Background-Oriented Schlieren Velocimetry of Helium Coolant Flow in Additively Manufactured Channels
- 1 June 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2530-2536
Abstract
High-pressure helium gas cooling is an attractive solution for thermal management of the fusion blanket first wall, as this coolant is chemically and neutronically inert and separable from hydrogenic species. However, due to the low thermal mass of helium, geometric optimization of these channels is required to provide sufficient cooling at manageable flow rates and pumping burdens. Increasingly, analysis and optimization of these coolant channels rely on computational fluid dynamics (CFD) simulations, and these require relevant experimental data for turbulence model validation. Toward this end, a high-pressure helium gas flow visualization system has been employed to image the flow of helium in flow channels with one-sided heating, mimicking the blanket first wall environment. Flow of helium at 4 MPa pressure and flow rates up to 68 g/s (Reynolds number 57 000) is supplied to rectangular channel test sections, with uniform heating applied to the bottom wall of the channel at heat fluxes varied between roughly 50 and 130 kW/m2. A high-speed camera is used to image index of refraction (IOR) gradients in the fluid via background-oriented schlieren (BOS), and temperature and pressure instrumentation are used to characterize thermal-hydraulic performance of each channel. Cross correlation of time-resolved BOS images is then used to calculate time-averaged 2-D helium velocity fields. Flow in additively manufactured (AM) channels is examined in this manner, including both featureless channels and those containing baffling as a heat transfer enhancement. The flow distribution seen in the featureless case differs significantly from that seen in prior simulations, whereas the flow in the baffled case shows the predicted behavior of flow forced along the heated wall. This augmented flow distribution is seen to increase the heat transfer coefficient in the baffled test section. Strategies are discussed for ongoing and future validation of these simulations, with the aim of model deployment for blanket cooling design and optimization.Keywords
Funding Information
- UT-Battelle, LLC, (DE-AC05-00OR22725)
This publication has 12 references indexed in Scilit:
- Design Overview of a High-Pressure Helium Flow Visualization Apparatus for Blanket Cooling StudiesFusion Science and Technology, 2025
- Simulation of Helium Flow Visualization Apparatus for Studies of Blanket Cooling in Fusion ReactorsIEEE Transactions on Plasma Science, 2024
- Preliminary Assessment of Additively Manufactured Cooling Channel Performance for Helium-Cooled Blanket ConceptsIEEE Transactions on Plasma Science, 2024
- Qualification and Commissioning of Helium Flow Loop Experiment for Blanket Design MeasurementsFusion Science and Technology, 2023
- Large Component Simulation of an Inboard Sector of a Dual-Coolant Lead-Lithium BlanketFusion Science and Technology, 2022
- Background-Oriented Schlieren of Fuel Jet Flapping Under Thermoacoustic Oscillations in a Sequential CombustorJournal of Engineering for Gas Turbines and Power, 2018
- Thermal-hydraulics of helium cooled First Wall channels and scoping investigations on performance improvement by application of ribs and mixing devicesFusion Engineering and Design, 2016
- Background-oriented schlieren (BOS) techniquesExperiments in Fluids, 2015
- A comparison of three quantitative schlieren techniquesOptics and Lasers in Engineering, 2012
- Distributed fiber-optic temperature sensing using Rayleigh backscatter2005