Water Washing: An Efficient Solution for the Total Recovery of Construction and Demolition Wastes
Open Access
Abstract
The reuse of the finest fraction derived from recycled aggregate washing has been investigated for the manufacture of mortars. This practice contributes to the circular economy and lowers CO2 emissions in the manufacturing of construction materials. A distinction was made between concrete-rich residues (RH) and mixed concrete–ceramic wastes (RHM). Chemical and mineralogical analyses of samples collected over a two-year period revealed consistent homogeneity over time. The RH residues are richer in CaO, primarily as calcite. Conversely, higher ceramic content in the waste correlates with increased SiO2, Al2O3, and K2O concentrations, predominantly as phyllosilicates and feldspars. Ettringite and portlandite occur in trace amounts. DTA-TG analysis reveals the presence of minor contents of portlandite and C-S-H gel. Mortars were prepared by replacing 10%, 20%, and 30% of Portland cement (OPC) with concrete-derived (RH) and mixed concrete–ceramic (RHM) wastes. At 10% and 20% substitution, both wastes yielded similar strengths, confirming their high potential for masonry mortars without prior treatment. However, at 30% replacement, RH provided markedly higher compressive and flexural strengths than RHM, likely due to a greater presence of the C-S-H gel phase in concrete waste. While 10% and 20% replacements successfully meet the 70% Strength Activity Index (SAI) threshold, a 30% limit severely reduces strength. Consequently, substitutions of 30% or higher require mechanical or thermal activation to enhance CDW reactivity. Given the minimal performance gap between RH and RHM, processing mixed CDW streams uniformly is recommended to maximize economic viability and ensure batch homogeneity in industrial washing plants.Keywords
Funding Information
- Spanish Ministry of Economy and Competitiveness (MICIU/AEI/10.13039/5011000011033)
- European Regional Development Fund
- Catalan Agency for Business Competitiveness (ACE091/23/000976)
- Agència de Gestió d'Ajuts Universitaris i de Recerca (SGR 01041)
- Agència de Gestió d'Ajuts Universitaris i de Recerca (SGR 0026)
This publication has 71 references indexed in Scilit:
- Low-carbon cementitious materials from industrial wastes: synergistic sulfate-alkali activation of granulated blast furnace slag and lithium slagWaste Disposal & Sustainable Energy, 2026
- The effect of green supply chain management practices in reduction of construction wastes and carbon emission in BangladeshJournal of Material Cycles and Waste Management, 2024
- Applying Circular Economy to Construction Industry through Use of Waste Materials: A Review of Supplementary Cementitious Materials, Plastics, and CeramicsCircular Economy and Sustainability, 2022
- The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical reviewCement and Concrete Composites, 2020
- Mechanical properties and water absorption of cement composites with various fineness and contents of waste brick powder from C&D wasteCement and Concrete Composites, 2020
- Microstructure of cement paste incorporating high volume of low-grade metakaolinCement and Concrete Composites, 2020
- An investigation on the recycling of hydrated cement from concrete demolition wasteCement and Concrete Composites, 2015
- Alkaline Activation of Ceramic Waste MaterialsWaste and Biomass Valorization, 2013
- Comparison of test methods to assess pozzolanic activityCement and Concrete Composites, 2010
- The greening of the concrete industryCement and Concrete Composites, 2009