HLHaobo Li

Haobo Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haobo Li has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Achieving 8-kW Single-Mode Output in Low-NA Fibers via Bend-Optimized High-Loss TMI Suppression

    by Mengfan Cui, Haobo Li, Fan Wang, Chongwei Wang, Lei Zhang, Yang Liu, Hu Xiao, Meng Wang, Zilun Chen, Baolai Yang, et al.

    Fiber bending is a common and practical method to suppress transverse mode instability (TMI) in high-power fiber lasers. Tight bending and loose bending are respectively applicable to fiber lasers with different mode characteristics for TMI suppression. This study analyzes the applicability of the two approaches in conventional and low-numerical aperture (NA) fibers, finding that compared to conventional large-core fibers that predominantly use loose bending to improve TMI threshold, low-NA fibers have the potential to utilize both methods for TMI suppression, although their effectiveness differs significantly. Simulation results reveal that large-core low-NA fibers exhibit a more pronounced effect on TMI suppression by tight bending and there exists an optimal bending range for the maximum TMI threshold. Guided by these findings, a low-NA Yb-doped fiber with core/cladding diameters of 35/250 μm was fabricated and experiments were subsequently conducted. By optimizing bending, an 8-kW single-mode output tandem-pumping fiber amplifier is obtained.

  • Open Access

    Harnessing Self-Phase Modulation for Active Suppression of Transverse Mode Instability in High-Power Fiber Lasers

    by Haobo Li, Hanshuo Wu, Cheng Yang, Xin Yi Ding, Liangjin Huang, Zhiyong Pan, Xiaolin Wang, Pu Zhou

    Transverse mode instability (TMI) critically limits the power scaling of high-brightness fiber lasers. While recent experiments have empirically demonstrated that the TMI threshold can be significantly enhanced by temporal modulation, the fundamental physical mechanism governing this stabilization remains unknown, preventing the rational design of high-power systems. Here, we present a comprehensive numerical framework that incorporates nonlinear optical effects into the analysis of TMI dynamics under temporal modulation. We identify self-phase modulation as the dominant stabilizing mechanism, which generates a chaotic thermal grating to suppress resonant energy transfer between the fundamental and higher-order modes, thereby disrupting the TMI process. Building upon this insight, we derive a quantitative, predictive model that directly links modulation parameters and fiber properties to the TMI threshold. This work provides the missing physical foundation for understanding nonlinear TMI suppression and offers a powerful, predictive design tool for overcoming the power-scaling bottleneck in next-generation fiber laser systems.

  • Simultaneous enhancement of TMI and SRS suppression enabled by tuning the refractive index profile of a low-NA YDF for high power single-mode fiber laser

    by Mengfan Cui, Chongwei Wang, Haobo Li, Yang Liu, Zhiyong Pan, Hu Xiao, Zilun Chen, Zhiping Yan, Baolai Yang, Pengfei Ma, et al.

    To mitigate the limitations of stimulated Raman scattering (SRS) associated with low dopant concentrations in low numerical-aperture (NA) fibers, this study proposes a central refractive index (RI) dip design for low-NA fibers to further increase the effective mode area (MFA). Through simulations of mode-field characteristics, bending-induced distortion, and bending loss, optimal dip parameters were determined. The simulations demonstrate improved transverse mode instability (TMI) and SRS thresholds in a forward tandem-pumped amplifier using this central dip fiber (CDF). Guided by these findings, a low-NA fiber with an ultra-low central dip was fabricated. Experimentally, under forward tandem pumping and optimized coiling, the amplifier achieved a 5.6 kW output with M 2 < 1.4, demonstrating significant enhancement in both SRS and TMI thresholds by using the CDF.


  • Open Access

    High-power near-single-mode fiber laser based on low-numerical-aperture confined-doped fiber: numerical investigation and 6.74 kW experimental validation

    by Cheng Yang, Haobo Li, Pengcheng Geng, Hanshuo Wu, Yize Shen, Xin Yi Ding, Xiaoming Xi, Zhiping Yan, Chunxiao Zhao, Suyu Wang, et al.

    In this study, we present a low-numerical-aperture (NA) confined-doped fiber architecture that synergistically mitigates transverse mode instability (TMI) through combined optical waveguide engineering and spatially tailored gain distribution. The individual and combined benefits of low-NA fiber design and the confined-doped fiber design strategy on TMI mitigation are numerically investigated. Building upon these theoretical analyses, a self-developed fiber, featuring a core/cladding diameter of approximately 26/400 μm, a core NA of approximately 0.045 and a core doping ratio of approximately 75%, is fabricated. Further experimental validation in a master oscillator power amplifier demonstrates 6.74 kW output power with near-single-mode ( M ${}^2\sim$ 1.49) beam quality, validating the design’s efficacy. This study establishes a novel fiber design paradigm that concurrently addresses TMI mitigation, beam quality maintenance and power scalability, offering a viable pathway toward robust high-power fiber laser sources with near-diffraction-limited beam quality.


