Optimization of continuous arsenic biosorption present in natural contaminated groundwater
Open Access
- 14 September 2018
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 94 (2) , 547-555
Abstract
BACKGROUND: Arsenic (As) is a serious water pollution problem in the world. In Argentina, it is related to old volcanic activities; for example, the western region of Santa Fe State has concentrations higher than 0.1 mgAs L−1. In this work, a green, sensitive method was used to determine As concentration, and its removal using chitosan in bed columns was studied. Mathematical models were used to explain sorption, and the process was optimized using statistical methods.RESULTS: Arsenic quantification was realized with a bespoke modification of the As molybdenum blue method (detection limit = 0.0048 mg L−1, quantification limit = 0.0145 mg L−1). Chitosan molar mass, pHZPC and deacetylation degree were 350 ± 10 kDa, 6.3% and 76.2%, respectively. A maximum of 68.5% was obtained for As(V) removal at optimum conditions. Raising the bed column height produced an increment in breakthrough times, and the sorption process was favoured using low flow rates. Salinity, phosphate and nitrate concentration reductions were 60%, 50% and 70%, respectively.CONCLUSIONS: Sorption studies have been carried out on groundwater, using columns packed with chitosan for arsenic removal. The process was optimized by a factorial design. Elution profiles were adjusted adequately with mathematical models. The modified analytical technique for arsenic quantification applied in groundwater, was successful. © 2018 Society of Chemical IndustryKeywords
Funding Information
- University of Nevada, Reno
- Consejo Nacional de Investigaciones Científicas y Técnicas
This publication has 26 references indexed in Scilit:
- Arsenic bioremediation by low cost materials derived from Blue Pine (Pinus wallichiana) and Walnut (Juglans regia)Ecological Engineering, 2013
- Parametric Optimization of Selenite and Selenate Biosorption Using Wheat Bran in Batch and Continuous ModeJournal of Chemical & Engineering Data, 2010
- Characterization of biosorption process of As(III) on green algae Ulothrix cylindricumJournal of Hazardous Materials, 2009
- Batch and column studies of biosorption of heavy metals by Caulerpa lentilliferaBioresource Technology, 2008
- Extraction and characterization of chitin and chitosan from local sourcesBioresource Technology, 2008
- Removal of Copper(II) from Aqueous Solutions by Chitosan AdsorptionSeparation Science and Technology, 2005
- A validated 1H NMR method for the determination of the degree of deacetylation of chitosanJournal of Pharmaceutical and Biomedical Analysis, 2003
- A New Model for Heavy Metal Removal in a Biosorption ColumnAdsorption Science & Technology, 2001
- Heterogeneous Ion Exchange in a Flowing SystemJournal of the American Chemical Society, 1944
- The Viscosity of Dilute Solutions of Long-Chain Molecules. IV. Dependence on ConcentrationJournal of the American Chemical Society, 1942