Hall-Petch relationship of interstitial-free steel with a wide grain size range processed by asymmetric rolling and subsequent annealing
Authors:
- Bin FuBFBin Fu
- Chenghao PeiCPChenghao Pei
- Hongbo PanHPHongbo Pan
- Yanhui GuoYGYanhui Guo
- Liming FuLFLiming Fu
- Aidang ShanASAidang Shan
Open Access
- 1 November 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (11) , 116516
Abstract
Asymmetric rolling (ASR) is an efficient processing for fabricating ultrafine-grained (UFG) materials. In the present investigation, interstitial-free (IF) steels with the grain size ranged from 500 nm to 500 μm were obtained by asymmetric rolling and subsequent annealing. The evolution of microstructures and mechanical properties of IF steel were studied. Accordingly, the Hall-Petch relationship of IF steel with a wide grain size range was established. It was found that ultimate tensile strength (UTS) corresponds well to the Hall-Petch relationship over the whole grain size range. However, the yield strength (YS) and hardness deviated from the Hall-Petch relationship as the grain size is larger than 100 μm, which is mainly attributed to the slight effect of grain boundary as obstacle on the dislocation movement and/or pile-up under small deformation in coarse grain (CG).Keywords
Funding Information
- National Natural Science Foundation of China (51774006)
This publication has 37 references indexed in Scilit:
- Analysis of texture and R value variations in asymmetric rolling of IF steelJournal of Materials Processing Technology, 2012
- Development of Asymmetric Rolling for the Better Control over Structure and Mechanical Properties in IF SteelMaterials Science Forum, 2012
- Annealing behaviour and mechanical properties of severely deformed interstitial free steelMaterials Science and Engineering: A, 2011
- Structure and Mechanical Properties of Asymmetrically Rolled IF Steel SheetMaterials Science Forum, 2010
- Dislocation-Source Hardening in Nanostructured Steel Produced by Severe Plastic DeformationMaterials Science Forum, 2010
- Microstructure and Mechanical Properties of Nanostructured Metals Produced by High Strain DeformationMaterials Science Forum, 2008
- Effect of Interstitial Elements on Hall–Petch Coefficient of Ferritic IronISIJ International, 2008
- Relation between Strain on Surface and Strain over Embedded Steel Bars in ASR Affected Concrete MembersJournal of Advanced Concrete Technology, 2003
- Grain Boundaries and DislocationsScience, 2002
- Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain sizeActa Materialia, 1996