Effects of Blending Conditions and Catalyst Concentration on the Structural, Thermal and Morphological Properties of Polycarbonate/Poly (Ethylene Terephthalate) Blends
Authors:
- 24 June 2008
- journal article
- research article
- Published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials
- Vol. 57 (8) , 759-770
Abstract
The effects of mixing conditions and transesterification catalyst concentration on the structural, thermal and morphological properties of a 50/50 polycarbonate (PC)/poly (ethylene terephthalate) (PET) system were investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and by solubility measurements. From the increase in the solubility of the blends in dichloromethane and the decrease of their degree of crystallinity, it was concluded that on increasing the mixing time and the catalyst concentration, transesterification becomes more important. Thermal analysis revealed also a noticeable increase of the crystallization temperature and a slight decrease of the melting temperature. These results suggest that when transesterification occurs extensively, the crystallization tendency declines progressively until finally a completely soluble material is obtained as revealed by solubility measurements.Keywords
This publication has 27 references indexed in Scilit:
- Influence of the Activity of Transesterification Catalysts on the Phase Behavior of PC-PET BlendsMacromolecular Chemistry and Physics, 2002
- Nucleation and crystallization of PET droplets dispersed in an amorphous PC matrixJournal of Applied Polymer Science, 1998
- PET/PC blends and copolymers by one-step extrusion: 1. Chemical structure and physical properties of 5050 blendsPolymer, 1997
- Crystallization of poly(ethylene terephthalate)/polycarbonate blends. I. Unreinforced systemsJournal of Applied Polymer Science, 1996
- New catalysts for poly(ethylene terephthalate)‐bisphenol a polycarbonate reactive blendingJournal of Applied Polymer Science, 1995
- Investigation of the miscibility of polycarbonate–poly(ethyleneterephthalate) blends: Solid‐state 1H‐NMR T1 relaxation time measurements, transmission electron microscopy, and structure–properties relationshipJournal of Applied Polymer Science, 1994
- Compatibility studies of blends of polycarbonate and poly(ethylene terephthalate)Journal of Polymer Science Part B: Polymer Physics, 1990
- Molten bisphenol‐A polycarbonate—poly(ethylene terephthalate) blends. II. Kinetics of the exchange reaction.Journal of Polymer Science Part A: Polymer Chemistry, 1986
- Study of the reactions occurring during melt mixing of poly(ethylene terephthalate) and polycarbonateJournal of Applied Polymer Science, 1985
- Polyester–polycarbonate blends. II. Poly(ethylene terephthalate)Journal of Applied Polymer Science, 1979