Characteristic Comparison for the Various Winding Methods of HTS Magnets
- 3 April 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 22 (3) , 4902907
Abstract
Recently various high temperature superconducting (HTS) conductors have been commercialized in the power applications. While a BSCCO becomes tape or wire, others coated conductors (CC) are tapes. An HTS magnet utilized with these conductors can be fabricated as a form of pancake winding or layer winding. In the case of HTS magnet using a thin and rectangular tape, the pancake winding method is satisfied in the practical cases because of its suitable features. However, one of the disadvantages of this winding method is increasing brands and splices. From this point of view, we propose a layer winding method using an HTS tape and fabricated HTS layer coils. To verify the feasibility of the proposed winding method, critical current and over-current tests are investigated in liquid nitrogen and the results are compared with those of pancake coils. In addition, operating characteristics on the condition of various winding tensions are analyzed.Keywords
This publication has 13 references indexed in Scilit:
- Electrical Test of Bifilar-Wound Pancake Limiting Module Based on Multi-Stacked Coated Conductor for Application to a Power SystemIEEE Transactions on Applied Superconductivity, 2010
- Development of a Bi-2223 HTS Magnet for 3T MRI System for Human BrainsIEEE Transactions on Applied Superconductivity, 2010
- Recent Developments in 2G HTS Coil TechnologyIEEE Transactions on Applied Superconductivity, 2009
- Experimental Layer-Wound Mock-Up Coil for HTS MRI Magnet Using BSCCO TapeIEEE Transactions on Applied Superconductivity, 2009
- GdBaCuO and YBaCuO Long Coated Conductors by IBAD-PLD Method—Enhancement of Production Speed and Critical Current in a Magnetic FieldIEEE Transactions on Applied Superconductivity, 2007
- Large intrinsic effect of axial strain on the critical current of high-temperature superconductors for electric power applicationsApplied Physics Letters, 2007
- Characteristics Analysis of a High-Tc Superconducting Power Supply Considering Flux Creep EffectIEEE Transactions on Applied Superconductivity, 2006
- Tensile fracture behaviour of RE-123 coated conductors induced by discontinuous yielding in Hastelloy C-276 substrateSuperconductor Science and Technology, 2005
- Critical current degradation behaviour in Bi-2223 superconducting tapes under bending and torsion strainsSuperconductor Science and Technology, 2003
- Characteristics of critical current of high-T/sub c/ superconducting magnets wound with various tensionsIEEE Transactions on Applied Superconductivity, 2003