Industrial Implementation of Aluminum Trihydrate-Fiber Composition for Fire Resistance and Mechanical Properties in Glass-Fiber-Reinforced Polymer Roofs
Open Access
Abstract
It is difficult to obtain suitable fire resistance and mechanical properties for glass-fiber-reinforced polymer (GFRP) roof material in industrial applications. Although some efforts to improve the fire resistance properties of GFRP have been carried out, in practice this sometimes degrades the mechanical properties. Therefore, the base materials, such as filler and reinforcing fiber, must be appropriately combined to simultaneously improve both fire resistance and mechanical properties. The present study examines improvements in GFRP roof material by investigating the effect of aluminium trihydrate (ATH) as a filler and the combination of a chopped strand mat (CSM) with woven roving (WR) and stitched mat (STM) fibers as the reinforcement in a composite GFRP roof structure. The roof samples were prepared following industrial machine standards using the specified materials. The mechanical properties of GFRP were evaluated using tensile, flexural and impact tests, following ASTM D638, ASTM D790 and ASTM D256 standards, respectively. The fire properties were examined through fire tests following the ASTM D635 standard. The results show that the GFRP roof composed of CSM/WR fibers had a 40% higher tensile strength (103.5 MPa) compared with the GFRP roof without CSM fibers (73.8 MPa). The flexural strength of the GFRP roof with CSM/WR fibers was also 57% higher than the roof without fibers, with a ratio of 315.61 MPa to 201 MPa. With the use of CSM/WR fibers, the fire resistance also increased by 23%, resulting in a ratio of 4.31 mm/min to 5.32 mm/min. These results demonstrate that the combination of CSM/WR fibers as a reinforcement would be an excellent option for producing an improved GFRP roof with better industrial properties, especially when producing improved GFRP roofs using a continuous lamination machine.Keywords
Funding Information
- Universitas Sebelas Maret (Hibah PNBP UNS 2022)
This publication has 29 references indexed in Scilit:
- Blends of unsaturated polyester and phenolic resins for application as fire-resistant matrices in fibre-reinforced composites: Effects of added flame retardantsPolymer Degradation and Stability, 2014
- A polycarbonate/magnesium oxide nanocomposite with high flame retardancyJournal of Applied Polymer Science, 2011
- Unsaturated polyester nanocomposites filled with nano aluminaJournal of Materials Science, 2011
- Thermal degradation and fire behaviour of unsaturated polyesters filled with metallic oxidesPolymer Degradation and Stability, 2011
- Effect of Al(OH)3 Particle Fraction on Mechanical Properties of Particle-Reinforced Composites Using Unsaturated Polyester as MatrixJournal of Failure Analysis and Prevention, 2010
- Aluminium trihydroxide in combination with ammonium polyphosphate as flame retardants for unsaturated polyester resinExpress Polymer Letters, 2009
- Effect of Laminate Configuration on the Properties of Glass Fiber-reinforced Plastics (GFRPs) Mixed CompositesJournal of Reinforced Plastics and Composites, 2005
- Interface effects on mechanical properties of particle-reinforced compositesDental Materials, 2004
- Reinforcement and matrix effects on the combustion properties of glass reinforced polymer compositesComposites Part A: Applied Science and Manufacturing, 1997
- Fire performance studies on glass‐reinforced plastic laminatesFire and Materials, 1994