Abstract
This paper presents a three‐dimensional finite element investigation of the vibration characteristics of concrete sandwich panels with diagonal bar connectors, focusing on how connector design influences natural frequencies and mode shapes to improve sound insulation. Using ABAQUS, we developed a numerical model incorporating concrete wythes, an expanded polystyrene (EPS) foam core, and dumbbell‐shaped hybrid glass fiber‐reinforced polymer (GFRP)‐steel connectors. A parametric study examined the effects of boundary conditions, connector inclination angle (30°, 45°, 60°), connector material (hybrid GFRP‐steel vs. GFRP alone), core material (graphite polystyrene [GPS] vs. EPS foam), connector distribution, and panel aspect ratio (2.8:1 vs. 1:1). The fixed‐fixed boundary condition, yielding a fundamental frequency of 56.03 Hz, was selected as the baseline for parametric comparison due to its theoretical alignment and mode shape stability. Diagonal connectors substantially increased structural stiffness, with the 45° inclined configuration achieving a 37.9% increase in fundamental frequency over unstiffened panels, outperforming vertical connectors (29.6% increase). Shallower angles (30°) produced the highest frequencies (58.52 Hz), while steeper angles (60°) yielded lower frequencies (54.49 Hz); mode shape analysis revealed 45° as a transitional angle where bending‐torsion coupling occurs. Although the 30° configuration maximizes frequency, the 45° configuration is recommended for practical applications because it balances stiffness enhancement with regular mode shapes. Hybrid GFRP‐steel connectors produced 6.4% higher frequencies than GFRP alone, demonstrating that increased stiffness outweighs steel’s mass penalty. Core material was the most influential parameter: GPS foam ( E = 20 MPa, ρ = 23.5 kg/m 3 ) produced frequencies up to 24.7% higher than EPS foam ( E = 5 MPa, ρ = 35 kg/m 3 ) in higher modes. Square panels (1:1) exhibited fundamental frequencies 103% higher than those of rectangular panels (2.8:1). Connector and core optimization can shift natural frequencies above the critical excitation ranges (50–60 Hz) from traffic and machinery, enabling resonance avoidance without adding mass, a sustainable approach consistent with lightweight construction demands. While direct sound transmission loss calculations are beyond the scope of this purely structural modal analysis, the results suggest that shifting natural frequencies away from common excitation bands may reduce resonance‐induced sound transmission. This provides a theoretical basis for future vibroacoustic investigations aimed at quantifying the sound insulation benefits of optimized connector configurations.
Funding Information
  • National Natural Science Foundation of China (51978242)

This publication has 22 references indexed in Scilit: