Determination of optimal technological parameters of a horizontal mixer of loose compound feeds
Open Access
- 25 April 2024
- journal article
- research article
- Published by FARC of the North-East named N.V. Rudnitskogo in Agricultural science Euro-North-East
- Vol. 25 (2) , 293-300
Abstract
The quality of the compound feeds for animals and poultry directly depends not only on the components included in it but also on the type of mixer used. Horizontal mixers as compared to the vertical ones allow for a shorter period of time to obtain high-quality mixtures due to the intensification of the process of material movement by belt working bodies. The aim of the research is to determine optimal technological parameters of a horizontal mixer with a 0.3 m3 mixing chamber with a belt working body. The mixer is designed to produce mixed compound feeds of high uniformity in production lines, workshops or can be used as an independent machine for mixing loose components. The research was carried through multifactorial experiment. As the result, mathematical models of the mixer working process were obtained, two-dimensional cross sections of the response surfaces were built. The obtained mathematical models make it possible at the design stage to identify the dependence of qualitative and energy indicators on factors at the considered levels of variation. According to the results of the multifactorial experiment, it has been established that the best mixing quality of 94.8 % is achieved when the mixing chamber is loaded by 58 % at a speed of rotation of the mixer shaft of 30 min-1, mixing time of 6 minutes with simultaneous supply of the control and the main components. At the same time, the throughput is 0.78 t/h, and the specific energy consumption is 2.04 kWh/t.Keywords
This publication has 8 references indexed in Scilit:
- INTENSIFICATION OF COMPOUND FEED MIXING PROCESS IN A VERTICAL SCREW MIXERBulletin of Altai State Agricultural University, 2023
- Determination of optimal design and technological parameters of a hammer crusher with sieves in end surfacesAgricultural engineering, 2023
- The influence of changes in the technological parameters of the feed mixer on its performanceAgricultural science Euro-North-East, 2022
- EXPERIMENTAL SUBSTANTIATION OF THE OPTIMAL VALUES OF THE ANGLE OF INCLINATION AND ROTATION FREQUENCY OF THE SCREWS OF A HORIZONTAL SCREW MIXERMechanics and Technologies, 2022
- RESEARCH OF HORIZONTAL MIXER’S DESIGN-AND-TECHNOLOGICAL PARAMETERS INFLUENCE ON ITS WORKFLOW INDICATORSТехника и технологии в животноводстве, 2022
- Study of the continuous mode of mixing feed components in a mixing plantTractors and Agricultural Machinery, 2021
- Experimental feed mixer performance studyAgrarian science, 2021
- Investigation of the operating modes of a centrifugal mixer of bulk componentsVestnik Omskogo gosudarstvennogo agrarnogo universiteta, 2021