SBSebastián E. Bellú

Sebastián E. Bellú

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sebastián E. Bellú has a total of 25 co-authors. Here are the top co-authors by number of shared publications:

  • Juan Carlos González

    Rosario Chemistry Institute-CONICET (IQUIR), Rosario S2002LRK, Argentina

    3 shared publications
  • Fernando A. Bertoni

    Área Química General e Inorgánica, Departamento de Química-Física, Facultad de Ciencias Bioquímicas y Farmacéuticas, Universidad Nacional de Rosario, Suipacha 531, S2002LRK Rosario, Santa Fe, Argentina; Instituto de Química de Rosario-CONICET, Suipacha 570, S2002LRK Rosario, Santa Fe, Argentina

    2 shared publications
  • Juan C. González

    Área Química General e Inorgánica, Departamento de Química-Física, Facultad de Ciencias Bioquímicas y Farmacéuticas, Universidad Nacional de Rosario, Suipacha 531, S2002LRK Rosario, Santa Fe, Argentina; Instituto de Química de Rosario-CONICET, Suipacha 570, S2002LRK Rosario, Santa Fe, Argentina

    2 shared publications
  • Julián Bultri

    Faculty of Biochemical Science and Pharmacy, Centre of Photosynthetic and Biochemical Studies (CEFOBI‐CONICET) Rosario National University S2002LRK Rosario Argentina

    2 shared publications
  • Lina Gribaudo

    Rosario Chemistry Institute-CONICET (IQUIR), Rosario S2002LRK, Argentina

    2 shared publications
  • Luis F. Sala

    Área Química General e Inorgánica, Departamento de Química-Física, Facultad de Ciencias Bioquímicas y Farmacéuticas, Universidad Nacional de Rosario, Suipacha 531, S2002LRK Rosario, Santa Fe, Argentina; Instituto de Química de Rosario-CONICET, Suipacha 570, S2002LRK Rosario, Santa Fe, Argentina

    2 shared publications

Latest Publications

  • Open Access

    Elimination of Arsenic Using Sorbents Derived from Chitosan and Iron Oxides, Applying Factorial Designs

    by Marianela Batistelli, Julián Bultri, Mayra Hernandez Trespalacios, María Florencia Mangiameli, Lina Gribaudo, Sebastián Bellú, María Inés Frascaroli, Juan Carlos González

    Arsenic is highly toxic, affecting millions of people in many regions of the world. That is why developing economic and efficient technologies is imperative to eliminate it. Sorption techniques are attractive as efficient and inexpensive sorbents can be used. Chitosan is an abundant, naturally occurring, biodegradable, low-cost biopolymer that can be combined with metal oxide to enhance its removability. This work aimed to synthesize a new chitosan–magnetite-based sorbent for arsenic removal. The synthesized sorbent does not present pores, and when using FT-IR, functional groups of the chitosan and the presence of As(V) in the sorbent treated with arsenic were identified. The synthesized magnetite was characterized using XRD spectroscopy. Application of the central composite design model showed that 0.22 g of the sorbent at pH 6.0 could remove 27.6% of As(V). Kinetic data, fitted with the pseudo-first and -second order models, indicated an ion exchange sorption and activation energy of 28.1–31.4 kJ mol−1. The isotherms were fitted with the Langmuir model, indicating favorable monolayer adsorption with high affinity. The sorption energy calculated using Dubinin Radushkevich, 9.60–8.80 kJ mol−1, confirms a sorption mechanism mediated by ion exchange. The thermodynamic parameters of the process were ΔG° (−21.7/−19.7 kJ mol−1), ΔH°(16.7 kJ mol−1) and ΔS°(123.3 J mol−1 K−1).


  • Open Access

    Elimination of Arsenic in Groundwater by Sorbents Derived from Chitosan and Iron Oxides. Applying Factorial Designs

    by Marianela Batistelli, Julian Bultri, Mayra Alejandra Hernandez Trespalacios, María Florencia Mangiameli, Lina Gribaudo, Sebastian Bellù, María Ines Frascaroli, Juan Carlos González

    Arsenic is highly toxic, affecting millions of people in many regions of the world. That is why developing economic and efficient technologies is imperative to eliminate it. Sorption techniques are attractive as efficient and inexpensive sorbents can be used. Chitosan is an abundant, naturally occurring, biodegradable, low-cost biopolymer that can be combined with metal oxide to enhance its removability. This work aimed to synthesize a new chitosan-magnetite-based sorbent for arsenic removal. The synthesized sorbent does not present pores, and by FT-IR, functional groups of the chitosan and the presence of As(V) in the sorbent treated with arsenic were identified. The synthesized magnetite was characterized by XRD spectroscopy. Application of the Composite Central Design model showed that 0.22 g of the sorbent at pH 6.0 could remove 27.6% of As(V). Kinetic data, fitted with the pseudo-first and second-order models, indicated an ion exchange sorption and activation energy of 28.1-31.4 kJ mol-1. The isotherms were fitted with the Langmuir model, indicating a favourable monolayer adsorption with high affinity. The sorption energy, calculated by Dubinin-Radushkevich, 9.60-8.80 kJ mol-1, confirms a sorption mechanism mediated by ion exchange. The thermodynamic parameters of the process were ΔG°(-21.7/-19.7 kJ mol-1), ΔH°(16.7 kJ mol-1) and ΔS°(123.3 J mol-1 K-1).


