PYPeilun Yin

Peilun Yin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Peilun Yin has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Vortex-induced vibration piezoelectric energy harvester with arch beam for multi-directional operation and self-powered sensing

    by Cuipeng Xia, Lihua Tang, Tianle Meng, Yawei Wang, Huaijun Li, Peilun Yin, Wan Sun, Weiqun Liu, Guobiao Hu, Kean C. Aw


  • Performance-boosted piezoelectric wind energy harvester via biomimetic design for self-powered sensing

    by Dong Zhang, Xiaoyu Zhang, Peilun Yin, Cuipeng Xia

    Galloping-based piezoelectric wind energy harvesting is a promising distributed and sustainable energy solution for wireless sensor nodes in structural health monitoring systems of cross-sea bridges. However, the limited output of conventional designs remains a key obstacle to achieving self-powered operation for these sensor nodes. In this study, we propose a novel biomimetic galloping-based piezoelectric energy harvester. This bio-inspired structure can promote the formation of larger recirculation zones, delay flow reattachment, and intensify the fluid-structure interaction by shortening the vortex shedding distance, resulting in an enhanced output response. To theoretically analyze the system’s output, a coupled model was developed and validated through experiments. Moreover, experimental results show that the bio-inspired energy harvester achieves a maximum RMS voltage of approximately 28.4 V, significantly higher than the 18.6 V of the conventional design, and the overall average voltage is improved by about 66.7%. In addition, with about 90 s of energy harvesting, the proposed harvester can power a wireless temperature and humidity sensor for up to 150 s. It not only provides real-time power to the sensor but also generates surplus energy for storage. The study of this bio-inspired energy harvester can offer valuable insights into the direction of bluff body structural optimization and the development of self-powered health monitoring systems.


  • Open Access

    Multi-directional and multi-modal vortex-induced vibrations for wind energy harvesting

    by Cuipeng Xia, Lihua Tang, Peilun Yin, Kean C. Aw

    A conventional vortex-induced vibration (VIV)-based energy harvester is typically restricted to capturing wind energy from a very limited range of wind directions, making it inefficient in varying wind conditions. This Letter proposes a tri-section beam configuration for VIV-based piezoelectric energy harvester to enable harnessing wind energy from varying incident angle with different vibration modes being triggered. The finite element analysis investigates the tri-section beam harvester's mode shapes and natural frequencies. A wind tunnel experiment is conducted for a comparative study of the energy output performance of the harvesters with straight and tri-section beams. The findings show that the proposed harvester with the tri-section beam can efficiently capture wind energy from a much wider range of incident angles, as opposed to the specific limited directions of its counterpart with the straight beam. The proposed harvester can also widen the lock-in speed range with a higher bending mode being triggered and achieve the optimal output power of 1.388 mW when the proposed harvester works in the second mode at a higher natural frequency, superior to that of its counterpart (0.386 mW) that can only work in the first mode. The proposed configuration sheds light on developing multi-directional and multi-modal VIV-based energy harvesters adapted to wind conditions in natural environments.


  • Open Access

    A compliant mechanism actuated bistable hybrid mode triboelectric nanogenerator

    by Zifan Li, Zhiyin Ee, William Pickett, Bhumik Patel, Wee Chen Gan, Lihua Tang, Yufeng Su, Cuipeng Xia, Peilun Yin, Kean Chin Aw

    Traditional contact-separation mode triboelectric nanogenerators (CS-TENGs) and lateral sliding mode TENGs exhibit distinct strengths and weaknesses in terms of their charge generation capability and durability. In this study, by leveraging a bistable compliant mechanism (BHM-TENG), we propose a hybrid mode TENG, which synthesizes the features of two traditional working modes to achieve both high durability and satisfactory performance. The proposed design exhibited a 78.6% surge in voltage output and a 142% surge in power density compared to CS-TENG. The design also maintains over 95% power generation capability after 100 000 cycles. Moreover, the compliant bistable mechanism offers a reliable actuation method at low frequencies, validated through experiments supported with a mathematical model. Real-world energy harvesting applications enabled by BHM-TENG are also discussed.


