Effect of adding two kinds of acid‐terminated polypropylene and surface modification using tannic acid‐iron ion complex on the mechanical properties of carbon fiber/polypropylene composites
- 16 April 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 46 (14) , 13496-13508
Abstract
This study investigated the effect of maleic anhydride‐terminated polypropylene (PPtMA) or polyacrylic acid‐terminated polypropylene (PPtAA) addition and surface modification of carbon fibers (CFs) with a tannic acid (TA)‐Fe3+ complex on the mechanical properties of CF/polypropylene (PP) composites. The addition of PPtMA or PPtAA improved the mechanical properties. Examining the effects of the amount of PPtMA and PPtAA added (compared at 5 and 20 wt% in PP) revealed that the amount that resulted in good mechanical properties was different for PPtMA and PPtAA (PPtMA: 5 wt% in PP, PPtAA: 20 wt% in PP). The TA‐Fe3+ coating further enhanced these improvements. Scanning electron microscopic analysis revealed that the addition of compatibilizers improved interfacial adhesion. In addition, the combined use of compatibilizers and CFs coated with the TA‐Fe3+ complex showed particularly strong effects. Analysis by differential scanning calorimetry showed that adding a large amount of compatibilizer reduced the crystallinity; however, in the case of PPtAA, hydrogen bonding enhanced the rigidity of the matrix resin and improved the interfacial adhesion. Therefore, even at high PPtAA concentrations, the CF/PP composite containing CFs coated with the TA‐Fe3+ complex maintained good mechanical properties.Highlights: Carbon fiber/polypropylene composites were prepared with compatibilizers. Compatibilizers were PP terminated with maleic anhydride or polyacrylic acid. The addition of either compatibilizer resulted in good mechanical properties. The surface of CFs was also modified with a tannic acid (TA)‐Fe3+ complex. The compatibilizer + complex‐modified CFs improved interfacial adhesion.Keywords
This publication has 48 references indexed in Scilit:
- Effect of polyacrylic acid‐polypropylene‐polyacrylic acid triblock copolymers with different acid content on mechanical properties of carbon fiber/polypropylene compositesPolymer Composites, 2024
- Flexible Composites of Barium Sulfate Modified by Tannic Acid Using Glycerol/Starch for X‐Ray Shielding ApplicationsMacromolecular Chemistry and Physics, 2024
- Improved interfacial properties of carbon fiber reinforced epoxy resin composite by in‐situ self‐assembled mental‐phenolic networksPolymer Composites, 2024
- Simple surface modification of barium sulfate for improving the interface of polymer composites and its x‐ray shielding propertiesPolymer Composites, 2024
- Bio‐inspired metal ion coordination cross‐linking synergistic strategy to enhance the interfacial properties of carbon fiber compositesPolymer Composites, 2023
- Enhanced Interfacial Adhesion and Properties of Polypropylene/Carbon Fiber Composites by Fiber Surface Oxidation in Presence of a CompatibilizerPolymer Composites, 2018
- Melt grafting of maleic anhydride onto polypropylene with assistance of α‐methylstyrenePolymer Engineering & Science, 2011
- Rheological behavior of polypropylene/novolac blendsJournal of Applied Polymer Science, 2007
- Rheology of poly(propylene)/clay nanocompositesJournal of Applied Polymer Science, 2003
- Physical properties of PP‐g‐AA prepared by melt extrusion and its effects on mechanical properties of PPJournal of Applied Polymer Science, 2001