The Thixoforming Process Window for Al-Si-Zn Alloys Using the Differentiation Method: The Role of Si, Heating Rate and Sample Mass
Open Access
Abstract
The effects of Si content (X = 4 to 7 wt.%), heating rate (5 to 25 °C/min) and sample mass (20 to 200 mg) on determination of the thixoforming working window by differential scanning calorimetry DSC were analyzed for the Al-Xwt.%Si-4wt.%Zn, or simply AlXSi4Zn, system. The critical lower and upper temperatures for thixoforming processing were determined by applying the differentiation method to DSC heating cycle data. Lower Si content, heating rate and DSC sample mass made identification of the working window temperatures more accurate because of the sharpening of the DSC curve when lower values of these variables were used. Data obtained when lower sample masses and heating rates were used agreed better with those obtained by Calculation of Phase Diagrams, (CALPHAD) simulation (near-equilibrium Scheil condition) for all the Si contents analyzed. Larger DSC sample masses were associated with significant heterogeneity in heat transfer through the sample, leading to results similar to those for a diffuse transition, an effect enhanced by an increase in the heating rate. Since Si content represented a limitation when identifying the working window by the differentiation method, alloys with high Si content should be analyzed with lower DSC masses and lower heating rates to allow more accurate determination of the interval at conditions near those used in thixoforming operations.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2015/22143-3, 2018/11802-4)
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (304921/2017-3)
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (88881.131045/2016-01)
This publication has 31 references indexed in Scilit:
- Microstructural and DSC studies of Alloy 718™ PlusThermochimica Acta, 2009
- Model-free analysis of thermoanalytical data-advantages and limitationsThermochimica Acta, 2002
- DTA investigation of the retrogression and re-ageing in some AlZnMgCu alloysThermochimica Acta, 1997
- Modulated temperature DSC measurements: the influence of the experimental conditionsThermochimica Acta, 1996
- Kinetic analysis of thermoanalytical data by extrapolating to infinite temperatureThermochimica Acta, 1995
- Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) at high pressures. Experimental techniques and selected resultsThermochimica Acta, 1994
- Analysis of DSC results by integrationThermochimica Acta, 1993
- The effect of the simultaneous variation of sample mass and heating rate in DTA and DSCThermochimica Acta, 1983
- Application fo pressure DTA (DSC) to thermal hazard evaluationThermochimica Acta, 1980
- Rate of change of reference temperature in DSC and DTAThermochimica Acta, 1971