Elevating the TMI threshold by incorporating QCW pumping in a high-power CW fiber oscillator
Authors:
- Xinyi DingXDXinyi Ding
- Haobo LiHLHaobo Li
- Lingfa ZengLZLingfa Zeng
- Hanshuo WuHWHanshuo Wu
- 18 December 2024
- journal article
- research article
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (1) , 125-128
Abstract
Transverse mode instability (TMI) significantly limits the power scaling of ytterbium-doped fiber lasers. In this Letter, what we believe to be a novel TMI mitigation strategy is proposed and demonstrated in a bidirectional output fiber laser. On the basis of the continuous wave (CW) pump, integrating a quasi-continuous wave (QCW) pump can effectively improve the TMI threshold of the system. In the experiment, a QCW pump with a repetition rate of 1 kHz and a duty cycle of 10% was injected into a CW-pumped fiber laser oscillator, which successfully broke the power limit and alleviated the beam quality degradation. Moreover, when applying a pump modulation depth of approximately 68%, the TMI threshold was notably increased from 624 W in the free-running condition to 1093 W at end B, which is a 469 W (75%) improvement. At this time, the beam quality factor M2 at end B is approximately 1.48, and the stimulated Raman scattering suppression ratio is about 28 dB. Compared to conventional TMI mitigation methods, this approach provides active control in the time domain of fiber lasers, without compromising the optical structures, thereby effectively mitigating TMI and offering broad application prospects.Keywords
Funding Information
- National Natural Science Foundation of China (62305390)
- Distinguished Young Scholar Foundation of Hunan Province (2023JJ10057)
- Training Program for Excellent Young Innovators of Changsha (kq2305038)
This publication has 22 references indexed in Scilit:
- Effects of fabrication parameters on the mechanical properties of short basalt‐fiber‐reinforced thermoplastic composites for fused deposition modeling‐based 3D printingPolymer Composites, 2023
- High‐Power Laser SystemsLaser & Photonics Reviews, 2022
- Transverse mode instabilityAdvances in Optics and Photonics, 2020
- Intensity noise as a driver for transverse mode instability in fiber amplifiersPhotoniX, 2020
- High gain in a dual-pass rod-type fiber amplifierJournal of the Optical Society of America B, 2020
- Modal energy transfer by thermally induced refractive index gratings in Yb-doped fibersLight: Science & Applications, 2018
- Overview of a Steady-Periodic Model of Modal Instability in Fiber AmplifiersIEEE Journal of Selected Topics in Quantum Electronics, 2014
- Removing carbonyl sulfide with metal-modified activated carbonFrontiers of Environmental Science & Engineering, 2014
- Theoretical analysis of effect of pump and signal wavelengths on modal instabilities in Yb-doped fiber amplifiers2014
- Yb-doped large-pitch fibres: effective single-mode operation based on higher-order mode delocalisationLight: Science & Applications, 2012