Low-current blocking temperature writing of double barrier magnetic random access memory cells
Authors:
- 9 February 2004
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 84 (6) , 945-947
Abstract
A magnetic random access memory cell architecture is fabricated where the pinned layer is reversed by heating above a reduced blocking temperature with a current pulse crossing the junction, and cooled under an external applied field (word line), minimizing half-select switching of nonaddressed bits. In order to improve Joule heating and increase breakdown voltage, a double barrier structure was used, with a common antiferromagnetic layer (60 Å MnIr) two pinned 30 Å CoFe layers, and two free layers incorporating nanooxide structures. The blocking temperature was reduced to 120 °C. A TMR of 25% was achieved for both single barrier and double barrier tunnel junctions with products of and respectively. Pinned layer writing allows the definition of a three-state memory, requiring, however, a destructive read out. A significant improvement of writing efficiency is observed with the double barrier structure. A 10 ns current pulse of 9 mA/μm2 is sufficient to heat the double barrier junctions above the blocking temperature and induce pinned layer switching.
Keywords
This publication has 7 references indexed in Scilit:
- Ion-beam deposited low resistance magnetic tunnel junctions prepared by a two-step oxidation processJournal of Applied Physics, 2003
- Design of Curie point written magnetoresistance random access memory cellsJournal of Applied Physics, 2003
- Curie point written magnetoresistive memoryJournal of Applied Physics, 2000
- Vertical integration of a spin dependent tunnel junction with an amorphous Si diodeApplied Physics Letters, 1999
- Exchange-biased magnetic tunnel junctions and application to nonvolatile magnetic random access memory (invited)Journal of Applied Physics, 1999
- Progress and outlook for MRAM technologyIEEE Transactions on Magnetics, 1999
- Thermal noise limitations to 2×20-μm2 magnetoresistive memory element thresholdsJournal of Applied Physics, 1988