  • Open Access

    A multi-directional and multi-modal galloping piezoelectric energy harvester with tri-section beam

    by Cuipeng Xia, Jian Yang, Lihua Tang, Peilun Yin, Zifan Li, Bin Wang, Kean C Aw

    A traditional wind energy harvester based on galloping can only harvest wind energy from one specific direction, which fails to work efficiently in a natural erratic environment. In this study, we propose a galloping-based piezoelectric energy harvester that can collect energy from wind flow in a wide range of incident directions with multiple vibrational modes being excited. The proposed harvester is composed of a tri-section beam with bonded piezoelectric transducers and a square bluff body with splitters. Finite element analysis of the tri-section beam structure is first performed and confirms the clustered natural frequencies that ease the excitation of different modes. Then, the aerodynamic characteristics of various bluff bodies is conducted through computational fluid dynamics to compare the capability of galloping. Finally, the wind tunnel experiment is carried out to test the wind energy harvesting performance by utilizing the harvester’s multi-modal characteristics. The results of this study demonstrate that the proposed harvester can harvest wind energy in multiple directions with the capability of galloping in multiple vibrational modes, and superior performance is achieved when the second bending mode is triggered. The novel design of the harvester from this work provides a viable solution for harvesting wind energy in a natural environment with varying wind conditions.


  • Open Access

    Kresling origami-inspired electromagnetic energy harvester with reversible nonlinearity

    by Peilun Yin, Hesheng Han, Lihua Tang, Xing Tan, Muxuan Guo, Cuipeng Xia, Kean Chin Aw

    This paper presents an electromagnetic energy harvester based on a unique nonlinear Kresling origami-inspired structure. By introducing the equilibrium shift phenomenon, reversible nonlinearity (i.e. mixed softening-hardening behavior) empowers the proposed harvester to work in a broad frequency band, confirmed by both simulation using a dynamic model and experimentation. The prototyped device can produce the open-circuit root mean square (RMS) voltage from 0.09 V to 0.20 V in the reversibly nonlinear response region in (6.19 Hz, 9.63 Hz) and a maximum output power of 0.4956 mW at an optimum load of 18.1 Ω under the excitation of 1.1 g. Moreover, detailed research further reveals that the design parameters of Kresling origami-inspired structure and electrical and mechanical loads influence reversible nonlinearity. Increasing the tip mass and γ 0 in the M2 region of the design map strengthens the softening behavior, and enlarging the electrical load enhances the hardening behavior. The findings from this work deepen the understanding of the nonlinear behavior of Kresling origami, unveils the great potential of origami structure in energy harvesting and offers a new method to realize broadband vibration energy harvesters.


  • Harnessing energy from spring suspension systems with a compressive-mode high-power-density piezoelectric transducer

    by Min Wang, Peilun Yin, Zhongjie Li, Yi Sun, Jiheng Ding, Jun Luo, Shaorong Xie, Yan Peng, Huayan Pu


  • An active hybrid control approach with the Fx-RLS adaptive algorithm for active-passive isolation structures

    by Sun Yi, Wu Junwei, Yin Peilun, Pu Huayan, Li Zhongjie, Ding Jiheng, Luo Jun, Xie Shaorong, Peng Yan, Wang Min

    With improvements in the performance of optical equipment on spacecraft, the requirements for vibration isolation have become increasingly stringent. An efficient and reliable active hybrid control (AHC) approach used for an active-passive isolation single strut (APISS) is proposed in this paper. The APISS adopts an active-passive architecture in series as one single leg of the Stewart platform. To improve performance, the AHC approach includes a modified proportional integration force (PIF) feedback control algorithm and an improved filtered-x recursive least squares (Fx-RLS) adaptive feedforward control algorithm. The PIF is applied to establish a sky-hook damping and variable mass matrix system, and Fx-RLS is employed to compensate the vibration error caused by the base platform to the payload platform. Then, a single-DOF vibration isolation system consisting of a real-time active control system and a spectrum testing and analysis system is adopted to verify the proposed approach. The experimental results indicate that the AHC approach can effectively reduce the natural frequency by 5.02 Hz. Additionally, the resonance amplitude of the natural frequency decreases by 41.84 dB, the vibration attenuation rate reaches 99.2%, and the amplitude of the mid-frequency band is further attenuated. The experimental results highlight the effectiveness of the proposed method.