Cristina Fontanet
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cristina Fontanet has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Arnau Martínez
Departament d’Enginyeria Minera, Industrial i TIC, Universitat Politècnica de Catalunya Barcelona Tech, Av. Bases de Manresa 61-63, 08242 Manresa, Spain
1 shared publication - Clara Alvarado
Universitat Politecnica de Catalunya
1 shared publication - Diego Aponte
Department of Civil and Environmental Engineering, Universitat Politècnica de Catalunya (UPC-BarcelonaTech), Jordi Girona 1-3, 08034 Barcelona, Spain
1 shared publication - Hernan Anticoi
Departament d’Enginyeria Minera, Industrial i TIC, Universitat Politècnica de Catalunya Barcelona Tech, Av. Bases de Manresa 61-63, 08242 Manresa, Spain
1 shared publication - Maite Garcia-Valles
Departament de Mineralogia, Petrologia i Geologia Aplicada, Universitat de Barcelona, Carrer Martí i Franquès s/n, 08028 Barcelona, Spain
1 shared publication - Pura Alfonso
Departament d’Enginyeria Minera, Industrial i TIC, Universitat Politècnica de Catalunya Barcelona Tech, Av. Bases de Manresa 61-63, 08242 Manresa, Spain
1 shared publication
Latest Publications
- Open Access
Water Washing: An Efficient Solution for the Total Recovery of Construction and Demolition Wastes
The reuse of the finest fraction derived from recycled aggregate washing has been investigated for the manufacture of mortars. This practice contributes to the circular economy and lowers CO2 emissions in the manufacturing of construction materials. A distinction was made between concrete-rich residues (RH) and mixed concrete–ceramic wastes (RHM). Chemical and mineralogical analyses of samples collected over a two-year period revealed consistent homogeneity over time. The RH residues are richer in CaO, primarily as calcite. Conversely, higher ceramic content in the waste correlates with increased SiO2, Al2O3, and K2O concentrations, predominantly as phyllosilicates and feldspars. Ettringite and portlandite occur in trace amounts. DTA-TG analysis reveals the presence of minor contents of portlandite and C-S-H gel. Mortars were prepared by replacing 10%, 20%, and 30% of Portland cement (OPC) with concrete-derived (RH) and mixed concrete–ceramic (RHM) wastes. At 10% and 20% substitution, both wastes yielded similar strengths, confirming their high potential for masonry mortars without prior treatment. However, at 30% replacement, RH provided markedly higher compressive and flexural strengths than RHM, likely due to a greater presence of the C-S-H gel phase in concrete waste. While 10% and 20% replacements successfully meet the 70% Strength Activity Index (SAI) threshold, a 30% limit severely reduces strength. Consequently, substitutions of 30% or higher require mechanical or thermal activation to enhance CDW reactivity. Given the minimal performance gap between RH and RHM, processing mixed CDW streams uniformly is recommended to maximize economic viability and ensure batch homogeneity in industrial washing plants.
Open AccessWater Washing: An Efficient Solution for the Total Recovery of Construction and Demolition Wastes
The reuse of the finest fraction derived from recycled aggregate washing has been investigated for the manufacture of mortars. This practice contributes to the circular economy and lowers CO2 emissions in the manufacturing of construction materials. A distinction was made between concrete-rich residues (RH) and mixed concrete–ceramic wastes (RHM). Chemical and mineralogical analyses of samples collected over a two-year period revealed consistent homogeneity over time. The RH residues are richer in CaO, primarily as calcite. Conversely, higher ceramic content in the waste correlates with increased SiO2, Al2O3, and K2O concentrations, predominantly as phyllosilicates and feldspars. Ettringite and portlandite occur in trace amounts. DTA-TG analysis reveals the presence of minor contents of portlandite and C-S-H gel. Mortars were prepared by replacing 10%, 20%, and 30% of Portland cement (OPC) with concrete-derived (RH) and mixed concrete–ceramic (RHM) wastes. At 10% and 20% substitution, both wastes yielded similar strengths, confirming their high potential for masonry mortars without prior treatment. However, at 30% replacement, RH provided markedly higher compressive and flexural strengths than RHM, likely due to a greater presence of the C-S-H gel phase in concrete waste. While 10% and 20% replacements successfully meet the 70% Strength Activity Index (SAI) threshold, a 30% limit severely reduces strength. Consequently, substitutions of 30% or higher require mechanical or thermal activation to enhance CDW reactivity. Given the minimal performance gap between RH and RHM, processing mixed CDW streams uniformly is recommended to maximize economic viability and ensure batch homogeneity in industrial washing plants.