Thermal Aging of Unsaturated Polyester Composite Reinforced with E-Glass Nonwoven Mat
Open Access
- 28 November 2017
- journal article
- research article
- Published by Walter de Gruyter GmbH in Autex Research Journal
- Vol. 17 (4) , 313-318
Abstract
An experiment was carried out using glass fiber (GF) as reinforcing materials with unsaturated polyester matrix to fabricate composite by hand layup technique. Four layers of GF were impregnated by polyester resin and pressed under a load of 5 kg for 20 hours. The prepared composite samples were treated by prolonged exposure to heat for 1 hour at 60-150°C and compared with untreated GF-polyester composite. Different mechanical test of the fabricated composite were investigated. The experiment depicted significant improvement in the mechanical properties of the fabricated composite resulted from the heat treatment. The maximum tensile strength of 200.6 MPa is found for 90°C heat-treated sample. The mechanical properties of the composite do seem to be very affected negatively above 100°C. Water uptake of the composite was carried out and thermal stability of the composite was investigated by thermogravimetric analysis, and it was found that the composite is stable up to 600°C. Fourier transform infrared spectroscopy shows the characteristic bond in the composite. Finally, the excellent elevated heat resistant capacity of glass-fiber-reinforced polymeric composite shows the suitability of its application to heat exposure areas such as kitchen furniture materials, marine, and electric board.Keywords
This publication has 22 references indexed in Scilit:
- Mechanical properties of pultruded glass fiber-reinforced plastic after moisteningComposite Structures, 2012
- Glass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion ImprovementMaterials, 2012
- Investigation of the long term effects of moisture on carbon fibre and epoxy matrix compositesComposites Science and Technology, 2012
- Physico-Mechanical and Degradation Properties of Banana Fiber/LDPE Composites: Effect of Acrylic Monomer and StarchComposite Interfaces, 2011
- Accelerated Ageing Tests for Evaluations of a Durability Performance of Glass-fiber Reinforcement Polyester CompositesJournal of Materials Science & Technology, 2010
- Environmental effects on thermally induced multistability in unsymmetric composite laminatesComposites Part A: Applied Science and Manufacturing, 2009
- The influence of high and low temperatures on the impact properties of glass-epoxy compositesJournal of the Serbian Chemical Society, 2007
- Heat release of polymer composites in fireComposites Part A: Applied Science and Manufacturing, 2006
- Flexural Characteristics of Sunlight-Aged Polyester Composites: Influence of Processing VariablesJournal of Testing and Evaluation, 2002
- An assessment of the properties and degradation behaviour of glass-fibre-reinforced polyester polymer concreteComposites Science and Technology, 2000