MGMelia Guessoum

Melia Guessoum

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Melia Guessoum has a total of 27 co-authors. Here are the top co-authors by number of shared publications:

  • Magali Fois

    Centre d’Etudes et de Recherche en Thermique, Environnement et Système (CERTES EA-3481), Université Paris Est Créteil, Créteil, France

    3 shared publications
  • N. Haddaoui

    Laboratoire de Physico-Chimie des Hauts Polymères (LPCHP), Département de Génie des Procédés, Faculté des Sciences de l'Ingénieur, Université Ferhat Abbas , Sétif, Algeria

    3 shared publications
  • Nacerddine Haddaoui

    Université Ferhat Abbas Sétif1

    2 shared publications
  • Abdelhafid Merzouki

    Laboratoire de Physico-Chimie des Hauts Polymères, Département de Génie des Procédés, Faculté de Technologie, Université Ferhat Abbas Sétif 1, Setif, Algeria

    1 shared publication
  • Abdelmalek Douibi

    Laboratoire Des Matériaux Polymériques Multiphasiques (LMPMP), Département De Génie Des Procédés, Faculté De Technologie Université Ferhat ABBAS Sétif‐1 Sétif Algérie

    1 shared publication
  • F. Fenouillot-Rimlinger

    Laboratoire des Matériaux Macromoléculaires, Institut National des Sciences Appliquées (INSA), Domaine Scientifique de la Doua, bâtiment Jules Verne, 17 avenue Jean Capelle , Villeurbanne, Lyon, France

    1 shared publication

Latest Publications

  • Open Access

    Effect of different compatibilization routes on the mechanical, thermal and rheological properties of polypropylene/cellulose nanocrystals nanocomposites

    by Lilia Benchikh, Tahar Aouissi, Yazid Aitferhat, Hichem Chorfi, Ilyes Abacha, Maya Kebaili, Melia Guessoum, Abdelhafid Merzouki, Yves Grohens, Mauro Carraro, et al.

    The combination of cellulose nanocrystals (CNCs) with synthetic polymers like polypropylene (PP) offers the opportunity to create advanced nanocomposites with significant advantages in terms of mechanical properties, improved thermal stability, enhanced barrier properties, and sustainability. However, a major drawback for incorporation of CNCs in polymer matrices is their poor dispersion and incompatibility with industrial processing of many composites. This work aims to improve the dispersion of hydrophilic CNCs in a hydrophobic matrix using a method which could be adapted for the industrial level. CNCs are extracted from Ampelodesmos mauritanicus (El Diss plant) (CNCD) and incorporated in a polypropylene matrix using the masterbatch method. A first nanocomposite (PP/CNC-Gr) was prepared by adding maleic anhydride (MA) to a CNCD/PP suspension, while the second nanocomposite (PP/CNC-Co) was achieved by using a MA-grafted PP (PP-g-MA) as a third component. Concentrated masterbatch underwent solution casting followed by homogenization in a Brabender mixer. Mechanical properties comparison showed that PP/CNC-Co nanocomposites exhibited greater resistance relatively to PP/CNC-Gr nanocomposites. Moreover, PP/CNC-Co nanocomposites revealed an improved thermal stability and a higher complex viscosity, particularly with 3% of CNCD. Properties enhancements are attributed to the reaction between MA groups grafted to PP chains and hydroxyl groups of CNCDs, which enables an improved interfacial adhesion, leading to more continuous materials, as perceived from the increase in viscosity and morphology observation. On the other hand, MA reaction with PP chains and CNCD induced only a partial coverage of CNCDs during nanocrystals treatment, conferring relatively lower properties to PP/CNC-Gr nanocomposites.


  • Biocomposites based on date palm flour reinforced (70/30) polypropylene/thermoplastic starch blend: Effects of flour treatment and selective dispersion

    by Nora Toumi, Melia Guessoum, Sorya Nekkaa

    In this work, biocomposites have been prepared from a matrix consisting of polypropylene (PP) and thermoplastic starch (TPS) compatibilized using maleic anhydride (MA) grafted PP (PP-g-MA) and flour obtained from local date palm trees (DPF). To mediate the high hydrophilic character of the filler and attain an optimal dispersion, MA treated DPF (MA-DPF) was prepared via DPF esterification. Pretreated and MA treated DPF composites have been prepared by incorporating 10, 20 and 30% of the flour. MA-DPF has also been dispersed according to a second method consisting of dispersing the flour into starch/glycerol mixture before plasticizing to obtain MA-DPF modified TPS batches that were incorporated into PP to get the same matrix composition and flour loadings as for the first composites. The study of the composites properties proved the MA-DPF efficiency in increasing their impact resilience and diminishing their aptitude to water absorption. This was possible due to the association of the MA-DPF/TPS existing interactions to the better affinity of the esterified flour for the PP phase through its reduced hydrophilic nature. Also, SEM analysis confirmed that the interesting impact and water resistances of MA-DPF modified TPS filled PP composites derive from the DPF reinforced TPS phase consisting the materials.


  • Viscoelastic, thermo-mechanical and environmental properties of composites based on polypropylene/poly(lactic acid) blend and copper modified nanoclay

    by Farida Bouzidi, Melia Guessoum, Magali Fois, Nacerddine Haddaoui

    Poly(lactic acid) (PLA)/polypropylene (PP) blends composites were prepared by incorporating 3 wt.% of copper modified montmorillonite (MMT-Cu2+), obtained using cation exchange in a CuSO4 solution, and 10 wt.% of polypropylene-graft-maleic anhydride (PP-g-MA) as a compatibilizer then varying the PLA content until 50 wt.%. These materials were subjected to several investigations such as X-rays diffraction, dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and tensile and environmental tests. The DMTA analysis showed that the glassy PLA high stiffness and the PP crystalline phase compensate the decrease in the storage modulus occurring during the PP and PLA glass transitions, respectively. The variations of tan δ revealed no changes on the PP and PLA phases glass transitions temperatures which indicate the immiscibility of the two polymers, as supported by DSC analysis. Blends composites SEM micrographs stated the immiscibility of the system resulting in the poor adhesion of the PLA droplets to the PP matrix. Also, the blends composites exhibited intermediate tensile properties between those of PP and PLA. The incorporation of MMT-Cu2+ to the (50/50) PP/PLA blend accentuated its aptitude to water absorption and ensured an efficient antimicrobial activity over a satisfactorily long period of around six months.


  • Viscoelastic, thermal and environmental characteristics of poly(lactic acid), linear low-density polyethylene and low-density polyethylene ternary blends and composites

    by Noreddine Medjdoub, Melia Guessoum, Magali Fois

    Poly(lactic acid) (PLA)/(linear low-density polyethylene (LLDPE)–low-density polyethylene (LDPE)) PLA/(LLDPE-LDPE) ternary blends were prepared and characterized as function of the PLA content. (50/50) PLA/(LLDPE–LDPE) blend was also compatibilized using maleic anhydride grafted low-density polyethylene (PE-g-MA) incorporated with a concentration of 5 wt.%. PLA/(LLDPE–LDPE) blend composites have been prepared by dispersing 5 wt.% of an organophilic montmorillonite (Org-MMT), added according to two different mixing methods. These materials were subjected to several investigations such as X-rays diffraction (XRD), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry, and environmental tests. In the PLA glassy region, DMTA results showed that the storage modulus of PLA/(LLDPE–LDPE) blends decreases upon decreasing the PLA content. When PE-g-MA and Org-MMT were added, PLA exhibited a noticeable increase in the storage modulus across the glass transition region due the interface reinforcement and the enhancement of the blends stiffness. The decrease in the magnitude of the PLA tan δ peak was attributed to the decrease in the molecular mobility that could result from the increase in the interfacial resistance. XRD analysis showed that the method of dispersion of the nanoclay controls the final structural properties of the composites. (50/50) PLA/(LLDPE-LDPE) blend and composites revealed a satisfactory aptitude to biodegradation.


