited by filtered cathodic vacuum arc methodApplied Surface Science, 2015
- Influence of transition metal doping on the tribological properties of pulsed laser deposited DLC filmsCeramics International, 2015
- Chemical and morphological difference between TiN/DLC and a-C:H/DLC grown by pulsed vacuum arc techniquesApplied Surface Science, 2011
- Influence of ductile interlayers on mechanical behaviour of hard coatings under depth-sensing indentation: a numerical study on TiAlNJournal of Materials Science, 2010
- Tribological Performance of Alternating-Layered Si-DLC/DLC Films Under Humid ConditionsTribology Letters, 2009
- Micro‐Raman Studies on DLC coatingsAdvanced Engineering Materials, 2005
- Effects of normal load on nanotribological properties of sputtered carbon nitride filmsDiamond and Related Materials, 2005