  • Unveiling the mechanism of dynamic transverse mode instability mitigation through static mode degradation: a study in the two-mode fiber lasers

    by Haobo Li, Hanshuo Wu, Cheng Yang, Xinyi Ding, Liangjin Huang, Zhiyong Pan, Xiaolin Wang, Pu Zhou

    Dynamic transverse mode instability (TMI) has become one of the primary limitations for power scaling of high-power fiber lasers. Experimental evidence has shown that static mode degradation can suppress the dynamic TMI effect. This study reveals the physical mechanisms behind the mitigation of dynamic TMI in two-mode fiber lasers through static mode degradation. Using a dynamic TMI model based on the two-beam coupling theory, we differentiate the impacts of relative intensity noise and the proportion of higher-order mode in the seed on TMI. Static mode degradation modifies the transverse gain distribution, thereby affecting the overlap between the thermally induced refractive index grating and the interference light field, which inhibits dynamic mode coupling. Our findings indicate that the effectiveness of this suppression is significantly influenced by the gain saturation. By enhancing gain saturation through strategies such as optimizing the pump injection direction, adjusting the pump wavelength, and reducing the core-to-cladding ratio, the suppression of TMI can be maximized, which is essential for advancing the performance and stability of these laser systems.


  • Elevating the TMI threshold by incorporating QCW pumping in a high-power CW fiber oscillator

    by Xinyi Ding, Haobo Li, Lingfa Zeng, Hanshuo Wu, Hanwei Zhang, Xiaolin Wang, Yu Ning, Fengjie Xi

    Transverse mode instability (TMI) significantly limits the power scaling of ytterbium-doped fiber lasers. In this Letter, what we believe to be a novel TMI mitigation strategy is proposed and demonstrated in a bidirectional output fiber laser. On the basis of the continuous wave (CW) pump, integrating a quasi-continuous wave (QCW) pump can effectively improve the TMI threshold of the system. In the experiment, a QCW pump with a repetition rate of 1 kHz and a duty cycle of 10% was injected into a CW-pumped fiber laser oscillator, which successfully broke the power limit and alleviated the beam quality degradation. Moreover, when applying a pump modulation depth of approximately 68%, the TMI threshold was notably increased from 624 W in the free-running condition to 1093 W at end B, which is a 469 W (75%) improvement. At this time, the beam quality factor M2 at end B is approximately 1.48, and the stimulated Raman scattering suppression ratio is about 28 dB. Compared to conventional TMI mitigation methods, this approach provides active control in the time domain of fiber lasers, without compromising the optical structures, thereby effectively mitigating TMI and offering broad application prospects.


  • Open Access

    Theoretical Study on Transverse Mode Instability in Raman Fiber Amplifiers Considering Mode Excitation

    by Shanmin Huang, Xiulu Hao, Haobo Li, Chenchen Fan, Xiao Chen, Tianfu Yao, Liangjin Huang, Pu Zhou

    Raman fiber lasers (RFLs), which are based on the stimulated Raman scattering effect, generate laser beams and offer distinct advantages such as flexibility in wavelength, low quantum defects, and absence from photo-darkening. However, as the power of the RFLs increases, heat generation emerges as a critical constraint on further power scaling. This escalating thermal load might result in transverse mode instability (TMI), thereby posing a significant challenge to the development of RFLs. In this work, a static model of the TMI effect in a high-power Raman fiber amplifier based on stimulated thermal Rayleigh scattering is established considering higher-order mode excitation. The variations of TMI threshold power with different seed power levels, fundamental mode purities, higher-order mode losses, and fiber lengths are investigated, while a TMI threshold formula with fundamental mode pumping is derived. This work will enrich the theoretical model of TMI and extend its application scope in TMI mitigation strategies, providing guidance for understanding and suppressing TMI in the RFLs.

  • Theoretical and experimental investigation on the gain filtering effect in the high-power fiber oscillator using confined-doped fiber

    by Haobo Li, Hanshuo Wu, Ruixian Li, Liangjin Huang, Hu Xiao, Huan Yang, Zhiping Yan, Zhiyong Pan, Pu Zhou


  • Open Access

    Transverse mode instability mitigation in a high-power confined-doped fiber amplifier with good beam quality through seed laser control

    by Hanshuo Wu, Haobo Li, Yi An, Ruixian Li, Xiao Chen, Hu Xiao, Liangjin Huang, Huan Yang, Zhiping Yan, Jinyong Leng, et al.

    In this work, a confined-doped fiber with the core/inner-cladding diameter of 40/250 μm and a relative doping ratio of 0.75 is fabricated through a modified chemical vapor deposition method combined with the chelate gas deposition technique, and subsequently applied in a tandem-pumped fiber amplifier for high-power operation and transverse mode instability (TMI) mitigation. Notably, the impacts of the seed laser power and mode purity are preliminarily investigated through comparative experiments. It is found that the TMI threshold could be significantly affected by the seed laser mode purity. The possible mechanism behind this phenomenon is proposed and revealed through comprehensive comparative experiments and theoretical analysis. Finally, a maximum output power of 7.49 kW is obtained with the beam quality factor of approximately 1.83, which is the highest output power ever reported in a forward tandem-pumped confined-doped fiber amplifier. This work could provide a good reference and practical solution to improve the TMI threshold and realize high-power high-brightness fiber lasers.


  • Open Access

    Influence of Gain Saturation Effect on Transverse Mode Instability Considering Four-Wave Mixing

    by Haobo Li, Liangjin Huang, Hanshuo Wu, Zhiyong Pan, Pu Zhou

    Transverse mode instability (TMI) has been recognized as onse of the primary limiting factors for the average power scaling of high-brightness fiber lasers. In this work, a static model of the TMI effect based on stimulated thermal Rayleigh scattering (STRS) is established while considering the four-wave mixing (FWM) effect. The focus of the model is to theoretically investigate the TMI phenomenon and threshold power dominated by FWM. The gain saturation effect and fiber laser system parameters, such as seed power, pumping direction, and core numerical aperture, which have not been considered in the previous perturbation theory model, are also investigated. This work will enrich the perturbation theory model and extend its application scope in TMI mitigation strategies, providing guidance for understanding and suppressing TMI.