  • Thermal, mechanical, and viscoelastic properties of recycled poly(ethylene terephthalate) fiber‐reinforced unsaturated polyester composites

    by Wided Dehas, Melia Guessoum, Abdelmalek Douibi, José Antonio Jofre‐Reche, José Miguel Martin‐Martinez

    Recycled polyethylene terephthalate (PET) fiber has been used as reinforcing filler for unsaturated polyester resin (UPR) in order to obtain UPR/PET fiber composites. Different loadings of PET fibers (5–18 phr—parts per hundred parts of resin) of different average lengths (2–3 to 20 mm) were added to the UPR. The mechanical properties of the UPR/PET fiber composites increased up to 8 phr PET fiber loading with a length lower than 5 mm, because of the high affinity between the UPR and the PET fiber surface and the good dispersion of the fiber into the matrix. However, higher PET fiber loading caused a decrease in the mechanical properties of the composites because of the agglomeration of the fibers. The UPR/PET fiber composites presented higher storage moduli than the UPR, and an increase of the glass transition temperature in the composites reinforced with 5–8 phr of short PET fiber was found; further, higher degree of crosslinking was reached. The addition of 5–8 phr PET fiber of short length improved the thermal stability of the composites and the post‐curing was produced at higher temperature with much reduced enthalpy. POLYM. COMPOS., 39:1682–1693, 2018. © 2016 Society of Plastics Engineers


  • Influence of Surface Flour Treatment on the Thermal, Structural and Morphological Properties of Polypropylene/ Spartium Junceum Flour Composites

    by Sorya Nekkaa, Melia Guessoum, Rabie Benamara, Nacerddine Haddaoui

    Vegetable flour (Spartium junceum) reinforced polymer composites provide the customers with more alternatives in the material market due to their unique advantages. The effects of Spartium junceum (SJ) flour content and coupling agent concentration on the composite properties were studied. The above samples were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (ATG), X-ray diffraction (XRD), and scanning electron microscopy. The results obtained from XRD indicated that the incorporation of SJ flour involves a shift to lower 2θ of the other polypropylene peaks.


  • Effects of Blending Conditions and Catalyst Concentration on the Structural, Thermal and Morphological Properties of Polycarbonate/Poly (Ethylene Terephthalate) Blends

    by M. Guessoum, S. Nekkaa, N. Haddaoui

    The effects of mixing conditions and transesterification catalyst concentration on the structural, thermal and morphological properties of a 50/50 polycarbonate (PC)/poly (ethylene terephthalate) (PET) system were investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and by solubility measurements. From the increase in the solubility of the blends in dichloromethane and the decrease of their degree of crystallinity, it was concluded that on increasing the mixing time and the catalyst concentration, transesterification becomes more important. Thermal analysis revealed also a noticeable increase of the crystallization temperature and a slight decrease of the melting temperature. These results suggest that when transesterification occurs extensively, the crystallization tendency declines progressively until finally a completely soluble material is obtained as revealed by solubility measurements.


  • Effects of Reactive Extrusion and Interchange Catalyst on the Thermal Properties of Polycarbonate/Poly (Ethylene Terephthalate) System

    by M. Guessoum, N. Haddaoui, F. Fenouillot-Rimlinger

    This study was performed in order to evaluate the effects of transesterification reactions on the thermal properties of the PC/PET system, as a function of homopolymer and exchange catalyst concentrations. DSC results support well that when transesterification occurs, the glass transition temperature of the PC-rich phase decreases with the increase of the catalyst's concentration. The evaluation of the PC-rich phase composition using Wood's equation showed its strong dependence on the catalyst concentration and on the initial amount of homopolymers in the system. Furthermore, it was found that the thermal stability of the studied blends falls in between those of the two homopolymers and shows an evident improvement relatively to that of the neat PET.


  • Influence of the Addition of Tetrabutyl Orthotitanate on the Rheological, Mechanical, Thermal, and Morphological Properties of Polycarbonate/Poly(Ethylene terephthalate) Blends

    by M. Guessoum, N. Haddaoui

    The effects of the incorporation of tetrabutyl orthotitanate (TBOT) on the mechanical, thermal, rheological, and morphological properties of polycarbonate (PC)/ poly(ethylene terephthalate) PET blends were investigated. Blends were prepared using a screw extrusion with TBOT's rates varying from 0 to 0.25 phr. Rheological and mechanical investigations showed that the blends properties decreased by chain scissions induced by the degradation of PET and by volatile products release. Differential scanning calorimetry (DSC) revealed that the crystallinity of PET in PC/PET blends is affected by many parameters and does not depend only on PC and TBOT concentrations whereas dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM) support the occurrence of a little compatibilization.