  • A continuous method for arsenic removal from groundwater using hybrid biopolymer‐iron‐nanoaggregates: improvement through factorial designs

    by Marianela Batistelli, Bárbara P Mora, Florencia Mangiameli, Nadia Mamana, Gerardo Lopez, María F Goddio, Sebastián Bellú, Juan C González

    BACKGROUND: Due to a variety of toxicological problems, the presence of As(V) in aquifers is a significant concern. Sorption using chitosan doped with iron nanoaggregates results in a green and cheap methodology for its elimination.RESULTS: The hybrid sorbent was characterized by SEM, EDS, TGA, XRD, and FTIR spectroscopy. Its stability against pH and time was determined by ICP‐MS, while conventional analytical techniques verified its Fe content. The sum of an individual As(V) removal capacity by chitosan and iron nanoaggregates was smaller than that of the hybrid sorbent, indicating the existence of synergy.CONCLUSION: This study demonstrates the great capacity of the hybrid sorbent to eliminate As(V) working with a continuous system (columns). The additional use of a factorial design allows for determining of optimal operating values to optimize two responses. In other words, in this multi‐response system, column service time (tb) was minimized and, at the same time, it maximized the volumes of purified water obtained ([As(V)] −1) using desirability function. © 2020 Society of Chemical Industry (SCI)


  • Open Access

    Optimization of continuous arsenic biosorption present in natural contaminated groundwater

    by Bárbara E. Pérez Mora, Sebastián E Bellú, María F Mangiameli, Silvia I García, Juan C. González

    BACKGROUND: Arsenic (As) is a serious water pollution problem in the world. In Argentina, it is related to old volcanic activities; for example, the western region of Santa Fe State has concentrations higher than 0.1 mgAs L−1. In this work, a green, sensitive method was used to determine As concentration, and its removal using chitosan in bed columns was studied. Mathematical models were used to explain sorption, and the process was optimized using statistical methods.RESULTS: Arsenic quantification was realized with a bespoke modification of the As molybdenum blue method (detection limit = 0.0048 mg L−1, quantification limit = 0.0145 mg L−1). Chitosan molar mass, pHZPC and deacetylation degree were 350 ± 10 kDa, 6.3% and 76.2%, respectively. A maximum of 68.5% was obtained for As(V) removal at optimum conditions. Raising the bed column height produced an increment in breakthrough times, and the sorption process was favoured using low flow rates. Salinity, phosphate and nitrate concentration reductions were 60%, 50% and 70%, respectively.CONCLUSIONS: Sorption studies have been carried out on groundwater, using columns packed with chitosan for arsenic removal. The process was optimized by a factorial design. Elution profiles were adjusted adequately with mathematical models. The modified analytical technique for arsenic quantification applied in groundwater, was successful. © 2018 Society of Chemical Industry


  • Application of chitosan in removal of molybdate ions from contaminated water and groundwater

    by Fernando A. Bertoni, Juan C. González, Silvia I. García, Luis F. Sala, Sebastián E. Bellú


  • Removal of molybdate anions from contaminated waters by brown algae biomass in batch and continuous processes

    by Betina Carnevale, Patricia Blanes, Luis F Sala, Sebastián E Bellú

    BACKGROUND: In recent years, the discharge of heavy metal ions in natural waters has become a serious problem. Among the various techniques that have been employed for heavy metal removal, adsorption is highly effective and economical because low‐cost adsorbents can be employed. Brown algae are a potential biosorbent because of their high uptake capacities for various heavy metal ions. Petalonia fascia biomass immobilized in an agar matrix was tested as a new removal agent of MoVI from contaminated waters.RESULTS: Sorption studies were performed in batch and continuous systems. Petalonia fascia has a high adsorption capacity (1376 ± 2 mg g−1) at 20 °C and pH 1.0. Participation of hydroxyl and carboxylate functional groups in the adsorption of molybdate anions was confirmed by FT‐IR analysis. SEM images showed that morphological surface changes happen after MoVI sorption. Mean free energies of sorption and activation parameters demonstrate that the sorption mechanism was chemical sorption. MoVI sorption onto brown seaweed surface was spontaneous and exothermic. Petalonia fascia has an energetically heterogeneous surface. Continuous sorption data were best fitted by a modified dose–response model. Scale‐up of the sorption processes was achieved applying a bed depth service time (BDST) model. The critical bed depth, Z0 was 1.7 cm.CONCLUSIONS: Petalonia fascia biomass is a good adsorbent material for MoVI and it can be used in fixed bed columns for the purification of MoVI contaminated effluents. The high value of qmax and the low cost of this seaweed make this biomass a good sorbent for use in continuous treatment of groundwater and effluents contaminated with molybdate anions. © 2016 Society of Chemical Industry