Kresling origami-inspired electromagnetic energy harvester with reversible nonlinearity
Open Access
- 27 February 2024
- journal article
- research article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 33 (3) , 035043
Abstract
This paper presents an electromagnetic energy harvester based on a unique nonlinear Kresling origami-inspired structure. By introducing the equilibrium shift phenomenon, reversible nonlinearity (i.e. mixed softening-hardening behavior) empowers the proposed harvester to work in a broad frequency band, confirmed by both simulation using a dynamic model and experimentation. The prototyped device can produce the open-circuit root mean square (RMS) voltage from 0.09 V to 0.20 V in the reversibly nonlinear response region in (6.19 Hz, 9.63 Hz) and a maximum output power of 0.4956 mW at an optimum load of 18.1 Ω under the excitation of 1.1 g. Moreover, detailed research further reveals that the design parameters of Kresling origami-inspired structure and electrical and mechanical loads influence reversible nonlinearity. Increasing the tip mass and γ 0 in the M2 region of the design map strengthens the softening behavior, and enlarging the electrical load enhances the hardening behavior. The findings from this work deepen the understanding of the nonlinear behavior of Kresling origami, unveils the great potential of origami structure in energy harvesting and offers a new method to realize broadband vibration energy harvesters.Keywords
Funding Information
- China Scholarship Council (202106890027)
- National Natural Science Foundation of China (12302030)
- Catalyst Seeding General Grant administered by the Royal Society of New Zealand (20-UOA-035-CSG)
This publication has 58 references indexed in Scilit:
- Waterbomb-origami inspired triboelectric nanogenerator for smart pavement-integrated traffic monitoringNano Research, 2022
- Lightweight origami isolators with deployable mechanism and quasi-zero-stiffness propertyAerospace Science and Technology, 2022
- Triboelectric energy harvesting using an origami-inspired structureApplied Energy, 2022
- A low-frequency rotational electromagnetic energy harvester using a magnetic plucking mechanismApplied Energy, 2022
- Towards self-powered technique in underwater robots via a high-efficiency electromagnetic transducer with circularly abrupt magnetic flux density changeApplied Energy, 2021
- Current trends and prospects of tidal energy technologyEnvironment, Development and Sustainability, 2020
- Uncovering rotational multifunctionalities of coupled Kresling modular structuresExtreme Mechanics Letters, 2020
- Electromagnetic energy harvesting using magnetic levitation architectures: A reviewApplied Energy, 2020
- Toward a 0.33 W piezoelectric and electromagnetic hybrid energy harvester: Design, experimental studies and self-powered applicationsApplied Energy, 2019
- Hybrid vibration and wind energy harvesting using combined piezoelectric and electromagnetic conversion for bridge health monitoring applicationsEnergy Conversion and Management, 2018